òMobile Cell Phone Battery Travel Charger NEW ò100% new high quality Advanced switching power supply circuit, highly efficient òAdvanced control chipset, stop charging automatically when battery is full charged òConnect the charger to the AC power source, the Charge light is On when the battery is charging òColor:As designed òSpecification: òInput:AC100V-240V 50/60Hz òOutput:DC4.25V,250mA MAX òSuitable capacity:200-3000MAH
Solar Charger:Using nature solar to charge about 6 hours for full charge in sunny day. Charge In Cloudy:It can be charge even in cloudy day. Cable Charge:AC adaptor or PC USB charge is available. Small and Light:Only about 40g. It can be cell phone charm. Renewable Battery:It can be rechargeable and more than 500 times charging cycle 1)Small Size: 56mm*37mm*14mm; 2)Weight: About 40g; 3)Solar Cell: Singlecrystal; 4)Battery: NIMH Battery/ above 500 Times; 5)Solar Charge Current: About 30mA(100,000Lx; 6)NIMH Battery Charge Times: 135,000Lux: About 6 hours; 120,000Lux: About 8 hours; 100,000Lux: About 10 hours; 7)Devices charge Time: 12~15Mins; 8)Output Current: 4.5V~5.3V/600mA~250mA; 9)LED Lihgt: While Solar or adaptor charging; 10)AC adaptor Charge Time: About 3 hours; 11)Color:White,Black,Red,Blue; 12)Mini USB connector for MP3/MP4/PMP Devices;Optional tips for iPod and most kind of mobile phones Small Size: 56mm*37mm*14mm Weight: About 40g;
í±High system gains. í±Full duplex and double-end design,external power supply,and convenient installation. í±ALC technology with auto-steady function adopted. í±Provide power indication and uplink and downlink indications. í±With the amplified linear power,the intermodulation and spuriousness are suppressed effectively. í±The reliability conforms to GB6993-86 standards. í±The electromagnetic compatibility conforms to ETS300 609-4 standards. Specification Dual Band (GSM+DCS) Signal Booster Specification TE9018A TE-9018B TE-9018C Frequency range Uplink GSM 890-915 +DCS1710-1785(MHz) Downlink GSM 935-960 + DCS1805-1880(MHz) Gain (dB) GSM Uplink Gpí¦55 Gpí¦65 Gpí¦45 GSM Downlink Gpí¦60 Gpí¦70 Gpí¦50 DCS Uplink Gpí¦50 Gpí¦55 Gpí¦45 DCS Downlink Gpí¦55 Gpí¦60 Gpí¦50 Gain adjustable range MGCí¦30dB Output power(dBmú¬ í¦17 í¦20 í¦17 Pass band ripple GSM í_4dB DCS í_15dB Guard band rejection GSM (BW-60dB)í_42 MHz (BW-70dB)í_45 MHz DCS (BW-60dB)í_104MHz (BW-70dB)í_107 MHz I/O impedance 50ª+/N Connector I/O return loss í_-10dB Noise figure í_-8dB Intermodulation attenuation (Po=13dBm) í_-40dBc Transmission Delay í_0.5ª¦s Ambient temperature -10íµí½50íµ Power supply AC110í½220Ví+10% 45í½55Hz Size 148mmí-106mmí-33mm Reliability To the GB6993-86 standard Electromagnetic compatibility To the ETS300 694-4 standard Function a) Power supply LED denote b) Export power LED denote
Technology features í= Taking use of technology of interferencing superhigh frequency. í= vIntelligence controlling technology taking charge of the power outputting within the scope of 5 meters. í= High effective channel power with rater big semidiameter of interception. í= Effectively making subsections, just interferencing downlink and causing no interception of base station. í= Imported elements: Slow start up design of circuit can avoid the appearance of sparking when turn on or turn off the machine. Furthermore, these elements can maintain the stable operation condition with high intergration. Output port Frequency Average out-putting power Channel out-putting power CDMA 870-880MHz 33dBm 3dBm/30KHz(min) GSM 935-960MHz 33dBm 2dBm/30KHz(min) DCS 1805-1850MHz 33dBm 0dBm/30KHz(min) PHS(or 3G) ú¿1930-1990MHz 33dBm 0dBm/30KHz(min) or 2110-2170MHzú¬ Power supply: AC110V or AC220V Semidiameter of interception:2-50 meter Energy Consumption:33W Dimension: (L*W*H) 233*33*106mm Net Weight:1.5kg
í±High system gains. í±Full duplex and double-end design,external power supply,and convenient installation. í±ALC technology with auto-steady function adopted. í±Provide power indication and uplink and downlink indications. í±With the amplified linear power,the intermodulation and spuriousness are suppressed effectively. í±The reliability conforms to GB6993-86 standards. í±The electromagnetic compatibility conforms to ETS300 609-4 standards. Specification PCS Band Selective Signal Booster Specification TE-9102A-XP TE-9102C-XP Frequency range Uplink :1850-1910 MHz Downlink:1930-1990MHz Gain ( dB) Uplink Gpí¦55 Gpí¦45 Downlink Gpí¦60 Gpí¦50 Gain adjustable range MGCí¦30dB Export power (dBm) í¦17 í¦17 Pass band ripple í_-15dB Guard band rejection í+200k>5dB í+400k>10dB í+600k>20dB í+1M>46dB í+5M>50dB í+10M>52dB I/O impedance 50ª+/N Connector I/O return loss í_-8dB Noise figure í_8dB Intermodulation Attenuation(Po=13dBm) (9KHzí½1GHz)í_-30dBm (1í½12.75GHz)í_-30dBm Transmission Delay í_0.5ª¦s Ambient temperature -10íµí½50íµ Power supply AC110í½220Ví+10% 45í½55Hz Size 228mmí-106mmí-33mm Reliability To the GB6993-86 standard Electromagnetic compatibility To the ETS300 694-4 standard Function a) Power supply LED denote b) Export power LED denote Say The í¦Xí¦ in type means bandwidth be selected
í±High system gains. í±Full duplex and double-end design,external power supply, and convenient installation. í±ALC technology with auto-steady function adopted. í±Provide power indication and uplink and downlink indications. í±With the amplified linear power,the intermodulation and spuriousness are suppressed effectively. í±The reliability conforms to GB6993-86 standards. í±The electromagnetic compatibility conforms to ETS300 609-4 standards. Specification GSM Full Band Signal Booster Specification TE-9102A TE-9102B TE-9102C Frequency range Uplink 890ú¡915MHz Downlink 935ú¡960MHz Gain ( dB) Uplink Gpí¦55dB Gpí¦65dB Gpí¦45dB Downlink Gpí¦60dB Gpí¦70dB Gpí¦50dB Gain adjustable range MGCí¦30dB Export power (Po) í¦23dBm í¦23 dBm í¦20 dBm Pass band ripple í_5dB Guard band rejection ú¿BW-60dBú¬í_42MHz ,ú¿BW-70dBú¬í_45MHz I/O impedance 50ª+/N connector I/O return loss í_-8dB Noise figure í_8dB Intermodulation Attenuation(Po=13dBm) í_-40dBc Transmission Delay í_0.5ª¦s Ambient temperature -10íµí½50íµ Power supply AC110í½220Ví+10% 45í½55Hz Size 148mmí-106mmí-33mm Reliability To the GB6993-86 standard Electromagnetic Compatibility To the ETS300 694-4 standard Function a) Power supply LED denote b) Export power LED denote
Technology features í=Taking use of super-high frequency and mini-power interference technology. High efficiency. í=Effectively making subsections. Just interfering downlink and no interception on the base station. í=Extreme portability. The weight for machine itself and antenna is just 150g. í=Low power consumption. Working time for machine is about 2-3 hours. Supplied power by battery. í=Slow start up design of circuit. These elements can maintain the stable operation condition with high integration. Output port Frequency Average out-putting power Channel out-putting power CDMA 870-880MHz 35dBm 4dBm/30KHz(min) GSM 935-960MHz 35dBm 3dBm/30KHz(min) DCS 1805-1850MHz 33dBm 1dBm/30KHz(min) PHS(or 3G) ú¿1930-1990MHz 33dBm 1dBm/30KHz(min) or 2110-2170MHzú¬ Power supply: AC110V or AC220V Semidiameter of interception:2-50 meter Energy Consumption:36W Dimension: (L*W*H) 210*50*170mm Net Weight:2.5kg Notices í=Be sure to connect all the antenna first before the power supply is switch on. Please do not take off antenna when the machine is working. í=Antenna shall be used vertical to the ground. working more efficiently. í=Please don't put the jammer in the water and fire to avoid using in the bad. Condition of over-wet. over-hot, high voltage and high magnetism. í=If the jammer can not be charged or other unconventionality(i.e. The indicatior light doesn't light up). please contact with the distributor in local place. Any refit and incorrect repair is not allowed. í=Any ruin and disrepair caused by incorrect operation and disassembly will be excluded from the repair with free of charge.
(1) Double Standby double blue tooth, 3.2inch display (2) GSM 850/900/1800/1900 MHz (3) FM/slip unlock technology/auto unlock by infrared when received the call (4) MP3/MP4 play function,2.0 mega pixcelDV record function,Support auto focus； (5) changing song/moving/picture/standby interface by swaying (6) The unique input interface hitting virtual keyboard.To zoom out/zoom in with selected character. Special menu flying put or fly in feeling (7) support JAVA ，support MSN office,PDF and game 2/8GB TF card/ 2 Li Battery/Color Box/ Charger /USB/Cover
Voip phone 1. Standalone operation, no computer needed; 2. Uses broadband cable/xdsl or network connection for high quality voice over ip; 3. Supports sip, h.323 v4, mgcp, iax2, net2phone etc protocol; 4. Large lcd screen display; 5. With single/double rj45 broadband socket; 6. With h.323 proxy server inside; 7. Startup h.245 tunnel quickly; 8. Supports h.245 and q.931 keypad out-band dtmf transfering method; 9. Send and receive incoming caller id with q.931 protocol; 10. Supports calling directly to ip address; 11. Supports e.164 telephone number calling when gatekeeper used; 12. Search the gatekeeper in lan automatically; 13. Supports calling to pstn normal telephone with prepaid card issued by itsp ( net2phone, etalk etc.); 14. Supports pppoe (connect to internet with adsl and cable modem); 15. User can set the phone with standard web browser(internet explorer 6.0) or using telnet software; 16. Online software upgrade with ftp; 17. Supports g.723.15.3k/6.3k g.729, g.711a-law+law voice encoding and decoding arithmetic; 18. Dynamic voice inspection, cng (comfort noise generation) , dynamic voice jitter buffer; 19. According with g.165 16ms echo counteraction; 20. According with itu-t standard tone(dialing tone, busy tone etc.) and dtmf tone generation and inspection; 21. Supports the dialing rule basing on e.164 coding; 22. Up to 112 groups of fast dialing numbers; 23. 40 groups of incoming and outgoing numbers in memory; 24. 16 groups of voice message; 25. Volume of handset adjustable; 26. Volume of speaker adjustable; 27. Voice guide
Dual band gsm&dcs booster Product description We professional manufacturer followings products since 1995: *gsm fullband/band selective signal booster, *cdma fullband/band selective signal booster, *dcs fullband/band selective signal booster, *gsm&dcs dual band signal booster *pcd fullband/band selective signal booster, *wcdma fullband/band selective signal booster Today, we would like to introduce gsm&dcs dual band signal booster: *technical features: 1)high system gains. 2)full duplex and double-end design, external power supply, and convenient installation. 3)alc technology with auto-steady function adopted. 4)provide power indication and uplink and downlink indications. 5)with the amplified linear power, the intermodulation and spuriousness are suppressed effectively. 6)the reliability conforms to gb6993-86 standards. 7)the electromagnetic compatibility conforms to ets300 609-4 standards. Welcome to contact us to know more details or check following parameters Packaging : neutral packaging
Cdma mobile signal booster /repeater Specification te-8050 te-8060 te-8070 Frequency range uplink 824-849 mhz Downlink 869-894 mhz Gain ( db) uplink gp45 db gp55 db gp65 db Downlink gp50 db gp60 db gp70 db Export power (po) 15dbm 15 dbm 15 dbm Pass band ripple 5db 5db 5db Guard band rejection "¿bw-60db42mhz , ¿bw-70db45mhz " I/o impedance 50+/n connector I/o return loss -20db Noise figure 7db Intermodulation attenuation (po=13dbm) -34dbc -34dbc -33dbc Transmission delay 0.58s Ambient temperature -10µ½50µ Power supply ac110½220va10% 45½55hz Size 97ß84ß28mm 97ß84ß28mm 97ß84ß28mm Reliability to the gb6993-86 standard Electromagnetic compatibility to the ets300 694-4 standard Function "a) power supply led denote B) export power led denote" Packing : according to you
Gsm frequency shifting repeater Product description Gsm signal repeater including broad band repeater, band selective repeater; frequency selective repeater; fiber opital repeater; frequency shifting repeater. Today we draw your attention to our gsm frequency shifting repeater. *system 1)frequency range: Uplink 890~915mhz(6m, 19m, 25m are available) Downlink 935~960mhz(6m, 19m, 25m are available) 2)transmission delay:
Wireless repeater--cdma broad band repeater Cdma signal repeater including full band repeater, band selective repeater; frequency selective repeater; fiber opital repeater; frequency shifting repeater. Today we draw your attention to our cdma band selective repeater. Specification: 1)frequency range: Uplink 825~835mhz Downlink 870~880mhz 2)output power: >30dbm 3)gain: >85db 4)noise figure:
Product description Thanks for your attention! There are fine kinds of dz-101p series designed to provent from explode, to be suitable for gas station and other place which need to provent from explode. Today we would like to introduce our signal jammer dz-101p-a. 1. Tx-frequency: (a)tx-frequency:900mhz(870-880mhz&935-960mhz) (b)tx-frequency:1800mhz(1805-1850mhz&1930mhz) Available systerm:gsm, cdma, dcs, pcs and phs 2.Total output power: 5w 3.Jamming radius: 2-35 meters depends on -75dbm 4.Power supply: ac110v or ac220v 5.Antenna:2pcs omni-directional antennas 6.Net weight: 8.5kg 7.Worktime: it can work stably for long time 8.Running temperature: -40 to +55 celsius degree 9.Humidity: 30%-95% Packing: polyfoam and brown carton packing
Telephone pos Telephone pos processing increases sales, saves time, and reduces operating expenses. Here are just a few of the benefits of using telephone pos: (1)can accept cards where it previously was impossible (at home, in office, retail stores, etc.) (2)no second phone line needed and only one land line. (3)reduces risk. Swiping reduces chance of fraudulent or stolen card being used. (4)increased security. Telephone pos terminal processing reduces the amount of cash handle. Specifications (1)high-performance cpu; (2) communication module, support dtmf/bell 202 fsk signal; (3)4m bytes flash; (4)128*64 white backlit lcd display, with yellow-green led backlight; (5)3 tips led for power indication, sms and missed call indication and card using indication; (6)with magnetic card reader, support 2/3 track; (7)support kinds of smart ic cards and memory ic cards, following iso-7816 standard; (8)have 2 psam (purchase secure access module)card slot; (9)support serial port and external printer; (10)power supply: dc 9v adapter; (11)support battery power supply using 3 batteries; (12)two phone interface, one for telephone line , one for extension phone;
Slimmest dual sim mobile tv 1. Gsm 850/900/1800/1900mhz (brand new & unlocked) 2. Super thin: 13.5 mm 3. Dual sim cards dual standby(dual gsm) 4. Tv with recording function 5. Dual camera each is 1.3mpixel 6. 3600mah li-battery 8. Universal usb cable and charger 121*56*13.5mm About 118g with one battery
Cell phone jammer sk-cj01 Phone jammer Specification Jamming area 0.5 meters to 15 meters (depends on signal strength, at the site to be jammed) Cellular systems Output Frequency Cdma 850-895mhz Battery capacity Built-in battery: 4v/1600ma/h Dimension 95mm(w) * 48mm(l) * 22mm(h) Net weight 0.2kg Accessory Charger and car charger 1 antenna Working time 1-2 hours Power consumption 2 watt 95mm(w) * 48mm(l) * 22mm(h)
Can display the numbers of the coming phone Redial function for the last calling Dial the phone number by remote control Can switch automatically between mobile and handfree mirror CPU: Sunsang S3C2440 400MHz FLASH: 64 Mbyte SDRAM: 64 Mbyte LCD: 7'', Transflective TFT 24 bits Colors TSP: Touch Screen Suport Sd: SD/Multimedia Card Slot Button: Menu Power on/sleep Volumn UP, Volumn down with Key Hold function Hidden Reset Switch: Battery switch GPS Receiver: Module SIRF III and Antenna Built in Battery:1100~1600mAH/3.7V Li rechageable battery charging current=750~1000mA Car camera: CVBS in, automatic switch to Car camera screen Audio Record: WAV file format 60s Charging: 5V DC Power Jack AC Adapter:120/230V universal AC/DC adapter Car Adapter:5V DC 2A Temperature: Operating 0íµ to 60íµ Storage:-20íµ to 60íµ O/S: WinCE.Net 4.2 core Vedio player: WMV9, Divx 5.0,4.0,3.11, Xvid and mpeg4, ASF DIVX upto 480**272 Resolutions Audio player: WMA9, MP3 upto 320kbps and WAV Picture Scan: JPG, BMP S/O Configure: Back light/Date Time/ Volume/Power/Sys Info
1.Charge most of the battery for digital digital device 2.Two USB output 3.Exchange plug for worldwide(US or EU or UK or AUS) 4.input:110-240V 5.output:5V1A/5V500mA 6.CE/FCC/UL/RHOS complaint 7.short-circuit protected letí»t you use it very safety 8.LED indicated,when its charging the LED showed red,when the device is full,the LED turned green 9.working condition: a)temperature working condition 0í»D--+60í»C b)Humidity 65(1í+20%)RH c)Atmospheric pressure 86kPa~106kPa Plastic bag or blister packing
1.Use for the car and home;Designed use for charging PDA,cell phone,IPOD,PSP,MP3,MP4,and any potable device was using 5V 2.Different plug including(US or EU or UK or AUS) 3.The light weight makes you easy to take bring ;2 USB for output 4.Stylish surface 5.car input:12V-24V 6.AC input:110V-240V 7.CE/FCC/UL/E-mark certificated 8.short-circuit protected letí»t you use it very safety 9.output:5V1A and 5V500mA 10.LED indicated,when its charging the LED showed red,when the device is full,the LED turned green 11.working condition: a)temperature working condition 0í»D--+60í»C b)Humidity 65(1í+20%)RH c)Atmospheric pressure 86kPa~106kPa Plastic bag or Blister packing
