Coal fly ash; Grade 1/2/3; Standard GB1596-91; Large quantity and low price are available for you
Uses SM-P is recommended strongly for use in all ready-mix, precast, and prestress concrete applications where low water-cement ratio, low permeability, high durability, high strength concrete is specified or high slump flowable concrete is required. SM-P can be applied in various concrete, including high strength concrete, high fluidity concrete, high duration concrete, aluminate cement refractory concrete, grouting material, steam curing concrete, high strength mortar, gypsum products, and so on. Advantages Increase concrete early strength. Promote workability. Increase flowability. Increase cohesiveness and segregation resistance. Shorten mold take-off time. Keep water/cement to a minimum. Promote air stability. Compatible with cements, gypsums and other admixtures. Reduce bleeding at high slumps. Woven fabric bag with plastic liner. Net weight: 20kg +/- 0.13 kg It is easy to absorb moisture from air. So it must be kept in original sealed bag and stored at dry condition. The shelf life is one year. This product is non-toxic and non-flammable. So there is no special transportation requirement.
Clinker - raw material for cement. In bulk packing
HCSA binder is a hydraulic binder based on calcium sulphoaluminate, rather than calcium aluminates which are the basis of calcium aluminate cement or calcium silicates which are the basis of portland cement. The difference gives hcsa binder properties particularly suited to formulators of products such as self-leveling or self-smoothing compounds, rapid hardening screeds, tile adhesives, non-shrink grouts, rapid setting and special mortars. Hcsa binder is used in formulated products either as a hydraulic binder by itself or with the addition of calcium sulphates, or in combination with portland cement. The setting time is quicker than that of portland cement, and it also has a rapid strength development. Hcsa binder does not release free lime during hydration thus eliminates the major cause of efflorescence.
This product is an inorganic rigid waterproofing material which based on the special sulphoaluminate cement, and matching the suitable type and quantity admixture.
Polar bear non-shrink grouting material is blended through a special procedure by specially selected cementations material, carefully selected fine aggregate and admixture. It owns the characteristics of high flow, non-shrinkage, early strength and high strength. Functionally they are divided into two categories include four products: high strength, extra early strength.
Items specification 20%(liquid) 40%(liquid) 97%(powder) Appearance pale brown viscous liquid light yellow powder Density(20) 1.05 0.02 1.120.02 bulk density 500~600kg/m3 Ph (20) 7~8 7~8 20%in water 6~8 Solid content(%) 20.01.0 40.02.0 971.0 Cl-(%) 0.10 % 0.10 % 0.01 % Na2So4(%) 4.0 4.0 2.6 Na2O+0.658k2O(%) 5.0 5.0 5.0 Solubility very soluble Performance dosages forp.O.42.5 standard cement(wt%of cement) 1.000.1 0.500.05 0.16~0.3% Fluidity of cement paste (mm) 240 240 240 Water reducing of mortar 20 20 20
Perlite ore 15 kg-20 kg-50 kg
Asbestos Non-asbestos yarn, asbestos braided rope, asbestos tape, asbestos cloth, sheet, asbestos packing, fiberlass, glassfiber yarn, glassfiber rope, glassfiber tape, glassfiber cloth, glassfiber blanket, ceramic fiber yarn, ceramic fiber rope, ceramic fiber tape, ceramic fiber cloth, ceramic fiber paper, ceramic fiber board, ceramic fiber blanket, anti-corrosion tape, carbon fiber cloth, carbon fiber tape, carbon fiber rope
Diluted benzoyl peroxide Cas no.:94-36-0structural formula: Chemical formula:c14h10o4 Molecular weight:242.22 Specifications Item specification is pecification ii Content(c6h5co)2o228 + 132+1 Water_2.0_4.0 Fineness(series r40/3, ¢200*50/0.075mm test sieve, residue on sieve)_10 Hydrochloric acidtest conformed Ammonium salttest conformed Barium salttest conformed Ph(10aqueous solution)6-9 Heavy metal(as pb)_0.004 Arsenic(as as)_0.0003 Usesbe used to bleach wheat flour. Be stored in cool, dry and ventilated warehouse, free from heat, sunlight, can't be stored together with toxic or harmful goods. 20kg/25kg/paper carton.
Hec 5-100000mpa.S
Dimethyl carbonate
Cement clinker Used in cement industries
Activated bleaching earth Very effective for rice bran, soya oil
HPMC For Construction HPMC for construction is a non-ionic cellulose ether obtained by alkalization, etherification, neutralization and washing of cellulose.HPMC powder has good properties of thickening, dispersing, emulsifying and film-forming, and it is the first choice for the production of high-quality building material additives. The use of hydroxypropyl methyl cellulose in construction In construction, putty powder is used in very large quantities. About 90% of HPMC in construction is used as putty powder additives, and the rest is cement mortar and glue, used as thickening and water retention agents. The amount of HPMC chemicals CAS9004-65-3 added to construction materials is very low, only 0.1%-1%, but it plays an irreplaceable role, which can significantly improve the water retention, fluidity and lubricity of construction materials. Building materials with added HPMC cellulose are easier to mix and use, improving the efficiency of construction workers, extending open time, improving bond strength, and forming a smooth and delicate surface coating. - Construction HPMC powders are used in cementitious mortars and grouts to improve ease of use, adhesion and water retention. - Hydroxypropyl methyl cellulose is also used in self-leveling compounds, tile adhesives and grouts to improve flow and workability. -Construction HPMC is commonly used as a binder and thickener in coatings and paints. - HPMC binders are also used in gypsum-based materials such as wallboard and ceiling tiles to improve workability and reduce water absorption.
Toluene Diisocyanate TAR / TDI TAR Uses - Curing Agent in Construction / Paint Industry Bulk Volumes GCC Origin
Bondacoat Ar Bondacoat Ep Bondacoat Pva Bondacoat Sbr Epogrout Hs Rendragrout Hf (Adhesive & Grouts) Tile Adhesive Ep Tile Grout Ep Epomortar Fc Eposcreed 10 Fillgrout Ep10 Fillgrout Pu40 Rendacoat Fc Rendagrout Hf (Concrete Repairs) Concoat Ep100 Concoat Ep150 Concoat Ep250 Concoat Resin Concoat Sl Elastoguard Pu Prime Ep100 Tg Prime Ep100 Prime Eps Prime Eps40 Proofseal Pu Concoat Eps Concoat Ept500 Deguard Sheild Sn- Wr636 Deguard Sheild Sn Waterbased- Wr637 Concoat Slc90 Elastocryl 700 Elastocryl 800 Elastocryl 900 Epocoat Epwp Epoflex 500 Proofseal Pt Epocoat Epwp Epoflex 500 Proofseal Pt Proofseal Pu Epogrout Hs
Silica sol is a colloidal solution of amorphous silica dispersed in water. Because of the surface reactive hydroxyl group of silica, it can be bonded with carboxyl, amino and ester groups. It has a wide range of application value, and can be used in coating, ink, casting, paper making, battery, electronic polishing and other industries.
AMPS FLUID LOSS ADDITIVE Risol FL1300S PHYSICAL AND CHEMICAL INDICATORS Appearance Bulk Density, g/cm3 Water-Solubility 0.315mm Sieve (45 mesh) Residues, % White or faint yellow powder 0.70±0.20 100%
AMPS Fluid Loss Additive Risol FL 5000S Product Description Risol FL5000S is a water-soluble synthetic viscosifying polymer,which can control fluid loss through Adsorption and aggregation reducing pore size and enhancing viscosity of water phase. Risol FL5000S fluid loss additive is non-retarding Polymer, which makes it ideal for lightweight cementing compositions that typically have long thickening times. The additive promotes good compressive strength at low temperatures, and it performs well in seawater and fresh water.It can be used with seawater, and high concentrations of salt. Specially designed for the application in low density cement slurry system. Generates thickening effect on the cement slurry and enhances cement slurry's suspension stability. cement slurry system is stable with little free fluid. It provides exceptional filtrate control when used with retarders at bottom hole circulating temperatures up to 160C. Technical Datasheet Requirement Specification Fluid loss, ml/(90 C,6.9MPa,30min) 100 Thickening time, min/ (90C,35.6MPa) 60~160 Initial consistency, Bc 30 Compression strength, Mpa, /(105C,20.7MPa,24h) 14 Free fluid, % 1.5 Cement slurry:API Class G cement (HSR): 800g, distilled water: 352g, Risol FL 5000S: 6.4g,Risol RT100S:2g, defoamer:1.6g. Features Appearance : Colorless or light yellow powder; Temperature range: 30 C-160C (BHCT); Normal dosage: 0.6%-1.5%(BWOC); Package:25kg/bag; Guarantee Period: 1years.
