We are a company specialized in manufacturing the gypsum powder production line with annual output from 20,000 to 150,000 tons. We can offer complete set of gypsum powder production equipment, mineral wool board equipment and gypsum board equipment.The success rate of installation and commission reach to 100%. We have got three patents of China (patent number is zl200420091828.4,zl02205203.8,zl01279132.6).We assure you our equipment with super quality and competitive price.
Sand washer is used to wash and select man-made sand (including natural sand). It is widely used to select raw materials by washing in industry such as quarry, mining, building materials, transportation, hydropower and concrete stirring station.
Working principle of sand washer:
When it is working, electric motor makes the impeller rotate slowly with the help of v-belt, decelerator and gear. Sand and gravel are conveyed to the washing tank through feeder. They tumble and rub each other with the rotating of impeller to remove the foreign substance and destroy the vapor canopy wrapping the sand.The destroying of vapour canopy can facilitate the dehydration. At the same time, water added with high pressure will wash away the foreign substance and foreign body with low specific density to be discharged from over fall weir. Then the washing is finished. Clean sand and gravel are taken to the outlet sank by impeller.
Features of sand washer:
1. Simple structure with steady performance. Impeller rotating bearingí»s separation from water and the materials protects itself from being damaged.
2. When used in quarry, it has superior advantages compared with the traditional spiral sand washer as follows
(1)less fine sand and stone powder will be missing,
(2)sieve is the only part easy to be destroyed
(3)it can be used for a very long time without repairing.
This series of sand washer is produced combining advanced technologies and current situation in the sand industry. It possesses the features as following: high efficiency, reasonable structure, high throughput, little sand missing. Further more, its gearing is separated from sand and water, so its failure rate is much lower than that of the common sand washers, it is the best choice for the upgrading of the sand industry.
This sand production line has features of high automation, low operating costs, high crushing ratio, low energy consumption, large output, convenient maintenance, uniform granularity and good shape of the products, reasonable gradation, and the produced sand conforms to the national standard of construction sand. The whole line is highly automatic with low operation cost, high crushing ratio, low power consumption, high capacity, low pollution and easy maintenance. The size of the finished product is even and in good shape, which meets the national sand-making standards.
The benificiation Equipment flow produced by our company can provide you with all-around technical support. According to different customers and different mine, my company design different beneficiation complete sets of equipments for you.
Automatic hydraulic block making machine qt-3000
Widely used to produce big size curb stone, crash barrier, etc.
Moq:1 set
1.Main technical datas:
Max.Pressure 300t
Pump output 63ml/r
Total power 14kw
Overalll dimension 8000x2510x2400mm
Production capacity/shift 300-700pcs(curb
Stone)/8hours
2.About product qf-3000:
The hs-3000 hydraulic presssure model has multi-functions that can be described as below.
2.1 highly automatic with fast production speed.
2.2 it is equipped with belt conveyor and can supply the raw mateial automatically by the bunker, so as to reduce the labor intensity and improve prodution effeciency.
2.3 widely used to produce all kinds of big size curb stone, turf block, crash barrier, as well as all kinds of paver blocks.
Normal export standard
21887 Construction Equipment Machinery Suppliers
Short on time? Let Construction Equipment Machinery sellers contact you.
Performance & general features
Power supply:Three-phase 380V/660V, 50Hz/60Hz accept customization
Polarity:2, 4, 6 and 8 standard poles
Functioning:Continuous Duty: S1
Centrifugal force: 1KN-200KN
Range of output:100W-15KW
Speed:700rpm-3000rpm
Insulation class:Class B,Class F
Level of protection:IP 54,IP55
Electric motor:Three-phase asynchronous motor
Mineral fiber board is a kind of newly decorative material in the world,more and more people realise its superiority.It is widely used in luxury building for fireproofing,damp proofing,heat preservation,sound absorbing and environmental protection performances. It has the features of low investment ,easy to operate ,space small ,and high efficiency.
Paper gypsum board production line is the equipment which produces new building materials--paper gypsum board.Its production process is:ripe gypsum, water and all kind of ingredients that automatically precision measurement, by the continuous, automatic transmission system into the mixture into a homegeneous slurry spred to the continuous movement forward in the gypsum board surface of the paper, in advance process, after shock, the slurry was complete encapsulation of paper from top to bottom.And squeezed into the very rules slab, the slab continuous production line in the strict control of the speed and speed and stability to continue to move forward gradually formed a certain itensity, and shape the rules of wet gypsum board, the cut precision control system set by the precise cut into veneer.Veneer orderd by the control system topology, turning it over into the dryer.The drying temperature is strictly controlled, the board absorbed water lost to evaporation.Plate from the dryer, and advance the process of gradually cooling down the production line.After turns hostile every two stiff surface to fold once more gathers, saws after the reason the board both sides shuts off the regular size, transmits to the automatic hay stacker, piles up the end product waregousing.This prouduction line mainly by three major part is composed, namely.Material room, heating system, integral unit.
It is a new model for installation and maintenance of highway anti-collision guardrail post and beam newly developed according to usersf+ needs. (the equipment has obtained the national patent, no.: zl 01 263422.0). The functions of this product are the same as njj series truck-mounted pile drivers. It adopts independent diesel engine as its driving force. The driving speed is 40-60 km/h. The equipment integrates pile driving and pile extracting, with 240fp rotating device. The equipment does not need turn the direction during driving and drawing the guardrail post on both sides. The equipment can operate independently when separated with the chassis, can adjust the hydraulic driving directions. It is equipped with brake device which is safe and reliable in operation.
Main technical specifications
Type of hydraulic hammer Tdb180 Tdb230
Size (lf+wf+h) Mm 4200f+1800 f+2800 4200f+1800 f+2800
Engine power Kw 16.2 20
Radius of gyration Mm 2100 2100
Lateral distance Mm 860 860
Highest working height Mm 4680 4680
Working pressure Mpa 16 16
Pile extracting force Kn 78.4 96.5
Impact frequency Hz 5.8-13 10-15
Working height of hydraulic hammer Mm 700-3000 700-3000
Speed Km/h 40-60 40-60.
It is a new product developed by us. The product claims good mobility, low oil consumption and reliable brake system. The cab can hold 5 persons, with air conditioning device and can carry installing and repairing materials such as guardrail posts and beams of around 2.5 ton. The chassis of the truck mounted pile driver is isuzu brand vehiclef+s chassis. Special mounted equipment is national patented product, the patent no. Is zl 01 263422.0. The special hydraulic equipment has appropriative tools, which can do pile driving and pile extracting for guardrail post easily, with turning around of 240fp, so that it is unnecessary to turn the direction of the truck-mounted pile driver when driving and drawing the posts on both sides. With the characters of easy operation, convenient repairing and good reliability, the product can greatly reduce the working strength, improve the installing and maintenance quality and speed, thus being the best product for installation and maintenance of highway guardrail post and beam. The product has been widely applied to the dozens of highway in the country; all these products are quite welcomed by users.
Main technical specifications
Item Unit Njj5071tqx Njj5072tqx
Type of chassis Nkr77lllwcjay Nkr77lllwcjay
Weight Kg 4300 4350
Max. Weight Kg 6500 6550
Max. Load Kg 2200 2200
Person capacity Person 5 5
Size (lf+wf+h) Mm 6250f+1880f+2850 6250f+1880f+2850
Max. Speed Km/h 95 95
Rated power Kw 96 96
Rotating speed R/min. 2999 2999
Working pressure Mpa 16 16
Pile extracting force Kn 78.4 96.5
Working height of hydraulic hammer Mm 700-3000 700-3000.
The product is mainly applied to repair the crashed and wave shape guardrail beam of highway through 6/7/8/9/10 rollers and accessorial equipment to carry out the reshaping and recovery of guardrail beam of highway, avoid the crook or twist of guardrail beam, thus enabling them to be reused. This is the most perfect equipment in the world with stabilizing performance, easy operation, economical and high efficiency.
Main technical specifications
Rectifying speedtheoretical speed: 3-5m/min.
Roller diameter++80 mm
Roller quantity6/7/8/9/10
Rated power30 kw
Rated revolving speed132-1320 r/min.
G.W.5000 kg
Size of working platform450f+500f+4000 mm
450f+500f+2000 mm
Working circumstanceheight above the sea levelfn1500m
Temperature of circumstance:-20f+f++45f+
Relative humidityfn98%.
Fs2
Spec/model Fs2
Crimping force(ton) 280
Max hose diameter 2f+f+ 6sp/ 3f+f+2sp
Dies included 12
Max opening with dies +50mm
Die loading *qct option
Pump(/option/) 10/(2s)
Motor:380v 3 phase Siemens
Power option 230v/380v 3ph only
Crimping/hour max 1300
Length mm 850
Width mm 650
Height mm 1550
Weight kg 1398.
Crimping machine accessories
Model Capacity Type
Cutter sc76 3f+f+ wire hydraulic hose Automatic
Cutter sc51 2f+f+ wire hydraulic hose Automatic
Skiver 51 2f+f+ hose skiving
Hose marker Manual/pneumatic(automatic)
Testing bench(stain steel) 0-230 mpa
Hose cleaning machine Up to 2f+f+ hydraulic hose with fittings Water jet
Control option: the price of plc control option(big touch screen for automatic setting and ease of use) for s series are available.We use high quality and durable siemens plc systems and touch screen.*qct(quick die change system include quick change die fork, quick change dies, quick die change stand).
Note: price and specification may change at any time without prior notification.
Larger crimping range or full customized solutions available upon request.
Dies for air condition hose, gas hose or other metal tubing dies are available upon request.
21887 Construction Equipment Machinery Suppliers
Short on time? Let Construction Equipment Machinery sellers contact you.
