CISCO GLC-SX-MM NEW GENUINE Have 500+ in stock for sale Warranty 365days
CISCO SFP-10G-SR Used, genuine , grade a condition Have 300+ in stock for sale Warranty 365days full tested .
Cisco SFP-10G-LR GENUINE SFP+ Module 10GBASE-LR Transceiver SMF Singlemode
. Introduction TYPE-C TO VGA+USB3.0+PD multi-function converter.VGA port can connect with projector/display/TV and other big screen display, support 1920*1080P output. USB3.0port can connect with U disk/ mouse/ keyboard/ mobile hard disk/ blue-tooth and other USB port devices. TYPE-C PD charging function, supply 60w charging power for Pad/laptop with TYPE-C port, while they are reading data/ output video. Let you be good at playing expansion application of devices, no worry about electricity consumption of computer office or recreation. . Parameters 1.Adopts VL100 high performance and low power consumption digital conversion chip, stable VGA signal transmission. 2.Aluminum-magnesium alloy shell, CNC treatment technology, simple and durable. 3.TYPE-C port supports positive and negative insert. 4.Provide function expansion application for laptop with TYPE-C port, at the same time TYPE-C PD can supply 60w charging power. 5.USB3.0 port transmission speed is as high as 5Gbps 6.VGA high definition audio and video output, support 1920*1080P high definition image quality, support screen expansion, extension and mirror image mode. 7. Electrostatic discharge voltage protection: ±8KV 8. Working temperature 40-50 (ambient temperature 20) 9. Electrical specification Rated input voltage: DC 5V\12V\20V Input current: 2A\1.5A\3A 10. Product specification: 80mm*51.4mm*14mm Net weight:65g
1. Compatible with rs232, rs485 tia/eia standard 2. Automatically send/receive data, without external traffic control signals 3. Communication rate: 300-38400bps 4. Communication distance: 1.2km(9600bps) 5. Can connect 32pcs rs232 or rs485 devices.
Our featured products automatic transfer switch, circuit breaker, contactor, pilot light,relay, SPD, etc. with solid quality and considerable price and could equip them with enclosure. 125A-1600A Manual Changeover Switch 1.RDGLZ-125-3150A is applied to changeover two groups of low voltage electric circuit or two groups of load devices or safety isolation. 2.Mode of operation: Direct operation:handle is installed on the switch Operation outside:handle is installed outside the door of power distribution board. 3.The product with observation window can be provided according to the demand to observe directly the on and off state of contact. 4.It have three poles and four poles (three poles + on and off neutral pole) 5.Two groups of auxiliary contacts can be assembled. 6.Extended shaft is used for the operation outside the board. 7.Mechanical performance and electrical performance are correspond to RDGL-125A-3150A property 8.The bridge connecting conductor can provided to connect the inlet or outlet terminals of the switch. Note:The bridge connection is chosen,and it need to indicate the inlet or outlet connection with it.
Radin Electric provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. Product NameRDS3 Series Dual Power Automatic Transfer Switch TypePC Type Material Of CoverPC StandardGB/T14048.11 Poles3P/4P Current16A-630A Controller TypeA: Basic type single phase monitor B:Standard type three phase monitor + fire-fighting,generator control C: Intelligent type three phase monitor+fire-fight, generator control+LCD display Use CategoryAC-33B TypeRDS3-125RDS3-250RDS3-630 Rated Working current (A) le16A-125A140A-250A315A-630A Rated Working voltage (V) Ue400400400 Rated Insulation voltage (V) Ui800800800 Rated short time withstand current (KA,rms) Icw10KA (200MS)10KA (200MS)25KA (200MS) Rated short circuit making capacity (KA,peak) Icm20KA30KA50KA Rated control power supply voltage (V) Us230V/50HZ230V/50HZ230V/50HZ Contact transfer time (s)1.51.82 About ATS NEW FEATURES ARRIVAL: 1, RS485 communication function available with RDS3 type. 2, Generator exerciser timer (Engine exerciser) is available, user can set the generator start daily, weekly or monthly. You can also choose the generator exerciser load mode, to test the generator on load or off-load. It is applied to the place where generator is not frequently used. 3, Under manual mode, by press "+" button to start or stop the generator manually. 4, High and low Frequency (Hz) protection. 5, ATS setting menu with password protected. RDS3 Series PC class dual power Auto transfer switch, mainly used in two way power supply system with rated voltage below 400V, AC 50/60Hz, rated current up to 630A, when one power supply abnormal, then it transfer between two power supply system, to ensure the power supply reliablity and safety. The ATS have " Main Power", "Backup Power" and "Two way OFF" positions, with higher breaking and making capacity, it not only can meet normal load transfer, but also can meet high inductive impedance or big motor load transfer, meanwhile due to have high short time withstand current capacity, no need special SPCD, doesn't affect the selective of inside circuit, meanwhile it also can meet the application at big capacity power supply side. Product confirm to GB/T14048.11 Standard RDS3 Advantages: a. Control power voltage
Load Change Over Switch ATS Power Switch for Generators Radin Electric provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. RDS2 series Auto changeover switch mainly used for distribution or electromotor network under 50Hz, rated voltage 380V, rated DC voltage 220V, and rated current 16A to 3200A, change over between main power and backup power, mutual work as backup power system and city power and Generator power. At the same time, it can act as disconnector for the un-frequency ON and OFF circuit or lines. Such product are widely used in the power transmission and distribution system and atomization system of important site which power off is not allowed, such as fire-fighting, hospital, bank, high buildings etc. RDS2 Auto Transfer Switch Equipment (ATSE), is integrate the switch and logical control together, no need extra controller, is an electromechanical integration auto transfer switch, with voltage monitoring, frequency monitoring, communication port, electrical and mechanical interlock functions etc., can achieve auto control, remote motor control and emergency manual control. Operation is achieve by logical control board with various logical commands to managing the motor, gear-box running, motor with spring energy storage, instant release accelerating mechanism, quickly open and close the circuit or make quick transferring, through visible status to make sure the safety isolation, greatly improved the every electrical and mechanical performance. RDS2 ATS integral designed with metal case, compact and strong. RDS2 ATS, the control part is with metal cover, switch part with DMC case, have strong dielectric performance, protection performance and reliable operation safety. The switch suitable for auto transfer between main power and backup power system or two load equipment's auto transfer and safe isolation etc. The switch has beautiful appearance, novelty, small size, complete functions, is the best choose among the similar products. RDS2 series product have passed the EMC test.
63A Solar Panel Load Auto Changeover Switch ATS RDQ3NX-A/B/C/D series ATS is our company introduced to the market on 2009, effectively solved the problems of MCB type ATS 's insufficient functions, poor reliability, un-convenient replacement etc., this product have three patent certificates ( Invention patent, Utility models patent, Appearance patent), C/D series is a new type introduced to market on 2010, this product have complete functions, concept innovation, is a unique product among the similar products. Product Structure RDQ3-63-A/B/C/D series ATS comprised with two MCB and accessories, mechanical interlock system, intelligent controller etc. Product have A, B,C,D four type control construction, A type is basic type ( Only provide with auto change auto recovery, phase missing protect, auto/manual control), B type is intelligent type( including the A type functions and have Generator start, fire linkage, time delay functions), C and D type is improved type, increased three phase voltage monitoring function on A and B type. This ATS series circuit breaker keeps the original breaker's overload and short circuit protection function. RDQ3NX Series Advantages: 1. Product with modularized design, executive unit, transmission mechanism, control circuit completely independent, easy for replacement. 2. Mechanical transmission device adopt gear transmission, completely eliminate the possibility of closing at same time; 3. Compact appearance, it is one of the smallest product on the market; 4. The control circuit layout adopt working power and sampling power separate with single chip control, to overcome the electromagnetic interference from the hardware construction; 5. Working power voltage range: AC200-400V; 6. Less power consumption, max. peak power loss 4.8W, only 20% of other similar products; 7. Product have complete functions, with generator start, fire linkage, ON delay functions etc.; 8. Modularized design, good components interchange performance, easy installation; 9. Can use various executive circuit breaker;
63A Solar Panel Load Auto Changeover Switch ATS RDQ3NX-A/B/C/D series ATS is our company introduced to the market on 2009, effectively solved the problems of MCB type ATS 's insufficient functions, poor reliability, un-convenient replacement etc., this product have three patent certificates ( Invention patent, Utility models patent, Appearance patent), C/D series is a new type introduced to market on 2010, this product have complete functions, concept innovation, is a unique product among the similar products. Product Structure RDQ3-63-A/B/C/D series ATS comprised with two MCB and accessories, mechanical interlock system, intelligent controller etc. Product have A, B,C,D four type control construction, A type is basic type ( Only provide with auto change auto recovery, phase missing protect, auto/manual control), B type is intelligent type( including the A type functions and have Generator start, fire linkage, time delay functions), C and D type is improved type, increased three phase voltage monitoring function on A and B type. This ATS series circuit breaker keeps the original breaker's overload and short circuit protection function. RDQ3NX Series Advantages: 1. Product with modularized design, executive unit, transmission mechanism, control circuit completely independent, easy for replacement. 2. Mechanical transmission device adopt gear transmission, completely eliminate the possibility of closing at same time; 3. Compact appearance, it is one of the smallest product on the market; 4. The control circuit layout adopt working power and sampling power separate with single chip control, to overcome the electromagnetic interference from the hardware construction; 5. Working power voltage range: AC200-400V; 6. Less power consumption, max. peak power loss 4.8W, only 20% of other similar products; 7. Product have complete functions, with generator start, fire linkage, ON delay functions etc.; 8. Modularized design, good components interchange performance, easy installation; 9. Can use various executive circuit breaker;
Radin Electric  provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. Technical Specification Model RDQ3-63 Working Voltage AC150-265V  50/60Hz Operation Mode Auto and Manual Transfer Mode Auto Transfer with Auto Recovery Transfer time delay 0.2s Fixed / 0~30s adjustable Rated Current 6A to 63A  3P and 4P About ATS RDQ3-63 is CB type dual power transfer switch,mainly apply to the two power systems with neutral line earthed and rated current below 63A, rated voltage 230V,50/60Hz, transfer between two power source when one power source fault,to ensure the power supply reliable and safety. Product Structure RDQ3-63 Series ATS usage category AC-33IB,electrical appliance grade CB class,its structure comprise with two MCB and accessories,mechanical interlock transmission mechanism,automatic controller,motor operation mechanism etc.Meanwhile the MCB inside the ATS have its original over load and short circuit protection function,can also used as ON/OFF and protection of the main circuit. Delivery Terms Shipment & Express & Air express
PC Type Load Auto Transfer Switch for Generators It adopted double complex contact/ horizontal pulling mechanism/micro motor energy pre storage and micro-computer control technology, basically come to Zero arc ( no arcing chamber); Adopted reliable mechanical interlock and electric interlock, executive unit adopt independent load disconnect switch, it makes more reliable and safety; Adopt "Zero Position" technology, it can force to set to Zero Position under emergency situation ( cutoff two way power supply, meet the fire linkage requirements; Load disconnect switch change over adopt singleness motor drive, switch over smooth and reliable, no noise, little impact; The driving motor have instant current across only under the load disconnect switch change over, stable working status no need to provide the working current, outstanding energy saving. Executive load disconnect switch have mechanical interlock, make sure the Normal power and Reserve Power working reliable and no interference; Distinct ON and OFF position indicator, padlock function etc., make reliable and safe isolation between power supply and loading. High security, high automatization, high reliability, working life more than 8000 times; Electromechanical integration design, accuracy change over, flexible, smoothly, adopt international advanced logical control technology, high anti-interference ability, no interference outward. Have main power ON, backup power OFF; main power OFF, backup power ON; main and backup power OFF; three working mode (I-o-II); Easy installation, control circuit adopt plug type terminal connection Four operating functions: Emergency manual, motor remote control, emergency OFF under auto control status, auto control operation. Basic Type Switch Control Characteristic Suitable for two way main and backup power system, auto transfer with auto recovery; Can expand functions by outer connection; Auto, Remote, Manual control functions; Delay 0.5s signal detect, avoid miss actuation; Under Auto control status have "O" position remote control; Can with RS-485 communication port ( optional), according to customer required.
Generator Load Transfer Switch ATS for Diesel Generators Radin Electric provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. RDQ3NM Series Advantages: 1. There is a reliable mechanical interlock device and electric interlock protection between two MCCB, completely avoid the possibility of two MCCB closed at same time; 2. Intelligentized controller adopt the single chip microcomputer (SCM) as the control core, simple hardware, strong functions, easy extension, high reliability; 3. Intelligent controller circuit layout design adopt power sampling separate with SCM control, from the hardware to overcome the electromagnetic interference; 4. With short circuit, over load protection functions, over-volt & under-volt,phase missing auto transfer function and intelligent alarm function; 5. Auto transfer data by external setting freely, with operation motor protect function; 6. Signal connecting cable have passed FLUKE instrument channel test, anti near crosstalk,attenuation crosstalk and back wave loss, can meet the test criteria for permanent link; 7. The ATS controller installation method provide customer with highly autonomy, ( split installation only need simply connect the attached RJ45 signal cable to the corresponding terminal port);
200A MCCB Automatic Transfer Switch Radin Electric provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. Technical Specification Model RDQ3CM Working Voltage AC400V 50/60Hz Operation Mode Auto and Manual Transfer Mode Auto Transfer with Auto Recovery Auto Transfer without Auto Recovery Grid·Generator Rated Current 100A to 1250A Poles 3P and 4P Color White / Black Controller A / B Type as per customer RDQ3CM series intelligent dual power auto transfer switch (brief as ATS) suitable for emergency power supply system with rated AC voltage 400V, 50/60Hz. When one power source fault, can auto interchange from main power to backup power, no need manual operation, to protect the power supply stability. Mainly apply to the important place which not allow power cutoff such as Hospital, shopping mall, bank, chemical industry, metallurgy, high building, military facilities and fire-fighting etc. Product Structure RDQ3CM series intelligent ATS comprised with two 3P or 4P MCCB and its accessories (Aux. contact,Alarm contact), Mechanical interlocking transmission mechanism, intelligent controller etc. Have two constructions of integral and split type. Integral type is controller and executive unit installed at a same base; Split type is controller installed on the panel and the executive unit installed on the base inside the panel box, a 2m length signal cable connecting the controller with the executive unit.
Load Change Over Switch ATS Power Switch for Generators Radin Electric provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. RDS2 series Auto changeover switch mainly used for distribution or electromotor network under 50Hz, rated voltage 380V, rated DC voltage 220V, and rated current 16A to 3200A, change over between main power and backup power, mutual work as backup power system and city power and Generator power. At the same time, it can act as disconnector for the un-frequency ON and OFF circuit or lines. Such product are widely used in the power transmission and distribution system and atomization system of important site which power off is not allowed, such as fire-fighting, hospital, bank, high buildings etc. RDS2 Auto Transfer Switch Equipment (ATSE), is integrate the switch and logical control together, no need extra controller, is an electromechanical integration auto transfer switch, with voltage monitoring, frequency monitoring, communication port, electrical and mechanical interlock functions etc., can achieve auto control, remote motor control and emergency manual control. Operation is achieve by logical control board with various logical commands to managing the motor, gear-box running, motor with spring energy storage, instant release accelerating mechanism, quickly open and close the circuit or make quick transferring, through visible status to make sure the safety isolation, greatly improved the every electrical and mechanical performance. RDS2 ATS integral designed with metal case, compact and strong. RDS2 ATS, the control part is with metal cover, switch part with DMC case, have strong dielectric performance, protection performance and reliable operation safety. The switch suitable for auto transfer between main power and backup power system or two load equipment's auto transfer and safe isolation etc. The switch has beautiful appearance, novelty, small size, complete functions, is the best choose among the similar products. RDS2 series product have passed the EMC test.
TM630A 30Amp Mini Digital Programmable Timer can be operated in 4 separate power supplies, ranges from 240Vac to 12Vdc. This Digital timer is accurate to the minute, designed with either 8 or 16 ON/OFF(event) per day. The digital timer switch is within rechargeable battery, in 1.2V/40Ma, to save the programs for power failiure. it has the features of low consumption, high-accuracy CMOS chip, strongly anti-jamming, simple and easy to set, confirms to IEC 60367 and CE certificated. Application The 7 days 24hours Mini Digital Programmable Timer can automatically switch on and switch off various kinds of electric equipment at a preset time. It is widely used in 7 days programmable control of streetligh, neon light, water pump, fan control, agriculture facilities , broadcasting equipment, heating and refrigerating systems, boiler, overns, dryers, defrosting equipments,swimming pools, hatcheries, light timer, also Ozone and gate operator etc. Feature â?¢ 7 Days / 24 Hours programmaing timer â?¢ 8 ON/OFF programs per day, 15 combinations to a week â?¢ One channel, voltage-free â?¢ Accurate to the minute control â?¢ Low power consumption for 1.2V chips â?¢ Easy to read LCD display, LED indicators â?¢ Reset function and manual override â?¢ Build-in Battery, can retain programmed fuctions about 3 months for power failure Also, it provides 15-combinations of Daily-Programs which can leads great convenience to users upon choosing desired DAYS of WEEK. Description as below: Model description TM630A-1 120Vac main supply TM630A-2 240Vac main supply TM630A-3 24Vac/Vdc(option) TM630A-4 12Vdc mail supply TM630A 30A Mini Digital Programmable Timer Wiring
1X1T Mechanical Fiber Optic Switch 1x1T optical switch(OSW) features low insertion loss, low driving power, small size, and high switching speed. The switch is designed for use in optical fiber communication networks and measurement instruments. The switch consists of two ports that selectively transmits redirects, or blocks optical power in a fiber optic transmission line. The optical switch must be actuated to select or change between two states. 1X1/1x2T optical switch reverts to a default state upon loss of driving power or control signal. 1x1 optical switch Features: High Extinction Ratio Low Insertion Loss High Channel Isolation Highly Stable and Reliable Epoxy-Free Optical Path 1x1 optical switch Applications� Optical Signal Routing Network Test Systems Instrumentation Performance Specifications� Parameter 1x1 optical switch Specification Operating Wavelength (nm) 850 �1310�1490�1550�1625 Insertion Loss (dB) < 0.6 WDL (dB) < 0.15 PDL(dB) 55 Switching Speed (ms) < 10 (typ.5) Drive Voltage (V) 3 or 5 Power Handling (mW) 500 Durability (cycles) 10 million Operating Temperature (°C) -20 ~ +80 Storage Temperature (°C) -40 ~ +85 Dimensions (LxWxH) (mm) 27x12.6x8.5
The 8X8 all-optical network switch module is a compact, high-performance and ultra-low power fully non-blocking all-optical 8 port â??any-to-anyâ?� matrix switch module. This unique customer configurable single-sided switch design allows any of the 8 ports to be connected to any other ports enabling new interconnection architectures not possible with traditional symmetric NxN switch matrixes. The ultracompact size and low-power usage make this an ideal choice for OEM applications and enables the switch to be mounted onto pluggable circuit packs. It is designed to meet the highest performance and reliability needs of the most demanding applications with exceptionally low optical loss, compact size, low power requirements and fast switching speeds. â??8x8 optical switch Features ï�¬Low Insertion Loss ï�¬Wide Wavelength Range ï�¬Low Crosstalk ï�¬High Stability, High Reliability ï�¬Epoxy-free on Optical Path ï�¬Latching and Non-latching â?? 8x8 optical switch Application ï�¬Metropolitan Area Network ï�¬R&D in Laboratory ï�¬System Monitoring ï�¬Configurable OADM â?? 8x8 optical switch Performance ParametersOSW-8Ã?8 Wavelength Rangenm650ï½?13101260ï½?1670 Testing Wavelengthnm650/780/850/980/1064/13101310/1490/1550/1625/1650 Insertion LossdBTyp:2.0,Max:2.8Typ:2.0 ,Max:2.5 Return LossdBâ?¥30â?¥50 CrosstalkdBâ?¥35â?¥55 PDLdBâ?¤0.05 WDLdBâ?¤0.25 TDLdBâ?¤0.25 RepeatabilitydBâ?¤Â±0.02 Power supplyv3.0 or 5.0 TypeLatchingor Non-Latching LifetimeCycleâ?¥107 Switch Timemsâ?¤15 Transmission PowermWâ?¤500 Operation Temperatureâ??-20ï½?+85 Storage Temperatureâ??-40ï½?+85 Dimensionmm(L)184Ã?(W)184Ã?(H)38
The MM Series VOA is based on a proprietary micro-electro-mechanical mechanism featuring compact design, simple construction, easy direct drive, and excellent optical performance. The MM series VOA is compliant with the Telcordia 1209 and 1221 reliability standards. The MM series VOA is available in either normally-open or normally-closed configurations and with an integrated tap option. The VOA is driven by applying an electrical voltage. â??VOA MEMS optical switch Features â?¢ Compact â?¢ Low Cost â?¢ High Reliability â?¢ Low IL, PDL, WDL & TDL â?¢ Low Power Consumption â??VOA MEMS optical switch Application â?¢ Power Control â?¢ Power Regulate â?¢ Channel Balance â?¢ Instrumentation â??VOA MEMS optical switch Performance MM VOA Unit Typical Wavelength nm 1310±50 / 1480±50 / 1550±50 Insertion Loss1 dB 0.8 Attenuation Range 30 Polarization Dependent Loss @10dB 0.15 @20dB 0.25 Wavelength Dependent Loss @10dB 0.20 @20dB 0.40 Temperature Dependent Loss @10dB 0.40 @20dB 0.80 Polarization Mode Dispersion ps 0.05 Return Loss 45 Response Time ms 5 Device Resistance ohm 100 Power Consumption3 mw 130 Optical Power Handling mw 500 Operating Temperature â?? -5~75 Storage Temperature â?? -40~85 Package Dimension mm See drawing below
The MEMS Latch Series 1x4 Fiber optic switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patent pending MEMS configuration and activated via an electrical control signal. It uniquely features rugged thermal activated micro-mirror movements instead of rotation, and latches to preserve the selected optical path after the drive signal has been removed. This novel design significantly reduces packaging requirement, and simplifies driving electronics, offering unprecedented high stability as well as an unmatched low cost. 1x4 MEMS optical switch Features â?¢High Reliability â?¢Latching â?¢Intrinsic tolerance to ESD 1x4 MEMS optical switch Applications â?¢ Channel Blocking â?¢ System Monitoring â?¢ Instrumentation â?? 1x4 MEMS optical switch Performance ParametersMSW-1Ã?4 Wavelength Rangenm1260ï½?1620 Testing Wavelengthnm1310/1490/1550/1625/1650 Insertion LossdBTyp:0.7 ,Max:1.2 Return LossdBâ?¥50 CrosstalkdBâ?¥50 PDLdBâ?¤0.10 WDLdBâ?¤0.25 TDLdBâ?¤0.20 RepeatabilitydBâ?¤Â±0.05 Repeatability RateHz20 LifetimeCycleâ?¥109 Switch Timemsâ?¤5 Transmission PowermWâ?¤500 Operation Temperatureâ??-5ï½?+70 Storage Temperatureâ??-40ï½?+85 Switching typeLatching Dimensionmm(L)26Ã?(W)22Ã?(H)9.4(±0.2)
