Product Name: plug set model: mr-ccn1
Content: servo amplifier connector.
Purpose: for mr-je-b input and output signals. Motor series: low inertia, small capacity. Use serial pair / incremental encoder. Rated output power: 0.1kw. Rated speed: 3000rpm. With or without holding brake: without holding brake. Without GB.
Shaft end: straight shaft mr-ccn1.
The rotor inside the servo motor is a permanent magnet. Unw two-phase electricity controlled by the servo amplifier forms an electromagnetic field. The rotor rotates under the action of this magnetic field. At the same time, the motor and its own encoder feed back signals to the driver. The driver compares the feedback value with the target value and adjusts the rotation angle of the rotor mr-ccn1
The accuracy of servo motor depends on the resolution of encoder. Servo motor series: medium inertia, small capacity. Rated output: 7.0kw. Rated speed: 2000r / min
Electromagnetic braking: without Mitsubishi mr-ccn1 oil seal: attached (Note 1, note 2, note 3). Power supply: 200V.
Note 1 It can be supported by hg-kr and hg-mr series above 0.1kw and hg-sr series. Note 2 With reducer, oil seal is not equipped.
Note 3 The boundary dimension standards of hg-kr and hg-mr series servo motors with oil seal are different. Realize the stable driving of medium capacity and medium inertia products.
structural design, mr-ccn1 is realized. High speed & high torque. Shorten positioning time and realize high-speed equipment. Reduce power on torque ripple.
By combining the number of poles and slots of Jiahua motor, the power on torque ripple is greatly reduced, and the smooth and constant speed operation of the equipment is further realized.
To improve the environmental resistance, hg-sr and hg-jr series products adopt IP67. Servo motor series: low inertia, medium and large capacity. Rated output: 9.0KW relay connector kit. Rated speed; 3000r/minã?? Electromagnetic braking: without. Power supply: 200V.
Suitable for high frequency operation or high acceleration and deceleration operation of medium, large capacity and low inertia products. To improve the environmental resistance, hg-sr and hg-jr series products adopt IP67. High speed & high torque. Shorten positioning time and realize high-speed equipment. In 100 sites, there are 100 different drive controls. In order to meet diversified and detailed site needs as much as possible,
In the configuration of mr-j4 product line, the main rich co service amplifier and co service motor product relay connector kit are provided, which can meet the different needs of different customers. Servo motor series: medium inertia, small capacity. Rated output: 0.85kw.
Series through bore slip rings are ideally suited for electric slip ring applications where signals and power need to be transferred, and a through hole is required to pass either a shaft or other feed through.
The WS030 uses Carbonr brush technology which offers several advantages over conventional slip ring contacts , low contact force and low contact wear. It provides an economical, readily available solution when a compact through-bore configuration is required.
Benefits:
Unique signal handling performance with minimal electrical circuit noise
Tight packaging to fit in the most demanding space constraints
Fully compatible with both analog and TTL control level signals
Precision ball bearings for long life
Rugged anodized aluminum construction
Available with Ethernet
Rapid delivery
2526 Electric Power Supply Components Suppliers
Short on time? Let Electric Power Supply Components sellers contact you.
Series through bore slip rings are ideally suited for electric slip ring applications where signals and power need to be transferred, and a through hole is required to pass either a shaft or other feed through.
The WS030 uses Carbonr brush technology which offers several advantages over conventional slip ring contacts , low contact force and low contact wear. It provides an economical, readily available solution when a compact through-bore configuration is required.
Benefits:
· Unique signal handling performance with minimal electrical circuit noise
Tight packaging to fit in the most demanding space constraints
Fully compatible with both analog and TTL control level signals
Precision ball bearings for long life
Rugged anodized aluminum construction
Available with Ethernet
Rapid delivery
We are specialized in producing all kinds of switching power supplies, chargers, adapters, LED power supplies, etc.
Adopts fully automated assembly line operation and produces 3 million power adapters of various types every month, with SMT, AI plug-in line, etc. on-line automatic aging testing equipment, automatic high and low temperature environmental testing equipment, ROHS, reach environmental testing equipment, EMI, EMC, EMS and other advanced testing equipment at home and abroad, the product quality has an absolute cost performance advantage in the same industry.
We adhere to the concept of high standard, refinement and zero defect, aims at manufacturing exceeding customer requirements and mutual benefit and win-win results, and operates in strict accordance with ISO9001:2008 procedures and ERP / PDM / CRM system management modes. The product defect rate is less than 100ppm.
High-current slip ring series are characterized by higher current, adopt specific design and advance technology to meet different application requirements. At present, this series we produced could be up to 800 amperes current. Please let me know your requirements, we will provide the best solution for you
Spiral vibration dampers, also known as helical vibration dampers, are used in the overhead transmission line industry to reduce the vibrations that occur on the conductor due to wind or other external factors. These dampers are typically made of a spiral-shaped metallic wire, which is wrapped around the conductor at regular intervals along its length.
The application of spiral vibration dampers on transmission lines helps to reduce the amplitude of conductor vibrations, which in turn reduces the stress on the line, and prevents damage and failure of the transmission system. These dampers can be installed on overhead transmission lines for both AC and DC systems.
In addition to reducing conductor vibration, spiral vibration dampers also provide protection against galloping, which is a large-amplitude, low-frequency vibration that can occur when the wind blows across the conductor. This phenomenon can cause significant damage to the transmission line and is a major concern for power companies.
Current Transformer Analyzer is new product created after widely adopt customers advices and deep theoretical study. It is based on the automatic FA Series Transformer Tester General which is produced by our company that is widely acclaimed and applied. The adoption of high-performance DSP and ARM, advanced manufacturing technology ensure a stable and reliable product performance, full-featured, high degree of automation, high efficiency, in the domestic leading level, they are the professional testing equipments for transformer check in power industry.
Technical Parameter
CTA-1000
Usage
CT PT
Output
0~180Vrms12Arms36Apeak value
Voltage measurement accuracy
0.1%
CT Ratio
Range
1~40000
accuracy
0.05%
PT Ratio
Range
1~40000
accuracy
0.05%
Phase
Range
2min
accuracy
0.5min
DC resistance
Range
0~300
accuracy
0.2%2m
Burden
Range
0~1000VA
accuracy
0.2%0.02VA
0.2%0.02VA
Power supply
AC220V 10%50Hz
Environmental Conditions
Operating temperature -10C~50C Humidity 90%
Weight and Dimensions
Dimensions 365 mm290 mm153mm,Weight
2526 Electric Power Supply Components Suppliers
Short on time? Let Electric Power Supply Components sellers contact you.
