Copper coated wire /rubber hose wire 0.25mm
Item: Copper Plated Hose Reinforcement wire
Nominal diameter:0.2 mm
normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... ,
of course other size no problem.
Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa
(check with us please)
Material: high carbon steel grade
Surface: brass coated
Copper coated wire /rubber hose wire 0.25mm
(1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
(2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
(3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards.
(4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 .
(5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
The house of ARS BRAND RECYCLING MACHINES proudly introduces HORIZONTAL SCRAP SHEAR IN INDIA to solve all scrap processing problems of a Melting Furnace with a single machine without any labors only need one operator.
OPERATION of ADVANTAGE Brand Horizontal Scrap Shear 600
On the Scrap Shear the PLC interface should show Home Position, (in one of the 3 programs) in this position Push the Auto cycle Button and start charging the Mixed Scrap consisting of Commercial, HMS 2, HMS 1 can be put without any sorting by a Grab/Magnet into the Hopper of the Horizontal Shear, on a continuous basis, within minutes you will see the scrap sheared in size of max height 16 coming out of the front end of the Shear.
The charged scrap is first pre-compressed first hydraulically at 3 levels, densities than Sheared the cut size of max height 16 length
These 16 long pieces are perfectly fit to be charged as first charge Furnace lift the out coming scrap with magnet and take to the furnace for melting.
TYPESOF SCRAP ADVANTAGE BRAND HORIZONTAL SHEAR CAN PROCESS ;
SOLID UN NO.:2811. SOLUTION UN NO.: 2810 ;
Hazardous class : 6.1
Molecular weight:315.9
Stability:2 years in cool places avoiding light.
Storage:ã??In cool place, avoid direct sunlight
CPT specs:
Packaging: 25KG net each round cardboard drum,
4.5MT /20FCL; with pallet or without pallet
Application of CPT: Copper Pyrithione is primarily used as an antimicrobial in industrial products such as antifouling paints and in the protection and preservation of fiber, leather, and rubber.
Advantages: Copper Pyrithione is a highly effective, broad spectrum biocide used to control bacteria, algae, and fungi.
Safety: The concentrated form of Copper Pyrithione (100% active ingredients-, powder) is moderately toxic if swallowed; however, Copper Pyrithione is an emetic which means that accidental ingestion of the material should result in vomiting or purging the material out. Inhaling the concentrated dust or mist of Copper Pyrithione is considered to be highly toxic and may be fatal if inhaled. Dermal exposure to Copper Pyrithione is considered to be non-irritating. .
We are looking for substantial buyers who are end user or agent
regarding Copper Cathode.
As this matter, we can supply this good as very high quality,
competitive price and short delivery by our best service. So please notice the following specification.
- Commodity : Copper Cathode
- Origin : Congo, Zambia, Chile or Other countries.
- Purity : 99.99% min
- Term of Price : FOB Steinweg Ndola or CIF ASWP
- Payment : By BG, SBLC or Irrevocable, Non Transferable, Confirmed
Documentary L/C 100% at sight. For CIF term of payment,
The buyer can pay full amount at destination after buyer's
inspection for cargo.
- Shipment : Within 30 days after receipt of L/C or T/T.
- Capacity : 5,000mt up to 10,000mt monthly
- Loading Port : Port of Tanzania, South Africa, Chile or Other countries..
- Inspection : By SGS or equal qualified surveyor at loading port as
seller's expense and at unloading port as buyer's expense.
If you have interests and any question for above specifications,
please do not hesitate to get in touch with us and to send LOI issued
by end buyer in anytime.
Then we will provide full information such as FCO and draft SPA based
on attractive price right now. Thanks.
We are looking for substantial buyers who are end user or agent
regarding Copper Cathode.
As this matter, we can supply this good as very high quality,
competitive price and short delivery by our best service. So please notice the following specification.
- Commodity : Copper Cathode
- Origin : Congo, Zambia, Chile or Other countries.
- Purity : 99.99% min
- Term of Price : FOB Steinweg Ndola or CIF ASWP
- Payment : By BG, SBLC or Irrevocable, Non Transferable, Confirmed
Documentary L/C 100% at sight. For CIF term of payment,
The buyer can pay full amount at destination after buyer's
inspection for cargo.
- Shipment : Within 30 days after receipt of L/C.
- Capacity : 5,000mt up to 10,000mt monthly
- Loading Port : Port of Congo, Zambia, Chile or Other countries..
- Inspection : By SGS or equal qualified surveyor at loading port as
seller's expense and at unloading port as buyer's expense.
If you have interests and any question for above specifications,
please do not hesitate to get in touch with us and to send LOI issued
by end buyer in anytime.
Then we will provide full information such as FCO and draft SPA based
on attractive price right now. Thanks.
The main features of high-efficiency continuous casting mold copper tube material: high-efficiency continuous casting mold material with good thermal conductivity, high recrystallization temperature, high thermal fatigue resistance, high strength, good wear resistance, long service life, high efficiency continuous casting mold copper tube The main feature of the material is that the overall performance of the above properties of the copper tube material is optimal.
In order to improve the wear resistance of the chrome plating layer and prolong the service life of the copper tube of the mold, a nickel-cobalt alloy coating layer of 0.4-0.5 mm thick is added between the inner surface of the copper tube of the crystallizer and the chrome plating layer as a transition layer. Therefore, it is called nickel-cobalt alloy - hard chrome plating. Referred to as composite copper plated tube. The metal content is: the hardness of the coating is 300-600 HV.
Because nickel-cobalt alloy coating has good chemical corrosion resistance, thermal erosion resistance and wear resistance. It not only blocks the diffusion of Zn, S, Cd and F in the molten steel to the inner surface of the copper tube of the mold, but also acts as a binder between the inner surface of the copper tube of the crystallizer and the chrome plating layer, so that the chrome layer is wear-resistant. The performance has been greatly improved. In addition, after the chrome layer is worn, the nickel-cobalt alloy coating can continue to work instead of the chrome layer, thereby prolonging the service life of the crystallizer copper tube.
The main features of high-efficiency continuous casting mold copper tube material: high-efficiency continuous casting mold material with good thermal conductivity, high recrystallization temperature, high thermal fatigue resistance, high strength, good wear resistance, long service life, high efficiency continuous casting mold copper tube The main feature of the material is that the overall performance of the above properties of the copper tube material is optimal.
In order to improve the wear resistance of the chrome plating layer and prolong the service life of the copper tube of the mold, a nickel-cobalt alloy coating layer of 0.4-0.5 mm thick is added between the inner surface of the copper tube of the crystallizer and the chrome plating layer as a transition layer. Therefore, it is called nickel-cobalt alloy - hard chrome plating. Referred to as composite copper plated tube. The metal content is: the hardness of the coating is 300-600 HV.
Because nickel-cobalt alloy coating has good chemical corrosion resistance, thermal erosion resistance and wear resistance. It not only blocks the diffusion of Zn, S, Cd and F in the molten steel to the inner surface of the copper tube of the mold, but also acts as a binder between the inner surface of the copper tube of the crystallizer and the chrome plating layer, so that the chrome layer is wear-resistant. The performance has been greatly improved. In addition, after the chrome layer is worn, the nickel-cobalt alloy coating can continue to work instead of the chrome layer, thereby prolonging the service life of the crystallizer copper tube.
WILSON WALTON / CATHELCO / ACG / NIPPON / CAPAC / JOTUN / WILSON TAYLOR / MORGAN / KC/MME
Our specialties are:
Impressed Current Cathodic Protection Systems (ICCP)
Marine Growth Prevention Systems (MGPS)
Shaft Earthing Device (S.E.D)
Spare parts
Sacrificial Aluminum and Zinc Anodes
Fr-4 copper clad laminated sheet uses glass fiber cloth as substrate material. After being immersed with epoxy resin and then baked into prepreg sheet, several prepreg sheets are then coated with copper foil on one side or both sides, and ccl is finally formed by hot pressing and curing.
Fr-4 copper clad laminated sheet has excellent thermal stability and machinability, widely used in the manufacture of printed circuit board (pcb) for television sets, computers, communications equipment and other electronic products.
The main globle makers listed as below: wilson walton / cathelco / acg / nippon / capac / jotun / wilson taylor / morgan / kc/mme
Our specialties are:
Impressed current cathodic protection systems (iccp)
Marine growth prevention systems (mgps)
Shaft earthing device (s.E.D)
Spare parts
Sacrificial aluminum and zinc anodes
You can contact with me on whatsapp:008613623351268 or fivestarmarine@vip.163.Com
We are the one-stop service station for iccp & mgps systems when your vessel drydock in china. We provide not only spare parts/material but also technical services.
6.We could supply the copper scrap with high quality and competitive price.
1) Our copper scrap includes wires, tubes, and plates, etc.
2)The size is chips or other.
3) Copper content could neet customers need.
Copper wire scrap at 99% purity. Insulation removed through burning.
Copper wire scrap at 96% purity. Insulation removed through burning.
7.Application:
Electrical, light industry, machinery, building industry, national defense industry
Copper Scrap is industry a important sources of the raw materials All kinds of can be recycled Recycling waste production with copper
6.We could supply the copper scrap with high quality and competitive price.
1) Our copper scrap includes wires, tubes, and plates, etc.
2)The size is chips or other.
3) Copper content could neet customers need.
Copper wire scrap at 99% purity. Insulation removed through burning.
Copper wire scrap at 96% purity. Insulation removed through burning.
7.Application:
Electrical, light industry, machinery, building industry, national defense industry
Copper Scrap is industry a important sources of the raw materials All kinds of can be recycled Recycling waste production with copper
