Price US$1,099.00
Original Vutek GS Jetpacks Print Head 45083572 45093679 45095093
Printer compatibility: VUTEk GS2000 / GS2000 Pro / GS2000LX / GS2000LX Pro / GS3200 / GS3200 Pro / GS3250 / GS3250 Pro / GS3250LX / GS3250LX Pro / GS3250r / GS5000r / QS2 Pro / QS3 Pro
DP part number : PPHVU12817
This ASM, Jetpack Print Head Grey Scale Platinum is suitable for VUTEk GS-series printers. This printhead includes the heating element and the smoothing electronic board. The jetpack also includes a set of two Jet Clamps (part number 45083572 / 45093679 / 45095093) and screws to install and aligne the printheads on the Vutek printer. This is the original VUTEk part (number replacing numbers 45083572 / 45093679 / 45095093 / 45093679). This is the latest upgraded head that comes with the connector.
Price US$999.00
PressVu 200 (PV200) Printhead - Jetpack - AA90646 - Fits EFI/VUTEk Printers
VUTEk Part #: AA90646
Prime Printer Service Part #: PPS-AA90646
This Print Head/Jetpack fits the following models:
PressVu 200 (PV200)
Unique technology of jetting multiple drops onto a single dot creates wide range of grayscale with minimum 6 pl to maximum 90 pl (15 drops) per dot.
Higher driving frequency (especially at small drops) CA4 realizes 28KHz at 1drop (6pL) mode, which is twice as fast as the existing CA3 using the same interface.
The Toshiba CE4M printhead has high nozzle density with 636 channels and a high driving frequency (especially at small drops). The Toshiba CE4M printhead offers a wide range of drop volume, from 5 to 35 picoliters, with excellent dot placement accuracy and stable jetting with water circulation thermal control.
The Toshiba CE4M printhead is compatible with UV curable and oil-based pigment inks.
Specifications
Printhead Name: Toshiba CE4M
Active nozzles: 636
Print width: 2,11 (53.6 mm)
Grayscale levels: 16
Native resolution: 150dpi
Max. resolution: 300 dpi
Printhead weight (dry): 148 g
Ink Compatibility: Oil-based pigment ink and UV curable pigment ink
Drop volume: 5 35 pl
Typical firing frequency: 2.8 28 kHz
Dimensions (WxDxH): 85 x 70 x 23 mm
This Toshiba TEC CA4W on-demand piezo electric inkjet print head is designed for industrial applications with high print quality. Unlike conventional binary print heads, this grayscale print head technology is capable of jetting multiple drops within one dot allowing for an image to have 16 levels of grey, since each dot is created through a minimum of 6 pico litre to a maximum of 90 pico litre of ink.
The Toshiba TEC CA4W is suitable for UV curable and Oil based inks, has 2 ink inlet ports (which can be easily removed to be replaced with a 1 ink inlet assembly) and a chassis which provides a built-in water channel and complete sealing designed for easy temperature control. This is Toshiba original printhead. It carries a one year warranty. The jig tools used to calibrate and fit this head are available as related products.
Price US$559.00
Description:
This Toshiba TEC CA3W on-demand piezo electric inkjet print head is designed for industrial applications with high print quality. Unlike conventional binary print heads, this grayscale print head technology is capable of jetting multiple drops within one dot allowing for an image to have 8 levels of grey, since each dot is created through a minimum of 6 pico litre to a maximum of 42 pico litre of ink.
The Toshiba TEC CA3W is suitable for UV curable and Oil based inks, has 2 ink inlet ports (which can be easily removed to be replaced with a 1 ink inlet assembly) and a chassis which provides a built-in water channel and complete sealing designed for easy temperature control.
This new generation Kyocera KJ4B-YH is designed is designed for high-speed printing of water-based inks. It is a 600dpi one color printhead with a maximum drive frequency of 40kHz. It delivers high quality with a small drop volume of 5pl at 75 m/min by making use of 2,656 nozzles arranged across 108.25 mm wide print swathe with 0.042mm pitch, resulting in 30.000 drops per second.
The Kyocera KJ4B-YH is equipped with internal filters that eliminate foreign objects in ink and an internal heater that adjusts the impact of external temperatures. Its unique ink channel design provides a stable ink supply.
Price US$3,299.0
This new generation Kyocera KJ4B-QA is designed is designed for high-speed printing of water-based inks. It is a 600dpi one color printhead with a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 5pl at 75 m/min by making use of 2,656 nozzles arranged across 108.25 mm wide print swathe with 0.042mm pitch, resulting in 30.000 drops per second.
The Kyocera KJ4B-QA is equipped with internal filters that eliminate foreign objects in ink and an internal heater that adjusts the impact of external temperatures. It's a unique ink channel design provides a stable ink supply.
Specifications
Ink Type: Aqueous Ink
Dimensions: 200 Ã?? 25 Ã?? 59.3mm
Dry Weight: 420g
Total Nozzles: 2.656
Nozzle Pitch: 0.042mm
Standard Resolution: 600 x 600 dpi
Print Width: 108.25mm
Max. Drive Frequency: 30kHz
Drop Volume: 5, 7, 12 and 18pl
Max. Sprint Speed: 75m/min
Optimum Ink viscosity: 5.0 - 6.0 mPa*s
This new generation Kyocera KJ4A-RH is designed for high speed single-pass and multi-pass applications with printers using UV ink. It is a 600dpi one colour printhead with a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 5pl at 70 m/min by making use of 2,656 nozzles arranged across 108 mm wide print swathe with 0.042mm pitch, resulting in 30.000 drops per second.
The Kyocera KJ4A-RH is equipped with internal filters that eliminate foreign objects in ink and an internal heater that adjusts the impact of external temperatures. Itâ??s unique ink channel design provides a stable ink supply.
Specifications
Ink Type: UV Ink
Dimensions: 200 Ã?? 30 Ã?? 68.9mm
Dry Weight: 420g
Total Nozzles:2.656
Nozzle Pitch: 0.042mm
Standard Resolution: 600 x 600dpi
Print Width: 108.25mm
Max. Drive Frequency:30kHz
Drop Volume: 5, 7, 12 and 18pl
Max. Sprint Speed:70m/min
Input Voltage:3.3 V for logic / 29 V for driving
Temperature Control:Reservoir heater and thermistor are equipped
This new generation Kyocera KJ4B-0300 is designed for high-speed single-pass applications with printers using aqueous ink. It is a 300dpi two colours printhead with a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 5pl at 120 m/min by making use of 2,656 nozzles arranged across 112 mm wide print swathe.
Specifications
Ink Type: Aqueous Ink
Dimensions: 200 Ã?? 36 Ã?? 68.5mm
Dry Weight: 540g
Total Nozzles:2.656
Standard Resolution: 300 x 300dpi
Print Width: 112mm
Max. Drive Frequency: 30kHz
Drop Volume: 5, 7, 12 and 18pl
Max. Sprint Speed: 120m/min
Typical ink viscosity: 5.0-6.0 mPa
Price US$4,400.00
This new generation Kyocera KJ4A-TA is designed for high-speed single-pass applications with printers using UV ink. It is a 600dpi two colors printhead with a maximum drive frequency of 20kHz. It delivers high quality with a small drop volume of 3pl at 158 m/min by making use of 2,656 nozzles arranged across 108.25 mm wide print swathe.
Kyocera Inkjet Printhead Specifications
Ink Type: UV ink
Dimensions: 200 25 59.3 mm
Dry Weight: 540g
Total Nozzles: 2.656 (2x 1328)
Standard Resolution: 600 x 600 dpi
Print Width: 108.25 mm
Max. Drive Frequency: 20kHz
Drop Volume: 3,6 & 13PL
Max. Sprint Speed: 50 m/min
Typical ink viscosity: 6.0-6.5 mPa
Price US$3,499.0
This new generation Kyocera KJ4A-0300 is designed for high speed single-pass applications with printers using aqueous ink. It is a 300dpi two colours printhead with a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 4pl at 158 m/min by making use of 2,656 nozzles arranged across 112.35 mm wide print swathe.
Specifications
Ink Type: UV ink
Dimensions: 200 Ã?? 36 Ã?? 61.4mm
Dry Weight: 540g
Total Nozzles: 2.656 (2x 1328)
Standard Resolution: 300 x 300dpi
Print Width: 112.35mm
Max. Drive Frequency: 30kHz
Drop Volume: 4, 6, 10 and 14pl
Max. Sprint Speed: 158m/min
Typical ink viscosity: 7.0-7.5 mPa
The Konica Minolta KM512iLNB-30 print head is a robust print head , shear mode, piezo on-demand print head that is usable in binary mode only. This Konica Minolta print head has 512 nozzles with a droplet size of 30 picolitre and a native resolution of 360 dpi. It is compatible with solvent inks. This is Konica original print head and it includes the necessary waveform information. It carries a product warranty.
Specifications
- Technology: On-Demand Piezo Electric
- Drive System: Indepenent drive system
- Native Resolution: 360 dpi
- Cal. Droplet Size: 30 pico litre
- Tot. Amount of Nozzles: 512 (256 nozzles per line)
- Print Width: 72.2 mm
- Firing Frequency: 30,4 kHz
- Ink Compatibility: Solvent
- Heater: not integrated
The Konica 256 / 42pl Printhead is an entry level, compact, shear mode, piezo on-demand print head that is usable in binary mode only. It is suitable for both wide format and industrial applications.The Konica 256 / 42pl Printhead has 256 nozzles with a droplet size of 42pl and a nozzle resolution of 180 dpi. It is compatible with oil based and solvent inks. This is Konica original print head and it includes the Head ID and the necessary waveform information.
To be used with:
Aestrik InWear S3304K2 / InWear S3308K2
Megagraphic Extreme Compact Solvent XK 320
LIYU PJ3204 / LIYU PJ3208
Remarks: Original
Specification:
Drive Mode: Piezo Drop-On-Demand
Nozzle Resolution: 180 dpi
Nozzle Number: 256 nozzles
Drop Volume: 42pl
Ink Compatibility: Oil Based and Solvent
Heater: not integrated
The Konica 256/14pl Printhead is an entry level, compact, shear mode, piezo on-demand print head that is usable in binary mode only. It is suitable for both wide format and industrial applications. The Konica 256/14pl Printhead has 256 nozzles with a droplet size of 14pl and a nozzle resolution of 180 dpi. It is compatible with oil based and solvent inks. This printhead is not compatible with HP 8000 printers. This is Konica original print head and it includes the Head ID and the necessary waveform information.
To be used with: Human X-JetB 1808
Remarks: Original
Specification:
Drive Mode: Piezo Drop-On-Demand
Nozzle Resolution: 180 dpi
Nozzle Number: 256 nozzles
Drop Volume: 14pl
Ink Compatibility: Oil Based and Solvent
Heater: not integrated
The Konica Minolta KM1024i LHE printhead is a robust, shear mode, piezo on-demand printhead featuring an All-nozzle Independent Drive System with a Multi-line Structure. In contrast with the existing 3-cycle system drive, an independent drive system that enables simultaneous emission from all 1024 nozzles has been adopted. The high-density structure featuring 4 lines of 256 nozzles aligned with high precision enhances positioning accuracy to realize high-definition print quality. The Konica Minolta KM1024i LHE printhead offers a Maximum Drive Frequency of 27kHz, which makes it the ideal inkjet printhead for development of single-pass system inkjet printers capable of high-speed printing.
Environmentally-considerate Approved Green Product
The Konica Minolta KM1024i LHE printhead incorporates only approximately one-third of the petroleum-derived materials and toxic chemicals used in the current KM1024 Series. In addition, the nozzle unit surface area is the same as that of the KM1024 Series.
Specifications
Technology: Piezo Drop On-Demand
Native Resolution: 360 dpi
Cal. Droplet Size: 30 pico litre
Max. Drops in Greyscale: 8 drops
Tot. Amount of Nozzles: 1024 (256 nozzles per line)
Print Width: 72 mm
Firing Frequency: 27 kHz
Drive Voltage: 13+-3V
Ink Compatibility: UV (White)
Heater: integrated
Dimensions: W131mm x D17mm x H94mm
Weight: Approx. 150g
