Price of product ( USD price or FOB price) :
depending required quantity and specification with low price
Product origin :
South KoreaB2:E1D2:E13
Specifications Product :
Eco-friendly and high efficiency centrifugal chiller with low CO2 emission
·Energy Saving
·Improved Part Load Efficiency
·Large Tonnage Chiller
·Alternative Refrigerant
·High reliable and Convenient
·Protection of O-zone Layer
·Anit-Global Warming
COP 6.2 (energy efficiency : 0.57kW/RT)
Minimum Order Size and Packgaing details :
Packing details : Export Standard Packing
Minimum Order Size : depending required specification
Product Description :
Manfacture : Shinsung E&G Co., Ltd.
FFU is an essential device to purify air and supply clean air applicable to facilities requiring a high level of cleanliness.
EFU is installed on upper parts or sides of semiconductor and FPD production facilities to maintain the pressure inside and supply clean air to keep the inside clean.
Price of product ( USD price or FOB price) :
depending required quantity and specification
Product origin :
South Korea
Key Specifications/Special Features :
Applicable Areas
FFU: ICR, BCR Clean Rooms
EFU: ICR Clean Rooms, ME Equipment,Chambers
Quick delivery, low cost and high quality
Minimum Order Size and Packgaing details :
Applicable Areas
FFU: ICR, BCR Clean Rooms
EFU: ICR Clean Rooms, ME Equipment,Chambers
Quick delivery, low cost and high quality
Product Description ;
Manufacture : Korea Tech Co., Ltd.
Supplying Ultra-precision gears used in turbo compressor as well as steel making and general industrial gears.
Price of product ( USD price or FOB price) :
depending required quantity and specification
Product origin :
South Korea
Key Specifications/Special Features :
Quick delivery, low cost and high quality
Minimum Order Size and Packgaing details:
Packing details : Export Standard Packing
Minimum Order Size : depending required specification
Product Description :
Manufacture : Shinwoo Air Conditioning Co., Ltd.
Ceiling Cassette Type
Vertical Cabinet/Concealed Type
Low Vertical Type
Floor Concealed Type
Floor Built-in Type
Horizontal Type
Standing Type
Ceiling Built-in Type
Vertical Stack Type
Protected Cultivation
Price of product ( USD price or FOB price) :
depending required quantity and specification
Product origin :
South Korea
Key Specifications/Special Features :
Independent Control Grille Panel
Individual Angle Control
Automatic air volume control depends on number of using air wing
RS-485 communication Central Control
RS-485 communication Touch pad central Controller
Radio Frequency Wireless Communication
Quick delivery, low cost and high quality
Minimum Order Size and Packgaing details :
Packing details : Export Standard Packing
Minimum Order Size : depending required specification
3135 Electric Fans Blowers Suppliers
Short on time? Let Electric Fans Blowers sellers contact you.
Product Description :
Manufacture : Korea Tech Co., Ltd.
Supplying Ultra-precision gears used in turbo compressor as well as steel making and general industrial gears.
Price of product ( USD price or FOB price) :
depending required quantity and specification
Product origin :
South Korea
Key Specifications/Special Features :
Quick delivery, low cost and high quality
Minimum Order Size and Packgaing details :
Packing details : Export Standard Packing
Minimum Order Size : depending required specification
"A Perfect STEM Toy: Gives pupils an opportunity to use their knowledge of electric circuits and switches tomake their own mini fan.
Let's Learn:
â?¢ Make and use simple series circuits.
â?¢ Build and reinforce structures.
â?¢ Bring conceptual clarity by making real working model of fan.
â?¢ Encourage planning, observe thinking, and problem solving."
Product Characteristics
Model:Model Y9-38,Y8-39 boiler centrifugal/induced draft fan
Flow:14978-161499m3/min
Shaft power:5.5-160KW
Pressure:400-6679Pa
Port Dia:800-1600A mm
Rotating Speed:730-1450r/min
Product Introduction
Model Y9-38 and Model Y8-39 boiler centrifugal induced draft fan is the latest type of high efficiency and energy saving fan in China.It is widely applicable in the combustion of kinds of coal, and it is designed for industrial boiler (1 ~ 35T/h) with dust elimination device.
The advantage of the fan is high efficiency, wide high-efficiency operation area,low noise,stable, reliable and economical operation.
The medium by the induced draft fan is smoke gas,The maximum conveying temperature should not exceed 250ºC.In front of induced draft fan inlet,the dust elimination device with dust elimination efficiency no less than 85% must be equipped to improve the lifetime of induced draft fan.
Product Characteristics
Model:9-19,9-26
Flow:824-123090m3/h
Pressure:3253-16250Pa
Rotation speed:960-2900r/min
Power:2.2-850KW
Transmission Way:A type(4~6.3)and D type(7.1~16)
The 9-19 centrifugal fan belongs to single suction,could be made two kinds as right-handed and left-handed.Front view is taken from the end of motor,if the impeller turns clockwise,it is called right-handed ventilator,expressed by "Right";if it turns counterclock wise,called left-handed ventilator,expressed by "Left".
The air outlet position is expressed by the air outlet of shell."Clockwise"and "anticlockwise" could be made into totally six angles such as 0°,45°,90°,135°,180°,225°.
Product Characteristics
Model:9-19,9-26
Flow:824-123090m3/h
Pressure:3253-16250Pa
Rotation speed:960-2900r/min
Power:2.2-850KW
Transmission Way:A type(4~6.3)and D type(7.1~16)
The 9-26 centrifugal fan belongs to single suction,could be made two kinds as right-handed and left-handed.Front view is taken from the end of motor,if the impeller turns clockwise,it is called right-handed ventilator,expressed by "Right";if it turns counterclock wise,called left-handed ventilator,expressed by "Left".
The air outlet position is expressed by the air outlet of shell."Clockwise"and "anticlockwise" could be made into totally six angles such as 0°,45°,90°,135°,180°,225°.
2.Product Characteristic
Flow:755-56902m3/min
Power:0.75-37KW
Pressure:294-3667Pa
Rotation speed:400-40000r/min
C4-73 mainly consist of impeller,air inlet,shell,transmission part and motor.
The fan is made in to single suction,three types for the machine code 3.6C,4.5C,5.5C.
The ventilator is made two kinds as left-handed and right-handed.Front view is taken from the end of motor,if the impeller turns clockwise,it is called right-handed vi-lator,expressed by "Right";if it turns counterclock wise,called left-handed ventilator,expressed by "Left".
The air outlet position is expressed by the air outlet of shell.The adjustable range is 0°~225°."Clockwise"and "anticlockwise" could be made into total 6 angles such as 0°,45°,90°,135°,180°,225°.
Model:C4-73,C6-48
Product Characteristic
Model: Model Y5-48 Boiler Centrifugal Induced Draft Fan
Flow:2065-67803m3/min
Shaft power:2.2-110KW
Pressure:742-4483Pa
Port Dia:355-1120A mm
Rotating Speed:1000-3550r/min
Product Introduction
Model Y5-48 boiler centrifugal induced draft fan is designed for industrial boiler (1~20T/h) which burns all kinds of coal and is equipped with dust removal device.It is suitable for anywhere with appropriate intake condition and corresponding performance,but the maximum temperature should not exceed 250ºC.
In front of induced draft fan,it must set a dust elimination device to reduce the dust content of the smoke gas into the fan.According to the general usage of power plant,the dust elimination efficiency is not less than 85%.
In consideration of economy of the fan, triangle belt(C type)transmission is adopted,which can not only meet the requirement of the same tonnage boiler configuration of all kinds of dust remover with different rotating speed of one machine number, but also reduce the fan series and machine number.And It is convenient for user according to the actual situation, to choose different rotating speed to obtain the required and more ideal flow as well as pressure.
3. Product characteristics
Model: 2.8,3.2,3.6,4,4.5,5,6,6.3,7,8,10,12.5,16,20,etc.
Transmission way: 2.8~5(A type);6~12.5(C,D,E type);16~20(B type)
Flow: 565-239654 m3/h
Pressure: 166-3863 Pa
Power: 0.55-220 KW
Rotating speed: 250-2900 r/min
1. Product Introduction
Model 4-72 centrifugal blower is applicable in ventilating and conveying air and other gases that non-flammable, non-explosive, non-volatile, harmless to the human body, non -corrosive to steel in general factory and large buildings indoor. B4-72 centrifugal blower can be used for pumping flammable and volatile gases.F4-72 model is mainly used for conveying corrosive gases.But there must be no any sticky substance in the gases that Model 4-72,B4-72,F4-72 centrifugal blower conveys, and the dust and hard particles contained no more than 150mg/m3. Gas temperature should not exceed 80ºC.
1.The Particulate matter and odor contained in the air are exhausted through negative pressure fan.
2. Quickly discharge indoor hot air to the outdoor to avoid the temperature rise in the workshop.
3. Used combination with other equipment, it can improve the environment in the wet and moldy warehouse, and has the effect of ventilation and dehumidification.
4. The air flow takes away the heat of the human body. The air flow accelerates the evaporation of the sweat and absorbs the heat of the human body, so that the body feels cool.
5. Combination with other cooling equipment, the temperature in the workshop can be controlled within 28 in the hot summer, keeping cool.
Size 120 x 120 x 38mm (4.71 x 4.71 x 1.50inch)
Motor Shaded Pole
Frame Aluminum Die-Cost
Impeller PBT + 30% Fiber Glass. UL94V-0
Lead Wire 1007# 22AWG. UL/CSA
Insulation Resistance
Min 10 M 0hm at 500VDC Between Terminal and the Frame
Dielectric Strength 1 min at 1,500VAC 50/60Hz
Bearing Type B: 2 Ball Bearing. S: Sleeve Bearing
Operating Temp Ball Bearing: Within -20 ~ 80°C Sleeve Bearing: Within -10 ~ 56°C
Life Expectancy Ball Bearing: 50,000 hours at 60C
Sleeve Bearing: 20,000 hours at 45°C
Net Weight 520 grams
In order to meet the energy conservation,environmental protection and customers demand, now we recommend AirHorse brand oil-free double screw blowers,which is high efficiency,low speed,low noise,can help you save energy up to 60% and get purer air.
01: High Reliability, 24 hours running
02: Screw type reduces energy cost by an average of 30%
03: Permanent Magnet synchronous Frequency technology offers extra energy saving
04: PLC control, remote operation, Multi-machine control supplied
Key Specifications Or Special Features :
SIZE 80×80×38
Frame Type Alumium painted with plastic UL94V-0
ImpellerThermoplastic UL94V-0 P.B.T.
Insulation Resistance Min. 100 Mohm at 500 VDC between terminal {wire} {+} and frame
Bearing Double ball bearing / Sleeve bearing
Dielectric withstand1500 VAC for 1 second between terminal {wire} {+} and frame
Voltage AC 110V, 220V
Life Expectancy for Ball bearing 60,000 hours at 20
Life Expectancy for Sleeve bearing30,000 hours at 20
Operating Temperature: -2085 ordinary humidity
Storage Temperature: -30140 ordinary humidity
Ingress of Protection: IP44 / IP55
Minimum Order Size and Packgaing details :
40PCS,475*195*230,12.5KG
Key Specifications Or Special Features :
SIZE 120×120×25
Frame Type Alumium painted with plastic UL94V-0
ImpellerThermoplastic UL94V-0 P.B.T.
Insulation Resistance Min. 100 Mohm at 500 VDC between terminal {wire} {+} and frame
Bearing Double ball bearing / Sleeve bearing
Dielectric withstand1500 VAC for 1 second between terminal {wire} {+} and frame
Voltage AC 110V, 220V
Life Expectancy for Ball bearing 60,000 hours at 20
Life Expectancy for Sleeve bearing30,000 hours at 20
Operating Temperature: -2085 ordinary humidity
Storage Temperature: -30140 ordinary humidity
Ingress of Protection: IP44 / IP55
Minimum Order Size and Packgaing details :
60PCS,490*210*255,13.5KG
Key Specifications Or Special Features :
SIZE 150×150×51
Frame Type Alumium painted with plastic UL94V-0
ImpellerThermoplastic UL94V-0 P.B.T.
Insulation Resistance Min. 100 Mohm at 500 VDC between terminal {wire} {+} and frame
Bearing Double ball bearing
Dielectric withstand1500 VAC for 1 second between terminal {wire} {+} and frame
Voltage AC 110V, 220V
Life Expectancy for Ball bearing 60,000 hours at 20
Operating Temperature: -2085 ordinary humidity
Storage Temperature: -30140 ordinary humidity
Ingress of Protection: IP44 / IP55
Minimum Order Size and Packgaing details :
24PCS,430*410*355,23KG
3135 Electric Fans Blowers Suppliers
Short on time? Let Electric Fans Blowers sellers contact you.
