An expansion joint or movement joint is an assembly designed to hold parts together while safely absorbing temperature-induced expansion and contraction of building materials, and vibration, or to allow movement due to ground settlement or seismic activity
We have stock lot materials available at our UAE warehouse, it is now ready for sale in terms of full lot that is 500 MT which is included Channel, Girders, I-Beam, Conduite Pipe, Chequered & Plane Plate, Square Pipe etc.
A calcium silicate insulation board is a non-asbestos insulation product that can withstand continuous working temperatures from 650 to 1100 . It is lightweight, has low thermal conductivity, high strength, is easy to install, reliable and durable. Available in 2 grades, 650 and 1000 and 1100, they are commonly used as a backup insulation for furnaces in the steel, petrochemical, ceramic, cement and glass industries or for fire protection in building construction. It not only saves energy but also increases productivity and provides protection for personnel in industrial safety. In housing construction, calcium silicate insulation board is also used as a fireproof insulation material for ceilings and walls and as a decorative sound-absorbing material.
Properties of calcium silicate insulation board
Thermal shock resistance and stability
Consistently low thermal conductivity
High structural strength at high temperatures
Non-combustible
Electrical insulation properties when dry
Easy to process
Insoluble in water, non-corrosive
Applications
The calcium silicate insulation board is easy to install and handle, and its low thermal conductivity makes it ideal for insulation. It is non-toxic and asbestos-free.
The calcium silicate insulation board is widely used in urban heat networks, metallurgy, electronics, machinery, steel, petrochemicals, ferrous and non-ferrous metal casting, aluminum, ceramics, glass and other industries.
Advantages of calcium silicate insulation board.
Asbestos-free
Product Description
Single Axis Foot Description
Constructed from strong, lightweight composite materials and an advanced design, it provides state-of-the-art single-axle feet. 10% to 20% lighter than traditional single-axle feet, this low-mobility model features neutral, realistic, waterproof makeup and interchangeable front and rear bumpers with three durometers. Supplied with moulded titanium pyramids.
The unique design feature of the single axis foot is a single articulating joint set at or slightly below ankle height.
The joint allows the toes to be raised (dorsiflexion) and lowered (plantarflexion) relative to the tibia. The amount of movement is determined by a rubber cushion within the ankle unit.
The cushion absorbs shock and cushions the user as he transfers weight from heel touch to toe off.
Overview
1. Item no : 1H40
2. Material : Polyurethane
3. Color : beige
4. Weight : 140-500g
5. Heel height : 10+/-5mm
6. No. range : 21-28cm
7. Weight up to : 100-125kg
8. Quality : have past the one million times bent no break test.
9. We can do the custom service as your sample
125475 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
1. Excellent adhesion - prevents falling of tiles
2. Low shrinkage - prevents cracking of tiles and joints
3. Needs no water curing - saves labour and time
The casing cement-head with double plugs (called as cement-head ) is a common cementing tool used as wellhead unit in all kinds of cementing operation. Comparing to cement-head with single plug, it owns longer cement-head body , and upper rubber plug and lower rubber plug can be put in at same time.
The tool owns some advantages such as simple construction, easy operation, high pressure resistant, manifold in common use, flexible in connecting. Especially, the lever type indicator can shows whether rubber plug goes through double plugs cement-head to enter casing so that operator can determine easily.
The new anti - crusting lining board of our company has the characteristics of simple installation and high reliability. It can replace the formwork, and no demoulding is needed after pouring. Directly put into use, shorten the construction period, improve the construction efficiency.
Applicable PARTS: kiln tail smoke chamber, rising flue, cutting cone and cutting pipe and other parts that are difficult to repair with skin and wear, and can also be used for cutting slope and other parts.
Typical Application
1.Cement industry
kiln back lining thermal insulation
2.Ceramic industry
lining of various kilns for thermal insulation, Kiln door, kiln car and dilatation joint, etc,.
3.Petrochemical and metallurgy industries
Heat treatment furnace kiln back lining thermal insulation, mechanic and metallurgy heating furnace, thermal treatment furnace and others industrial furnace and hot face internal lining
4.Glass industry
Glass kiln lining and back lining thermal insulation
5.Aluminium industry
reduction cell firebricks back linings, high temperature reaction, heating device-wall lining and back linings
6.Back-up insulation to brick & castable
7.high temperature electrical equipment thermal insulation
The calcium silicate board is 100% non -asbestos, fire resistant, insulation, Can be used in furnace, kiln, oven's insulation project in many industry areas. common size: 600*300, 1000*500, working temperature 650C and 1050C, thickness: 25-140mm.
PCE is a polycarboxylate based high range water-reducing admixture which enables concrete to be produced with very low water to cement ratios. Polycarboxylate superplasticizer is compatible with air-entraining agents, microsilica, accelerators and many other admixtures; however,each material should be added to the concrete separately.
Thickness 6 mm
Usage/Application Partition
Size 8-4 sq ft
Material Cement, Fibre
Attaching Type Screwed
Fiber cement boards are composite materials made of sand, cement and cellulose fibers. More specifically, they are composed of Portland cement with glass-fiber mesh on the surface. These boards can be used independently or along with plywood.
Upvc square Rain Gutter system
Colors : White,Grey,red & others (based on order)
Size : 6 inch
Thickness: 3mm
Standard length:- 5m ,other custom sizes
Number of pieces in a bundle : 6
Total length in metres/bundle : 30metres(5mx6pc)
Water holding capacity (5m long) : 75litres
Material : UPVC
Accessories : yes..Extra
Smart e-care is a combination of polymer, silicones and inert chemical powder
materials for exterior wall coat to protect the surface from Heat, Water and Acid Rain. It is a caring skin for any building.
Blister plaster is made of adhesive hydrocolloid and high-permeability PU film, without any medicinal ingredient.
Available in different shapes and sizes to provide comprehensive protection.
The semi-permeable PU film make it breathable and waterproofSoft ,elastic and comfortable ,stick quite well l on skin ,not easily to fall,like the second layer skin
Highly absorbent,it can absorb lots of exduate and reduce maceration to the skin,accelerate wound healing
True Aegis wall putty is a polymer putty which smoothen the wall by filling the
micro pores and cracks of wall. It decreases the consumption of paint on walls. It gives rich
finish and homogenous gloss on walls. Polymer which are added in it gives high bonding strength to wall and paint.
Konk Plast is ad-mixture which gives dual property to cement concretes.
Konk Plast act as a super plasticizers along with it gives partial crystalline water proofing to all types of concretes.
Smart Morta Care is a chemical admixture which is added to concrete
mixtures to improve work ability and strength by helping the cement to react and cure
completely. Unless the mixture is â??starvedâ?? of water, the strength of concrete is inversely
proportional to the amount of water added or water-cement (w/c) ratio. In order to produce
stronger concrete, less water is to be added, which makes the concrete mixture less workable and difficult to mix, necessitating the use of Smart Morta Care for good work ability.
Cement Concrete Polymer Mix Plus, long life and
maintainance free additive for new plaster, crack repair additive, anti-shrinkage,
high bonding (anti-erosion). Used for Prevention of Seepage and Salinity
High adhesion to old concrete & cement surfaces.
A multi purpose polymer for water proofing,
cladding mortar.
Water proofing base coat for sunken areas.
Water proof.
Acid resistant.
Salt resistant coating.
125475 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
