Description Aluminum tile, also called corrugated aluminum, is one of the most popular construction material.To a certain extent it could replace stainless steel because its property of lightness and anti-corrosion. Specification: MaterialAlloy aluminum TypeSeries 1 series 9 TemperAll temper Thickness0.1mm 2.0mm Surface treatmentSpray coating/roll coating ColorNaturall/gold¡ Characteristic & advantages Very light and easy to assemble Inexpensive and cost saving Good property of antirust Good effect of heat insulation & sound insulation Moist-proof, fire-proof & dust proof Usage: The roof and wall of workshop or warehouse Temporary house, simply building, dormitory Cleansing house & office Packing Protective film, wood pallet, standard export pacakage Protective film, wood pallet, standard export pacakage
- produced by advanced technology and equipment using high-purity gypsum as the raw material, auko regular gypsum board bears flat surface, accurate dimensions and assured quality. - the imported high-quality covering paper has high strength and good adhesive property with plaster core, thus guaranteeing the strength of plasterboard and laying a firm foundation for applying plaster putty or direct decoration. - light weight and high strength, strong nail-pull resistance, good flatness, low water content, low expansion rate, good durability, favorable processability and easy cutting. - tapered edge offers easiness for jointing and the surface of joint is smooth and not easy to crack. - it can adjust indoor humidity to a certain extent and has passed green building material certification for its healthy and environmental property. Packing in containers
Moisture resistance gypsum board, covered with green paper, is moisture resistant lightweight plasterboard. It can be directly used in indoor environment with a relative humidity of over 95%, such as partition and ceiling in washroom, kitchen, basement, it can also be used as base board for applying ceramic tiles, metal sheets, plastic sheets, etc.(it can also be used as lining board of ceramic tiles, metal sheets, plastic sheets, etc.). Standard carton(can add bubble and hard paper for protect products)
The regular paper-faced gypsum board : Technology parameter Main physical propertiesMain thickness specifications mm Standard requirements (gb/t9775-1999) Fracture load(n)Vertical9.5 360 12.0 500 Lateral9.5 140 12.0 180 Weight per unit area(kg/©o) 9.5 9.5 12.0 12.0 9.5120024007.0 1002882.01 12120024009.0 80230.42.08 9.5120030007.0 1003602.52 12120030009.0 802882.59. Standard carton(can add bubble and hard paper for protect products)
Auko materail factory mainly supply the light steel keel for the ceilings and drywall partition also with the accessories.Our products are featured with light-weight, long lifetime, high durability, rust resistance, easy cut apart, convenience installation, environment friendly, save labor costs and so on.They are popular used in domestic and all over the world for its excellent quality and reasonable price. -feature :1.Good strength2.Gauterization resistant3.Water / fire resistant4.Easy to install -usage :1.The keel used for saspension ceiling2.Widely used in condole suports building decoration materials-remarks:length can be provided by customers'request.
Kinds of gypsum boardRegular gypsum board;fireproof gypsum board; moisture proof gypsum board;sound insulation gypsum board OthersWe manufacture and sell indoor decorative materials including gypsum board, pvc gypsum board, calcium silicate board and light gauge steel Convenient ConstructionThe paper-faced plaster board of auko building material can be constructed easily by nailing , cutting and planing.Now it already becomes the first selection of the gypsum board market. Raw materialNatural high purity gypsum powder, fiber, high quality additive Production capacity6000, 0000square meter/square meters per year CertificationIso9001 sgs Packaging detail:Standard carton(can add bubble and hard paper for protect products) Trade termsFob cfr cif Method of paymentL/c t/t PriceFob$1.8 -$2.5/ per square meter Minimum order1x20ft full container PortLianyun harbour The delivery periodWithin 15 days after receipting buyer's t/t deposit or l/c.
Specifications: Products name:paper-faced gypsum board Material :gypsum board Size : Length :1800mm , 2400mm , 2440mm, 2700mm, 3000mm Width:1200mm 1220mm Thickness: 8, 8.5 9 9.5 10 12 13 mm Advantages: Surface smoothness and easy cleaning2.Strong color guarantees 10 years for indoor use3.Flexible suspension system make each ceiling tiles easy install and disconnect4.Easy to match lamps or other ceiling parts 5.Environmentally friendly products( low pollution) 6.High quality, reasonable price and good customer service Recommend applying in these places below: 1.Public buildings:hospitalschoolrestaurantair portbus station and so on 2.Commercial buildings:office, store, plaza, etc.3. Civil using The minimum order: only one container(20¡¯) ! My dear friends , whichever gypsum board you choose, the minimum order is only 1*20¡¯ and different items are welcome! Raw material Natural high purity gypsum powder, fiber, high quality additive Production capacity 6000, 0000square meters per year Certification Iso9001 sgs Packaging detail: Container Trade terms Fob cfr cif Method of payment L/c t/t Minimum order 1x20ft full container
Auko keeps using high technology and high purity gypsum as raw material, keeps using the international advanced production technology and equipment, which ensure the quality of gypsum board.High quality original wood pulp paper surface, high strength, and good adhesive properties of gypsum core is the virtue of our product, and we can ensure the strength of gypsum board.What's more, our products can better to apply decorative gypsum putty or direct provides a good base. Feature: (1)well decorative function: the quality of products has smooth surface, exact size as the high purity gypsum and advanced production technology and equipments , it has a well decoration effect. (2)environmentally friendly products: less pollution than other building materials. (3)multi-function: shock resistance, fireproof , sound insulation, impact resistance. (4)high quality, reasonable price and good customer service. 9.5mm*1200mm*2400mm 7.0kg square meter 12mm*1200mm*2400mm 9.0kg/square meter 9.5mm*1200mm*3000mm 7.0kg/square meter 12mm*3000mm*1200mm 9.0kg/square meter
Lijie exterior wall cladding is consist of 100% exterior phenolic resin compact grade laminate and metal frame structure, which is widely used in the outside building facades and easy to set up, low maintenance cost . Applications: Hotel wall facade, office building, airport, station, school building, public occasion. Features: 1.Resistant to water , moisture, 2.Resistant to fire, heat and cigarette burns, 3.Anti-graffito, anti-bacterial, anti-static 4.No toxic, no deform , no fades 5. Extremely durable, easy to clean, install, maintain 6.Rich in colors and surface finish. Standard wooden pallets & cartons
Our products are as follows: T/S: 1670 /1770 / 1860 / 2000 Mpa Structure£º1x7, Standard: ASTM A416, BS5896, GB/T5224,JIS G3536, AS/NZS 4672 Nominal Dia.: 9.53/9.5, 12.7, 15.2, 15.24, 15.7, 17.8, 18.9, 21.6mm Type: Plain, Spiral Ribs, PE Coated (unbonded), Epoxy Resin Coated. Packing: Shaftless and Moisture-proof. Each coil is strapped by steel bands with two wooden pallet on the bottom (fuming /steaming) and fully wrapped in anti-rust paper&p.p woven sheet.
Our products are as follows: T/s: 1670 /1770 / 1860 / 2000 mpa Structure£º1x7, Standard: astm a416, bs5896, gb/t5224, jis g3536, as/nzs 4672 Nominal dia.: 9.53/9.5, 12.7, 15.2, 15.24, 15.7, 17.8, 18.9, 21.6mm Type: plain, spiral ribs, pe coated (unbonded), epoxy resin coated. Packing: shaftless and moisture-proof. Each coil is strapped by steel bands with two wooden pallet on the bottom (fuming /steaming) and fully wrapped in anti-rust paper&P.P woven sheet .
Our products are as follows: T/S: 1670 /1770 / 1860 / 2000 Mpa Structure£º1x7, Standard: ASTM A416, BS5896, GB/T5224,JIS G3536, AS/NZS 4672 Nominal Dia.: 9.53/9.5, 12.7, 15.2, 15.24, 15.7, 17.8, 18.9, 21.6mm Type: Plain, Spiral Ribs, PE Coated (unbonded), Epoxy Resin Coated. Packing: Shaftless and Moisture-proof. Each coil is strapped by steel bands with two wooden pallet on the bottom (fuming /steaming) and fully wrapped in anti-rust paper&p.p woven sheet .
Standard plaster board Moisture resistant plaster board Water proof plaster board Fire proof plaster board Any size we can do as customers request. By paller , 2pcs/package 2400x1200x13mm/15mm 2700x1200x13mm/15mm 3000x1200x13mm/15mm 3600x1200x13mm/15mm
High alumina brick Al2o3>80% Bulk density>2.67g/cm3 Cold crushing strength>70mpa Common shaped and irregular shaped. Wooden pallets
Magnesia brick is a kind of alkalescency refractory brick that made from the sintered magnesium with its content of 87% and that are combined with silicate. Since its combination composition is mainly cms-m2s system, its load softening temperature is low and thermal shock resistance is poor that determine its application is few. But magnesia brick is widely sued in the furnaces and kilns that have alkaline atmosphere. The essential properties of magnesia brick depends on the nature of the raw materials, the mineral composition, microstructure and closely on the density of the products. In fumigated wooden pallet
High alumina low cement castable Corundum castable refractory Corundum refractory castable Refractory castable manufacturer Corundum castable refractory Corundum refractory castable Refractory castable manufacturer Al2o3: 90% Max service temperature c: 1750 Refractory castable: it is our bestseller. We can supply many kinds of refractory castable, such as low cement castable, self flowing castable, high alumina castable, mullite castable, azs castable, fireclay castable, light weight refractory castable, corundum castable refractory etc. The refractory castable is unshaped refractory material that doesn't need firing and features fluidness after adding water. Mixed by grain, fines, and binder in fixed proportion, refractory castable can replace special shaped refractory material. Refractory castable can be used directly without firing, easy to construct, and has a high utilization rate and high cold crushing strength. The refractory castable is primarily used fro furnaces and kilns in metallurgy, petroleum, chemical industry, construction, electric power and building etc. In plastic sheets and then in woven bags, last in wooden pallet
1.Low thermal conductivity, 2.Good thermal insulation performance. 3.Good integrity with furnace lining Tyical features: High compressive strength in normal temperature, high ability for anti-abrasion during work, low shrinkage degree under high temperature so as to maintaining an integrity of the furnace lining; low apparent porosity, and fe2o3 content to reduce the carbon deposit in the blowhole and avoid the bricks broken in case of expansion; seldom melting point settings shape. Fireclay bricks are divided into different kinds which are mainly as below: (1) normal purpose fireclay bricks (2) fireclay bricks for coke oven (3) fireclay bricks for blast furnace (4) fireclay bricks for hot-blast stove (5) glass furnace bottom fireclay blocks (6) lower porosity fireclay bricks. In plastic sheets or in wooden pallets
Self flowing castable. Self flowing to narrow place. Easy for installation. Al2o3:40%~80%. Iso9001:2000 certificate. Self flowing---great advantage in installation. These self-flowing or pumpable castables may be transported to high elevations. This self-flowing property of a castable is indeed an installation advantage and many manufacturers are adopting their castable product line to be self-flowing. In woven bags and in fumigated wooden pallets
1) two sides: color steel sheet, stainless steel sheet and hot-galvanized steel sheet for customers' option 2) thickness(mm): 0.3-1.0mm 3) color: according to customer requirement, default is milk white. 4) width: 950mm, 1150mm 5) length:according to customer requirement, the max length is 10, 000mm considering transport. 6) finish: galvanized, powder-coated with pe/hdp/pudf, stainless steel with brushed/mirrored 2.Sandwich layer: polyurethane(pu) Density: 38-40(kg/m3), 40-42(kg/m3), 42-45(kg/m3). Thickness(mm): 50, 75, 100, 120, 150, 200. 3.Fireproof:according to customer requirement 4. Fireproof rating: grade b 5. Advantages: advantages: low price, light and durable, easy install, heat insulation, waterproof, used widely. 1) two sides: color steel sheet, stainless steel sheet and hot-galvanized steel sheet for customers' option 2)thickness: 50mm-200mm 3)width: 950mm/1150mm 4) steel thickness: 0.25mm-0.80mm 5) color: as request 6) finish: galvanized, powder-coated with pe/hdp/pudf, stainless steel with brushed/mirrored.
1) two sides: color steel sheet, stainless steel sheet and hot-galvanized steel sheet for customers' option 2) thickness(mm): 0.3-1.0mm 3) color: according to customer requirement, default is milk white. 4) width: 950mm, 1150mm 5) length:according to customer requirement, the max length is 10, 000mm considering transport. 6) finish: galvanized, powder-coated with pe/hdp/pudf, stainless steel with brushed/mirrored. Density: 38-40(kg/m3), 40-42(kg/m3), 42-45(kg/m3). Thickness(mm): 50, 75, 100, 120, 150, 200.
