Small body, light weight, small turning radius, multi-usage, widely used in farms, pasture, foreign family and factories: handling, material cleaning, loading and unloading, drilling, pushing the snow, the broken.
Adopt imported engine, strong power, power output, optional honda, b&s, kohler three types of engines.
Double ways of output, mechanical operation, also can choose hydraulic servo handle.
With standard person handwriting do engineering births, also can choose solid tyres, grassland sets, narrow births, can also be supplied with caterpillar vehicles.
In-situ 360 degree sliding steering, small in turning radius, drive steady.
Can be fully open cover, simple quick change device, open buyers and realize the change after machine.
Drive system used high strength chain, long life, easy maintenance, easy to adjust and maintenance, which can guarantee the chain transmission efficiency and longer from practical life. Services are secure, tracking service.
Engines: perkins engines impoted, and with perkins engine manufacturers to form partnerships for many years, ensure that the mechines capable of performing various work environments.
Form: manufacture, pleasing in apperance, durability, hydraulic tank, fuel tank and chassis integration, in the structure to fully maximize the performance of the machine, arm and body to work the perfect combination.Operation system: the operating system can choose the advanced mechanical manipulation of clear structure and easy maintenance. Pilot control lever controls the various types of instrument parameters, can greatly improve operator comfort.
Leveling system: adopts imported machinery or hydraulic leveling system;leveling system, not only to improve to become more effective, but also increased the use of safety coefficient.
Engines: perkins engines impoted, and with perkins engine manufacturers to form partnerships for many years, ensure that the mechines capable of performing various work environments.
Form: manufacture, pleasing in apperance, durability, hydraulic tank, fuel tank and chassis integration, in the structure to fully maximize the performance of the machine, arm and body to work the perfect combination.Operation system: the operating system can choose the advanced mechanical manipulation of clear structure and easy maintenance. Pilot control lever controls the various types of instrument parameters, can greatly improve operator comfort.
Leveling system: adopts imported machinery or hydraulic leveling system;leveling system, not only to improve to become more effective, but also increased the use of safety coefficient.
Cab: rops/fops, big space, cab design features a full range of vision. Body seat safety bar can accommodate larger opetators, and can serve as handrails, comfort and support to achieve precise control operation.Cab enclosure with a roof, rear window, side windows.Cab air-conditioning system can be powerful in the most hot, cool and comfortable work environment.
Maintenance: just open the cover after the tail, on the cover, set off a cab, will be able to complete all inspections including engines, and filling work, and to maintain the filter and battery.In the maintenance of safeway and maintenance without having to raise start-arm, which can effective use of maintenance time, rather than wasted on maintenance and maintenance of open and close to the point.
Engines: perkins engines impoted, and with perkins engine manufacturers to form partnerships for many years, ensure that the mechines capable of performing various work environments.
Form: manufacture, pleasing in apperance, durability, hydraulic tank, fuel tank and chassis integration, in the structure to fully maximize the performance of the machine, arm and body to work the perfect combination.Operation system: the operating system can choose the advanced mechanical manipulation of clear structure and easy maintenance. Pilot control lever controls the various types of instrument parameters, can greatly improve operator comfort.
Leveling system: adopts imported machinery or hydraulic leveling system;leveling system, not only to improve to become more effective, but also increased the use of safety coefficient.Scalable chassis and dozer blade could be retracted when the excavator pass through narrow space and when they reachout could raise whole machine's stability.
Deflectable working device makes it work flexible even in a small and narrow space.
Full closed pros/fops cab is optional, imported luxury seats, safe and comfortable.
Turnover armrest makes driver get on or get off conveniently.
Standard heater
Standard hydraulic power output pipes.
Optional gps satellite positioning system and remote monitoring system.
2760*1060*2550mm
21887 Construction Equipment Machinery Suppliers
Short on time? Let Construction Equipment Machinery sellers contact you.
1. Super-strong steel structure made of extensive imported original parts, ensuring more stability and reliability for the concrete block machine body.
2. The whole process uses a plc aptitude control and dialogue system of human-machine interface, easy to analyze the chance signal, ensure the best operation effect.
3. High-efficient and super-strong vibration system, computer-control flow pressure of the hydraulic system, realize vertically synchronous vibration, frequency conversion, and braking, with synthetic output compounded with double vibration sources, thus greatly increase product compactness and mold-box service life.
4. The cloth system adopts semi-closed screen reticular rotational feeding unit to feed materials forcedly, with evenness and even speed, ensuring product intensity.
5. Fitted with special hydraulic loading unit, readily realize mass and automatic production, saving a great deal of human power, maintenance field, and circulating fund investment.
.C.F" (korea) heavy duty concrete vibrator shafts, head dia 32mm, 38mm, 45mm length 6 meter long, packed in carton box. Supply with petrol engine or electric motor.
Packed in carton box
Please read completely through these insturction before using the crimper.
your DOUGLAS DE 1600 HAND CRIMPER is supplied factory pre-set for quic change-over between most aluminium window systems.
PLEASE NOTE :
The crimping bench should be constructed in such a way as to offer suitable support for the material being crimped, in order to protect material being crimped from damage, it is advisable to cover the bench bearers with carpet to similar and keep the surfaces clear of swarf or objective likely to damage material surfaces.
SETTING UP
Remove crimper from box, locate on corner of suitable bench, which must be a robust and stable comstruction. Secure to bench with four M10 counters unk bolts or screws. Insert handles into handle sockets and secure with loking screws which must locate into dimples provided on handle ends. Remove toggl clamp from packing and fix to top of anvil block with two M6 x 10 socket cap screws which are located in the anvil block.
WARNING :
(1) Do not operate the crimper unless both handles are secured as described above, failure to comply may result in the handles slipping out of the sockets and causing a hazard to the operator.
(2) The punch heads are sharp and must be handled with care.
The DE 1600 hand crimper is designed for two handed operation by one operator only. It is the operators responsibility to ensure that the path of the punch heads are unobstructed are operating the hand lever handles.
TOOLING CHANGES
ANVIL INSERT
(1) Loosen locking screws (R) Fig. 1 and lift of insert (Q)
(2) Slide alternative insert into place, ensure face marked "TOP" is uppermost, locate firmly on bottom face or pins, ensuring that the rear face of the anvil insert sits flat against the anvil block.
CRIMP PUNCH HEADS
(1) Remove completely the retaining screws (J) Fig 1
(2) Pull Punch Heads our of location slots.
(3) Clean all location faces.
(4) Select correct punch heads to match anvil insert, push into location slots, replace retaining screws (J) and screw down.
TOGGLE CLAMP ADJUSTMENT
(1) Select short mitred corner from off-cuts of profile to be crimped, insert correct cleat (s) and corner brance (s) and locate corner on anvil insert.
(2) Adjust clamp spindle (v) Fig 1. so that when clamp lever locks ito forward locked position the test corner is held by the clamp pd, with a pressure equivalent to a firm finger pressure.
(3) Tighten clamp spindle lock nuts.
PLEASE NOTE !
If the clamp pressure is set to high, distortion of profile will occur resulting in poor crimping.
CRIMPING TEST JOINT
Before starting production it is advisable to test toooling changes as follows :-
(1) Leave small sample corner piece in position after setting Clamp.
(2) Bring the handles in towards the centre until Cr5imp Heads touch the profile.
(3) Open box section profiles the crimp action can be performed by applying equal pressure to both handles simultaneously until the Link Ars (F) Fig 1. lock into a straight line with Punch Heads.
(4) When crimping heavy gauge or closed box section profiles it may be found easier to hold one Crimp Punch Head firmly against profile for support whilst the other Head is crimped into it's full depth. Then with a slight alteration in stance, the first head can be pushed to it's full depth.
(5) Both crimp Punch heads should be withdrawn from the profile simultaneously.
PLEASE NOTE !
Under no circumstances should any one Punch Head be used without firm support of the other one. failure to observe this basic rule will result in the profile frame moving on the anvil insert, a poor crimped joint being produced and possible damage to the Crimper.
SETTING CHECK
The crimper is supplied factory set and has been test crimped prior to dispatch if for any reason the setting of the crimpter is in doubt the following procedure should be adopted.
(1) Cut a sample corner of material to be crimped
(2) Carefully check the cut and establish that the cut is a true 45, flat and at 90 to both legs of the section.
(3) Offer the appropriate setting piece to the anvil insert and check that the setting is as shown Fig. 2
(4) The punch heads tips should engage onto the slope of the cleat as shown and should either just "skim" the setting piece or clear with minimal clearance.
(5) The punch heads should ride down the slope until the link arms lock into straight line with the punch heads. The initial setting for the depth to which the punch heads should run is approximaterly two thirds of the full tepth see Fig. 2 The optimum setting is best established by carrying out test crimps and checking results.
PLEASE NOTE
A Setting Piecd can be made up by fixing with a suitable adhesive, two packing strips to the back of a cleat that is to be used in the system. The packing strips must be eqial in thickness to the wall of the profile to be crimped.
ADJUSTMENTS
Should the crimpel require resetting, both the anvil position and the depth of bite of the crimp heads are fully adjustable
ANVIL ADJUSTMENT
1) Remove the clamp assembly (U) by removing 2 screws (T), this will reveal a socket head screw. Slacken this screw.
2) Slacken the four nuts at the extreme rear of the crimper (S).
3) Using the setting piece as a guide, adjust the anvil towards or away from the crimp punch heads by turning the nuts. Set the anvil so that the crimp punch heads ride down the slope of the setting piece as shown in Fig 2.
ADJUSTMENT OF PUNCH HEADS
Each ram assembly is secured tgo the casting by 2 screws (P), slaken to allow the punch head assembly to slide in the casting. By slackenning the lock nut and adjusting screws (N), the position of the punch heads can be adjusted. Adjustments should be initially set so that the crimp punch heads run down the slope on the setting piece to approximately two thrids depth. The assembles must be locked in this position by re-rightening the socket screws (P). The final depth setting is best established by carrying out test crimps and making minor adjustments until satisfactory results are obtained.
NOTE
Setting the bite of the punch heads too deeply is to be discouraged, if set too tight the resulting joits will not necessarily be tight. "bottoming out"on the cleat is not necessary when trying to obtain a good quality crimp.
An indication that the cimper is set over tight, is difficulty encountered when withdrawing crimp punch heads from the crimped material
Ensure that all the bolts and nuts are tightened after adjustment have been carried out to maintained settings.
is it important that when the crimper is finally set, the heads should both run equal depths on the test piece.
It is important that the anvil is set so that the crimp punch heads ride down each slope in the same manner, i.e. the anvil must not be set askew relative to the crimp punch heads.
MAINTENANCE
Standard packing by using wooden box for which we have government policies and standards for safe delivery of the products. we are also arranging the third party inspection for quality of products and packaging which is useful for clearance of goods specifically for Africa.
Performance features
1 special burners, adapted to use all kinds of fuel: light and heavy fuel oil, natural gas, coal
2 drying drum with reliable output, rock wool insulation layers design, energy-saving consideration
3 four-grade screening, 4+1 hot storage bins
4 dust filter ensure the environmental emissions
5 dust collection system included
Specifications of sap64
Plant output: 64 tph
Batch mixer: 800 kg
An ideal plant for maintenance work or medium road project, because it combines wide range of configurations.
Sap120 asphalt mixing plant is really the best choice for its excellent production / price/quality.
Finished storage bins optional
Water filter or bag house filter
Performance features
1.Special burners , adapted to use all kinds of fuel: light and heavy fuel oil, natural gas, coal
2.Drying drum adopted friction driving system, rock wool insulated layer
3.Pre-assembly sections, reduced erection cost and time
4.Bag house filter , with 450 lowest dust emissions, meet all environmental restrictions
Mixing tower include 4 sections
1.Screen sections , eccentric shaft vibration design, with 21.4 sq.M
2.Hot bins sections , 4+1 silos , emergency overflow included
3.Weighing for aggregate, filler, bitumen and mixer sections
4.Optional hot mix storage bins , under mixer
Advantages
1.Economical energy consumption
2.Reliable output capacity
3.Modular type mixing tower
4.Flexible configuration option
Specifications of sap120
Output120 tph
Batch mixer1500 kg
Dryer drumDia:1800 mm ;length: 8000 mm
Mixing towerHeight:15500mm
Discharge height: 3500mm.
Wooden cases
21887 Construction Equipment Machinery Suppliers
Short on time? Let Construction Equipment Machinery sellers contact you.
