1.T Post explain
SIMPLE IS MORE-This seemingly simple "T" Design post is of thermal plastic material manufactured in a manner which forms a post that clearly out performs, stronger and the best value of any other comparable post.
A steel fence post, also called (depending on design or country) a T-post, star picket, a Y-post, star post, star dropper or waratah, is a type of fence post or picket. They are made of steel and are sometimes manufactured using durable rail steel. They can be used to support various types of wire or wire mesh. The end view of the post creates an obvious T, Y or other shape. The posts are driven into the ground with a manual or pneumatic post pounder. All along the post, along the spine, there are studs or nubs that prevent the barbed wire or mesh from sliding up or down the post.
2, Product Standard:
1.MATERIAL: low carbon steel
2.LENGTH: 4'---10'
3. Thickness: 1.3mm, 1.5mm, 2.0mm
4.WEIGHT: 0.95lb/feet 1.25lb/feet 1.33lb/feet
5.SURFACE TREATMENT: Green painted ,Red painted
6.TYPE: with plate ,without plate;withclip ,without clip
1.Materials: low carbon steel, medium carbon steel and other materials.
2.Features: support of strong, good stability.
3.Use: the product adopts the new technology,which is mainly used for building and infrastructure engineering Foundation, underground works or bridge, and other large bearing parts of reinforced fastening, large building industry-layer or multi-layer steel connection between.
4.other Name:
Bar support also known as the erection of Stoll, metal pad, stool, metal horse stool,reinforcing steel bar stool.
2.full products information
1).SB--Slab Bolster dipped
Typical Sizes ( Height ) : 1/2"; 3/4"; 1"; 1-1/2"; 1-3/4"; 2";
Length: 5' and 10' are available.
Surface treatment: plain and Epoxy coated. Special request also ok.
For 5' length there are 12 legs.
Other specifications are available as buyer's requirement.
2).SB--Slab Bolster tipped
Typical Sizes ( Height ) : 1/2"; 3/4"; 1"; 1-1/2"; 1-3/4"; 2";
Length: 5' and 10' are available.
Surface treatment: plain and Epoxy coated. Special request also ok.
For 5' length there are 12 legs.
Other specifications are available as buyer's requirement.
3).SBU--Slab Bolster Upper
Typical Sizes ( Height ) : 1/2"; 3/4"; 1"; 1-1/2"; 1-3/4"; 2";
Length: 5' and 10' are available.
Surface treatment: plain and Epoxy coated. Special request also ok.
For 5' length there are 12 legs.
Other specifications are available as buyer's requirement.
4). BB--Beam Bolster:
Typical Sizes ( Height ) : 1/2"; 3/4"; 1"; 1-1/2"; 2";
Length: 5' and 10' are available.
Surface treatment: plain and Epoxy coated. Special request also ok.
For 5' length there are 24 legs.
Other specifications are available as buyer's requirement.
5). BBU--Beam Bolster Upper:
Typical Sizes ( Height ) : 1/2"; 3/4"; 1"; 1-1/2"; 2";
Length: 5' and 10' are available.
Surface treatment: plain and Epoxy coated.
Other specifications are available as buyer's requirement.
6). CHC--Continous High Chair Dipped:
Typical Sizes ( Height ): 2"; 3"; 4"; 5"; 6"; 7"; 8"; 9".
Length: 5' and 10' are available.
Surface treatment: plain and Epoxy coated. Special request also ok.
For 5' length there are 8 legs.
Other specifications are available as buyer's requirement.
7). CHCU--Continous High Chair Upper:
Typical Sizes ( Height ) : 2"; 3"; 4"; 5"; 6"; 7"; 8"; 9".
Surface treatment: plain and Epoxy coated.
For 5' length there are 8 legs.
Other specifications are available as buyer's requirement
Feature of ground screw foundation ground mounting
1.easy and quick installation with piling machine
2.professional customized design
3.10 years quality warranty and 25 years design life
4.suitable for various kinds of ground condition and no destroy to soil
5.cost effective with around 5m span between support mounts
Professional advantage
More than 10 years’ professional producing experience.
Price advantage
We are manufacturer and we have our own factory, you can get a competitive price with high quality.
Service advantage
Your inquiry will get quickest and most efficient response. We can provide samples for your evaluation as well as fastest delivery.
Honor advantage
Good reputation in this industry due to our high quality products and service.
1.All sizes are customized according to the requirement of the guest
2.Painted or Hot Dipped Galvanized.
3.Beautiful and elegant
4.Process:Stamping and welding and hot dip galvanized(painted)
125375 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
1.Type:Ball Post Cap
2. Material:Copper or stainless steel or iron
3.Thickness:0.8mm,1.2mm
4. Size: 71mm,91mm,101mm,121mm
5.Surface treatment:Hot Dip Galvanized,PVC Coated
6.Used for iron fence post caps, wood fence decoration post post.
1.All sizes are customized according to the requirement of the guest
2.Painted or Hot Dipped Galvanized.
3.Beautiful and elegant
4.Process:Stamping and welding and hot dip galvanized(painted)
1.Type:Mushroom Rebar cap/Plastic rebar cap
2. Raw material: plastic
3. it is used for rebar,and avoid the rain,water and others.
4. different size and color according to customer's need.
5. the method is injection molding.
6. Size: used for 9-16mm,20-25m,28-32mm bar steel
Specifications
mgo board
fireproof wall board
green and environment board
Features:.Fireproof,Damproof,Heat insulation,co
Specifications
HS Code:6808000000
Material :mgo,mgcl2,sawdust,perlite,non-woven cloth
Standard size:1220*2440mm 1220*3660mm
Description:
1) Fireproof:Resistant to combustion at 800 degree and remains flameless at 1200 degree
2) Waterproof:Resistance to deformation in wet environments
3) Weight:Light weight, (volume weight:0.96g/cm3)
4) Strength:Bendable and impact resistant
5) Sound insulation:Sound loss through a 6mm thick tolar tm plate-29dB
6) Heat resistance:Thermal conductivity of 0.216w/mk
7) Durability:Resistant to halogen accumulation, long lasting strength
8) Cold resistance:Can be used at -40 degree
9) Installation:Easy to cut, saw, nail, stick, paint and veneer
10) Environmental friendly:Free of asbestos, formaldehyde and ammonia
MGO fireproof sheet is a kind of environmental-friendly fireproof board widely used in construction and decoration. It's made from magnesium oxide, magnesium chloride, fiberglass mesh, sawdust, perlite etc. We use, highly-purified active MGO as the main fireproof material of board, high-quality MgCl2 as the main cementing material to solidify other materials, alkali-resistance fiberglass mesh to ensure the high strength of board, soft sawdust and light non-combustible perlite as filling materials.
Magnesium Fireproof Board was tested by the National Center for Quality Supervision and Testing of Fire Building Materials (NFTC). Its fireproof level is rated level A (nonflammable level)
2.Damproof
Magnesium Fireproof Board is excellent in moisture-resistance. Dry bending strength is 15Mpa. Bending strength under absorbed moisture is 22Mpa.
3.Heat insulation
Magnesium Fireproof Board has heat prevention material incorporated, it has great feature of heat prevention. Thermal resistance is 1.14m2k/w.
4.soundproof
Magnesium Fireproof Board is proved to have good noise insulation property after inspected by the National Center for Quality Supervision and Testing of Fire Building Materials (NFTC), The noise insulation factor of the wall can reach 44dB and 47dB. It has the best noise insulation constitution in China, especially the 95mm wall comprised by the 10mm board.It is light, t can save time, space, weight and expense. It is a new and high efficient wall.
5.compact resistance
Magnesium Fireproof Board is a light board. Its density is less than 1.0¡Á1.03kg/m3. At the same time its bending strength and impact resistance is excellent. Also, it will maintain its' quality during construction.
Mgo board (usually called magnesium fireproof board) is the building material widely used in the construction area. The stable magnesium colloid is reinforced by middle alkali glass fiber net and stuffed by light material then becomes new frameless decorative material
Features:
Fireproof and waterproof
Incombustible: A grade, GB8624
density of the fiberglass mesh 4x4mm, 6x6mm,
without fly ash in our boards
without non-alkaline fiberglass
Applications: partition wall of office room, shopping mall, theater, ceiling, etc.
Pcking: wooden pallet or in bulk
Production Capacity and quality:
10000pcs/day; 300000pcs/month
With high quality of A Grade
Competitive price
1. With density about 0.9 g/cm3-1.0 g/cm3.
2. Flexible and easy to make proper sculpt and designs.
Fiber cement board is made from high-quality fiber and mineral substances with advanced technology and process ,which hace undergone high temperature and high pressure maintenance,and special treatment.
Specifications
-2440*1220*4-20mm
-2400*1200*4-20mm
-3050*1220*5-18mm
-Other optional specifications available
upon request
-Optional surface sanding and finishing
treatment
Main characteristics
-Excellent fire-proof performance
-Excellent moisture-proof performance
-Good durability and long service life
-High strength
-Stable dimensions
-Good heat and sound insulation
Fireproofinfg characteristic:A grade non combustible(GB8624)
Density:0.9-1.1g/cm3(GB/T7019-1997)
Intensity of bending resistance when dry :18Mpa(GB/T7019-1997)
Intensity of bending resistance when moisture-saturated condition:22Mpa(GB/T7019-1997)
The rate of deformation when pick up the moisture:0.26%(GA160-1997)
The shrinking rate when heated:1.0%(GA160-1997)
Water permeability:there is no drop of water to emerge in the back(CNS13778)
Impact resistance:No crack,strip and run through(CNS13778)
Thermal resistance:1.14m2k/w(GB/T 13475-92)
Sound insulation:44db(GBJ121-88)
Color:white or grey
Security:100% does not include the asbestos,formaldehyde,and benzene
Radioactivity;Not limited by the scope of application(GB6566-2001)
Our Absolute advantages:
Grade A non combustible(GB8624)
fireproof,waterproof,soundproof green mgo board
friendly mgo board
Green dampproof board is designed for replacing fiber cement board,because of similar color-grey color.
However be compared with fiber cement board, dampproof board is fireproof A grade,dampproof,we do the test,dampproof board could be remained orginal after put into the water for one month.
It is easy to cut ,to install. Most important is that dampproof mgo board is low cost building material for projects, will make huge profit for you.
Dampproof board is a new dampproof material,this kind of product has the high performance of dampproof, and it is tested that it could be remained original after put into the water for one month, it will be not distortion, and there is the performance environment protection, damp resistance, high intensity, low weight, sound insulation, keep warm. It could be used in the space of damp like cookroom, bathroom and the inner of exterior wall. The surface of this kind of product could be pasted tile, wall paper, paint and so on. It is used Gray to distinguish the other board.
Good performance:
1) Fireproof: Grade A.
2) Keep warm, insulate against heat, the sound insulation.
3) Moisture resistant.
4) Construction simple, easy and swift, easy to decorate, easy to cut, bore, plane, shear, good surface finish, applicable to other modeling to decorate for twice/
5) 100% does not include the asbestos, scientific prescription, really green environmental protection panel.
6) Durable have long performance life. Widely used in commercial building, industrial building, residential housing, public place and so on.
125375 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
