Toshiba CE4W1 Printhead
Unique technology of jetting multiple drops onto a single dot creates wide range of grayscale with minimum 6 pl to maximum 90 pl (15 drops) per dot.
Higher driving frequency (especially at small drops) CA4 realizes 28KHz at 1drop (6pL) mode, which is twice as fast as the existing CA3 using the same interface.
Printer Compatibility: TOSHIBA Printer
Remarks: Original
INDOELECTRONIC.COM sells Printer and Part Printer : Cannon, Epson, Konica, Mimaki, Mutoh, Ricoh, Roland, Seiko, Spectra, Xaar, etc.
Buy TOSHIBA CE4W1 PRINTHEAD at indoelectronic with cheap price, best quality guaranted, international warranty.
Price : USD 1,225.00
Min Order : 1 Pcs
Lead Time : 6 9 Days
Port : CIF / Kualanamu International Airport
Terms : T / T, Western Union, Money Gram
Shipment : FedEx, DHL, UPS
Product : Ori and Ready in stock
Address : Jl.S.Parman No.21/272
City/Zip Code : Medan, 20151
Province : Sumatera Utara
Country : INDONESIA
INDOELECTRONIC.COM sells Printer and Part Printer : Cannon, Epson, Konica, Mimaki, Mutoh, Ricoh, Roland, Seiko, Spectra, Xaar, etc.
Buy EPSON R1900 / R2000 / R2880 PRINTHEAD (DX5)-F186000 at indoelectronic with cheap price, best quality guaranted, international warranty.
Price : USD 444.00
Min Order : 1 Pcs
Lead Time : 6 9 Days
Port : CIF / Kualanamu International Airport
Terms : T / T, Western Union, Money Gram
Shipment : FedEx, DHL, UPS
Product : Ori and Ready in stock
Address : Jl.S.Parman No.21/272
City/Zip Code : Medan, 20151
Province : Sumatera Utara
Country : INDONESIA
PB2 is designed to provide high print speed ,durability and advanced solutions for bank,financial services,post office or public administration to print cheques,multi-copy forms,passbooks and receipts.it's a great way to bring reliability,flexibility and a low total cost of ownership to your official printing.
print speed up to 660 characters per second
print head life of 600 million stroke/wire
automatic paper alignment and auto gap adjustment
multiple interface design for printer sharing feature
multi-emulation embedded
on line upgrade-firmware&characters set
ready to support new applications(scanning,MSRW,MICR)
power consumption is 5W(in standby mode)
Printing Method
Printing Technology HP Thermal Inkjet, Scalable Printing Technology
Print Resolution Input: 1200 x 1200 dpi
Optimized: Up to 2400 x 1200 dpi
Print Speed Best Glossy Media: 15 min/page (A1/D)
Normal Glossy Media: 7.9 min/page on A1/D
Normal Coated Media: 4.2 min/page on A1/D
Draft Coated Media: 2 min/page on A1/D
Ink Type HP Vivera pigment ink
Ink Palette Cyan, magenta, yellow, light cyan, light magenta, matte black, photo black, light gray
Ink Droplet Size 4 pl: light cyan, light magenta, light gray, photo black
6 pl: cyan, magenta, yellow, matte black
Number of Nozzles Per Color: 1056 nozzles
Total: 8448 nozzles
Line Accuracy �±2%
Lightfastness ~200 years fade resistance
Water Resistance Water-resistant on a range of HP creative and specialty media
Image Quality
Color Accuracy Median: < 1.6 dE2000
95% Of Colors: < 2.8 dE2000
Color Stability < 1 dE2000 in less than 5 minutes
Repeatability Average < 0.5 dE2000, 95% of colors < 1.4 dE2000 print-to-print repeatability
Maximum Optical Density 4 L min / 2.5 D
Paper Handling
Paper-Feed Method Sheet feed, roll feed, automatic cutter (cuts all media except canvas)
Media Types Photographic, proofing, fine art printing material, self-adhesive, banner and sign, bond and coated, film, backlit, fabric/textile
Media Weight Up to 133 lb (500 g/m2)
Media Thickness Up to 31.5 mil (0.8 mm)
Paper Sizes Sheet: 8.5 x 11.0 to 24.0 x 66.0 (21.59 x 27.94 to 60.96 x 167.64 cm)
Roll: 11.0 to 24.0 (27.94 to 60.96 cm) wide
Printing Method
Printing Technology HP Thermal Inkjet
Maximum Resolution Up to 2400 x 1200 optimized dpi
Print Speed Print Time Line Drawing: 21 sec/page on A1/D (economode)
Print Speed Line Drawing: 120 A1/D prints per hour (economode)
Ink Droplet Size 6 pL (C, M, Y, G, pK); 9 pL (mK)
Ink Type 5 dye-based (C, M, Y, G, pK; pigment-based (mK)
Ink Cartridge Configuration 6 individual ink cartridges (cyan, gray, magenta, matte black, photo black, yellow)
Ink Cartridge Capacity 130 or 300 mL
Margins Top x Bottom x Left x Right:
Roll: 0.12 x 0.12 x 0.12 x 0.12 (3 x 3 x 3 x 3 mm)
Sheet: 0.12 x 0.87 x 0.12 x 0.12 (3 x 22 x 3 x 3 mm)
Line Accuracy ±0.1%
Printhead 1 (C, G, M, mK, pK, Y)
Minimum Line Width 0.8 mil (0.02 mm) (HP-GL/2 addressable)
Guaranteed Minimum Line Width 2.8 mil (0.07 mm) (ISO/IEC 13660:2001(E))
Maximum Optical Density Black: 2.15 D (6 L* min)
Applications Line drawings, renderings, presentations, maps, orthophotos
Memory 64 GB (file processing)
320 GB
Media Types & Handling
Paper Handling Input: Automatic front-loading roll feeds, sheet feed
Output: Integrated output stacking tray (from A4/A to AO/E, with up to 50 A1/D-size capacity), media bin, automatic cutter
Printing Method
Printing Technology HP Thermal Inkjet
Maximum Resolution Up to 2400 x 1200 optimized dpi
Print Speed Print Time Line Drawing: 21 sec/page on A1/D (economode)
Print Speed Line Drawing: 120 A1/D prints per hour (economode)
Ink Droplet Size 6 pL (C, M, Y, G, pK); 9 pL (mK)
Ink Type 5 dye-based (C, M, Y, G, pK; pigment-based (mK)
Ink Cartridge Configuration 6 individual ink cartridges (cyan, gray, magenta, matte black, photo black, yellow)
Ink Cartridge Capacity 130 or 300 mL
Margins Top x Bottom x Left x Right:
Roll: 0.12 x 0.12 x 0.12 x 0.12â?³ (3 x 3 x 3 x 3 mm)
Sheet: 0.12 x 0.87 x 0.12 x 0.12â?³ (3 x 22 x 3 x 3 mm)
Line Accuracy �±0.1%
Printhead 1 (C, G, M, mK, pK, Y)
Minimum Line Width 0.8 mil (0.02 mm) (HP-GL/2 addressable)
Guaranteed Minimum Line Width 2.8 mil (0.07 mm) (ISO/IEC 13660:2001(E))
The Xaar 502 GS15 OR can be used as a replacement to Xaar 500/80 printheads (discontinued). An ICM (Interface connection module) enables X500/80 based printers to communicate with Xaar 502 printheads. The ICM requires a waveform loaded onto it by Xaar. In many cases, the ink system of the Xaar 500/80 based printer will also need some modification as Xaar 500 printheads has 4 ink feeds whereas Xaar 502 printheads have 1 ink feed). Our engineer team can help implementing these changes to migrate existing printers from 500/80 to 502 printheads.
Specifications
Active nozzles : 500
Print swathe width : 70,5mm
Number of rows : 1
Nozzle density : 180 Npi
Nozzle Guard : C&M
Ink types : Oil
Drop volume : 15 75pl
Number of grey level* : 6
Filter : No
Heater : No
TF Technology mode : None, Pulsed, High flow mode
Typical firing frequency @ Max DPD*: 8khz
Dimensions (WxDxH) : 104 x 17 x 100mm
Jetting orientation : Downshooter, horizontal and Skycraper (see picture)
Inlet / Outlet connections : Hose barb 4mm
The Xaar 501 GS8 U can be used as a replacement to Xaar 500/40 printheads (discontinued). An ICM (Interface connection module) enables X500/40 based printers to communicate with Xaar 501 printheads. The ICM requires a waveform loaded onto it by Xaar. In many cases, the ink system of the Xaar 500/40 based printer will also need some modification as Xaar 500 printheads has 4 ink feeds whereas Xaar 501 printheads have 1 ink feed). Our engineer team can help implementing these changes to migrate existing printers from 500/40 to 501 printheads.
Specifications
Active nozzles : 500
Print swathe width : 70,5mm
Number of rows : 1
Nozzle density : 180 Npi
Nozzle Guard : WFG
Ink types : UV
Drop volume : 8 â?? 40pl
Number of grey level* : 6
Filter : Yes (Last chance filter)
Heater : Yes
TF Technology model : None
Typical firing frequency @ Max DPD*: 8khz
Dimensions (WxDxH) : 104 x 17 x 113mm
Jetting orientation : Downshooter and Skycraper
Inlet / Outlet connections : Hose barb 4mm
The All New Xaar 1002 raises the standard in single-pass inkjet printing. Building on the market-leading Xaar 1001, this printhead delivers exceptional print quality and unrivaled reliability.
Exceptionally smooth print tones and solid areas which is perfect for printing amazing life-like images, pin sharp text and bold colours 1000 Optimised Geometry nozzles deliver significantly improved drop placement accuracy and consistent drop volume even with heavily pigmented and high viscosity fluids Excellent print uniformity delivers even colour density across the printhead and the entire print width 8 grey levels, chosen dynamically, at 360 npi give an effective resolution greater than 1000 dpi, for Xaar 1002 GS6 and GS12.
The new Xaar 1003 GS12C Ceramics Printhead is the next generation 1,000 nozzle ceramics printhead from Xaar. Building on the market-leading Xaar 1001 and Xaar 1002 Ceramics Printheads which led the digital revolution in ceramic tile printing, the Xaar 1003 GS12C Printhead delivers a step change in print performance for ceramic tile manufacturers.
The Xaar 1003 Ceramics printhead family introduces an important new feature the XaarGuard which provides the ultimate in nozzle plate protection, and coupled with other design innovations, achieves the longest maintenance-free production runs in the industry once per shift, or less. In addition, the new Xaar 1003 GS12C provides a step forward in consistent print quality across the wide print widths used for large tile, thanks to Xaarâ??s Tuned Actuator Manufacturing.
The Xaar 1003 GS12C printhead is fully backward compatible with Xaar 1002C and 1001C based ceramic printers. This ensures that ceramic tile manufacturers can maximize the return on their printer investment with the ability to install the 1003C printhead in 1002C or 1001C based printers as a single head replacement or, to upgrade full print-bars or, even upgrade complete printers to take advantage of the improved durability, print quality and productivity that the Xaar 1003Ceramics printhead delivers.
The Xaar 501 GS8 UR can be used as a replacement to Xaar 500/40 printheads (discontinued). An ICM (Interface connection module) enables X500/40 based printers to communicate with Xaar 501 printheads. The ICM requires a waveform loaded onto it by Xaar. In many cases, the ink system of the Xaar 500/40 based printer will also need some modification as Xaar 500 printheads has 4 ink feeds whereas Xaar 501 printheads have 1 ink feed). Our engineer team can help implementing these changes to migrate existing printers from 500/40 to 501 printheads.
Specifications
Active nozzles : 500
Print swathe width : 70,5mm
Number of rows : 1
Nozzle density : 180 Npi
Nozzle Guard : WFG
Ink types : UV / Oil
Drop volume : 8 40pl
Number of grey level* : 6
Filter : No
Heater : No
TF Technology mode : None, Pulsed, High flow mode
Typical firing frequency @ Max DPD*: 8khz
Dimensions (WxDxH) : 104 x 17 x 100mm
Jetting orientation : Downshooter and Skycraper (see picture)
Inlet / Outlet connections : Hose barb 4mm
The Xaar 502 GS15 S 180 can be used as a replacement to Xaar Proton 60pl printheads (discontinued). An ICM (Interface connection module) enables Xaar Proton 60pl based printers to communicate with Xaar 502 printheads. The ICM requires a waveform loaded onto it by Xaar.
Specifications
Active nozzles : 500
Print swathe width : 70,5mm
Number of rows : 1
Nozzle density : 180 Npi
Nozzle Guard : WFG
Ink types : Solvent
Drop volume : 70pl
Number of grey level* : 6
Filter : Yes (Last chance filter)
Heater : No
TF Technology�® mode : None
Typical firing frequency @ Max DPD*: 7khz
Dimensions (WxDxH) : 104 x 17 x 113mm
Jetting orientation : Downshooter (see picture)
Inlet / Outlet connections : Hose barb 4mm
This Xaar Omnidot 760 printhead is suitable for Mutoh Zephyr 65 / Zephyr TS printers. The Xaar Omnidot 760 provides the optimum in flexibility, quality, reliability and speed. Based on Xaarâ??s unique patented multi-pulse greyscale technology Xaar 760 is user-definable and delivers a choice of binary or dynamic variable drop sizes, ranging from 8pl to 40pl.
Each of the 760 nozzles are controlled independently to create a printed result with exceptionally smooth gradation and tonal range â?? ideal for high quality graphics, packaging and traditional print applications.
This is the original Mutoh part (number KY-09015).
Product Specifications
Active nozzles: 764
Print swathe width: 53.8 mm
Nozzle pitch: 70.6 �¼m
Nozzle density: 360 npi
Drop velocity: 6 m/s
Printhead weight: 130 g
Dimensions: 86 x 42.2 x 164.8 mm
Drop volume: 8 pl
Typical firing frequency: 40 kHz
Roland Original BN-20/FH740/RE-640/SOLJET PRO4 RF-640 Printhead (DX7) -6701409010
To be used with: Roland VS-420/VS-640/VS-640i/VS-540i/VS-300i, Roland FH740, Roland BN-20, Roland XR-640, Roland SOLJET PRO4 XF-640, Roland RA-640, Roland RE-640, Roland RF-640,
To be used with: Roland VS-420/VS-640/VS-640i/VS-540i/VS-300i, Roland RF-640, Roland FH-740, Roland RA-640, Roland RE-640, Roland BN-20, Roland XR-640, Roland SOLJET PRO4 XF-640 and Roland VersaCAMM Print & Cut VS-540/540I
Part no.: 6701409010
Remarks: Original
2939 Computer Printers Materials Suppliers
Short on time? Let Computer Printers Materials sellers contact you.
