Find Verified Carbon Suppliers, Manufacturers and Wholesalers

Product Characteristics
Acid proof and corrosion-resistance
Made up of Using high-grade carbon-containing materials and adding acid proof organic compound, it, with low porosity and high bulk density, is so hard to be corroded by acid or alkaline solution.
Proof high temperature, long lifetime
The proved temperature is 350�ºC to the top. Due to its better abrasion resistance compared with traditional rubber products and higher temperature as a result of bond and additive, the product has much longer lifetime.

DATA:


Specifications
Typical Properties
Ash content %
2
Acid resistance %
98
Apparent porosity %
11
Volume density %
1.62
Compressive strength MPa
65
Cold bending strength MPa
20

Carbon Black Marble

pre-baked consumable Carbon Anode made from petroleum coke, and coal tar pitch,through mixing,forming and baking processes,be used as anodes in cells of Primary Aluminum Smelter. Pre-baked Carbon Anodes Produced

by Carbon has the property of lower Ash content Lower Sulfur content,and Higher Compress strength.

CO2 Reactivity Residue can reach above 91%, and Air Reactivity can reach above 96%; the life-span in cells of aluminum electrolysis is 30-33days, with Jiningâ??s anodes the carbon consumption required for producing one-ton primary aluminum will reduce by about 30Kg than using Pre-baked Carbon Anodes produced by other suppliers. Higher thermal shock Resistance;Thermal Exposure:

MCFeCr Cr: 60%min - 65%min, C: 1%, 2% max.
LCFeCr Cr: 60%min - 65%min, C:0.25%, 0.5% max.
LCFeCr Cr: 60%min - 75%min, C: 0.03%, 0.06%, 0.1% max.

Anode Carbon Block
Baked Carbon , Pre- Baked Carbon ScrapBaked Carbon , Pre- Baked Carbon Scrap Anode Scrap is waste product of raw anode. The raw Carbon Anode products after vibration forming shall be inspected one by one according to the appearance inspection standard of raw anode, and the formed blocks that do not meet the appearance inspection standard of raw anode shall be picked out, including cracks, pitted surface, curved surface, bending, deformation and man-made waste products. So we called it , carbon anode scrap . Anode scrap , Anode carbon block . Crushed Anode carbon block . etc....
Carbon block - residual carbon block is the preferred fuel to replace cast
Not the furnace! Smoke free Less ash High heat Tywin, come on
Supply various specifications of residual anode carbon block | anode carbon block | residual carbon block | waste anode block Carbon/Graphite Anode Scrap

pre-baked consumable Carbon Anode made from petroleum , and coal tar pitch,through mixing,forming and baking processes,be used as anodes in cells of Primary Aluminum Smelter. Pre-baked Carbon Anodes Produced

by Carbon has the property of lower Ash content Lower Sulfur content,and Higher Compress strength.

CO2 Reactivity Residue can reach above 91%, and Air Reactivity can reach above 96%; the life-span in cells of aluminum electrolysis is 30-33days, with s anodes the carbon consumption required for producing one-ton primary aluminum will reduce by about 30Kg than using Pre-baked Carbon Anodes produced by other suppliers. Higher thermal shock Resistance;Thermal Exposure:

Product Information:
3K/6K/12K two-way carbon fiber cloth is made of raw material 3K/6K/12K carbon fiber silk, plain weave or twill weave. It has the characteristics of high strength, high modulus, light texture, corrosion resistance and high temperature resistance.

Product Specifications
3K-P180: 180g/m2, 0.25mm, 100-3200mm Width, Plain;
3K-P200: 200g/m2, 0.26mm, 100-3200mm Width, Plain;
3K-P220: 220g/m2, 0.3mm, 100-3200mm Width, Plain;
3K-P240: 240g/m2, 0.32mm, 100-3200mm Width, Plain;
3K-P280: 280g/m2, 0.34mm, 100-3200mm Width, Plain;
3K-T200: 200g/m2, 0.26mm, 100-3200mm Width, Twill;
3K-T220: 220g/m2, 0.3mm, 100-3200mm Width, Twill;
3K-T240: 240g/m2, 0.32mm, 100-3200mm Width, Twill;
3K-T280: 280g/m2, 0.34mm, 100-3200mm Width, Twill;
6K-P280: 280g/m2, 0.36mm, 100-3200mm Width, Plain;
6K-P320: 320g/m2, 0.38mm, 100-3200mm Width, Plain;
6K-P360: 360g/m2, 0.42mm, 100-3200mm Width, Plain;
6K-P400: 400g/m2, 0.48mm, 100-3200mm Width, Plain;
6K-T280: 280g/m2, 0.36mm, 100-3200mm Width, Twill;
6K-T320: 320g/m2, 0.38mm, 100-3200mm Width, Twill;
6K-T360: 360g/m2, 0.42mm, 100-3200mm Width, Twill;
6K-T400: 400g/m2, 0.48mm, 100-3200mm Width, Twill;
12K-P400: 400g/m2, 0.46mm, 100-3200mm Width, Plain;
12K-P480: 480g/m2, 0.52mm, 100-3200mm Width, Plain;
12K-P560: 560g/m2, 0.58mm, 100-3200mm Width, Plain;
12K-T400: 400g/m2, 0.46mm, 100-3200mm Width, Twill;
12K-T480: 480g/m2, 0.52mm, 100-3200mm Width, Twill;
12K-T560: 560g/m2, 0.58mm, 100-3200mm Width, Twill;

Product Features:
1.High strength
2.Light texture
3.Preservative
4.High temperature resistance

Applications:
1.Sports and leisure products: surfboards, water skis, snowboards, paddles, bicycles, sports shoes, fishing rods, rackets, fitness equipment, protective equipment, etc.;
2.Automobile and motorcycle parts: Appearance parts such as automobile surrounds, hoods, lamp eyebrows, grilles, etc., interior parts such as center consoles, gear shifters, steering wheel pedals, etc., motorcycle exhaust pipes, safety helmets, fenders, etc.;
3.Industrial products: engine parts, transmission shafts, pressure vessels, scrapers, computer and other electrical shell parts, protective shells, fire protection equipment, etc.;
4.Medical supplies: medical CT bed boards, prosthetics, brackets, etc.;
5.High-end daily necessities: bags, musical instruments, pen tubes, craft decorations, models, etc.;

Packaging Information:
Carbon fiber fabric is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or kraft paper. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets.

Carbon Black
1. N330
2. N660
3. N550
4. P8242
5. PP1201
6. N220

We can supply Activated Carbon as follows:

Aquanomics unwashed carbons are manufactured under the strict supervision of our skilled and experienced experts. The unwashed carbon has high and effective diffusion properties with a high degree of microporosity. These carbons have a wide application in the liquid phase application and are used for removing undesired color, smell and other impurities. Aquanomics Unwashed Carbons comes in black powdered form.

Aquanomics Granular Carbon is used for water treatment including drinking water, groundwater, service water, wastewater, deodorization and separation of components of flow systems. Aquanomics Granular Carbon has a larger particle size as compared to powdered activated carbon. These granular carbon are preferred for the absorption of gases and vapors as well since their rate of diffusion is faster.

Aquanomics Washed Carbons is a cost-effective means of maintaining the activity of activated carbons. This washed carbon is manufactured by our experienced proficiency, ensuring effective, unhampered and prolonged application. It is used in aqua applications like swimming pool purification, etc and also in the containment of food and beverages, water purification and pharmaceutical applications

We're Coconut shell activated carbon manufacturers from india with different variants of activated carbon

We can supply anode carbon blocks upto 5000MT per month on a very good price.
Specs: F.C 96%min,
Ash 1%max,
V.M 1.5%max,
S 2.5%max,
Moisture 1%max,

Carbon Anode Scrap / Anode Carbon Blocks
Specs: F.C 96%min,
Ash 1%max,
V.M 1.5%max,
S 2.5%max,
Moisture 1%max,
please contact me for pricing and
availability.

Carbon Anode Scrap / Anode Carbon Blocks
Specs: F.C 96%min,
Ash 1%max,
V.M 1.5%max,
S 2.5%max,
Moisture 1%max,
please contact me for pricing and
availability.

Anode carbon blocks, anode carbon butts, carbon scrap,

APPLICATION: Air Gas Phase, water and waste, water treatment, Gold recovery

Carbon black is a material produced by the incomplete combustion of coal and coal tar, vegetable matter, or petroleum products, including fuel oil, fluid catalytic cracking tar, and ethylene cracking. Carbon black is a form of paracrystalline carbon that has a high surface-area-to-volume ratio, albeit lower than that of activated carbon. It has high reinforcement property, small deformation, low calorification, good elasticity and flex stiffness characteristics.
N110: High reinforcing, super abrasion
N115: High reinforcing, super abrasion
N121: High reinforcing, super abrasion, high modulus
N134: High reinforcing
N219: High reinforcing, low modulus, good elongation and resistance to tearing, good flex resistance
N220: High reinforcing, high tear resistance, good processing
N375: medium-high reinforcing, high modules and hardness, smooth surface of extrusion
N539: Medium-high reinforcing, high modulus and hardness, smooth surface of extrusion
N550: Medium-high reinforcing, high modulus and hardness, smooth surface of extrusion
N660: medium-high reinforcing and modulus, good flex resistance, low heat buildup
N762: low reinforcing
N774: semi-reinforcing, good elongation, high resilience, low compressed deformation
N234: High reinforcing, high abrasion, high modulus, good dispersion
N326: Medium-high reinforcing, low modules, good elongation and resistance to tearing, good flex resistance
N330: medium-high reinforcing and modulus, good processing
N339: medium-high reinforcing, high modulus and hardness, good processing
N347: medium-high reinforcing, high modulus and hardness, good processing
N351: medium-high reinforcing, high modulus and hardness, good processing
Applicationï¼?
Carbon black is mainly used as reinforcing filler in tyres and other rubber products during the vulcanization process to improve the tensile strength and wear resistance of styrene-butadiene, such as rubber conveyor belts, rubber hose, Airsprings and other rubber products.

Packing:
20kg/package: 1MT/Pallet
1000kg/package: 1MT/Pallet
Or customized

introduce me, the founder of the foreign trade company pt pratama coco Indonesia which is engaged in the export of commodities, activated carbon, shisha briquettes, bbq, sawdust charcoal and materials coconut charcoal. my capacity is 350 tons in one month.

Carbon Powder derived from Tire Pyrolysis Plant

Selecting low ash low sulphur bituminous ,adopting agglomeration process and well-controlled steam activation. The activated carbons display good hardness and high internal surface area , thus effectively adsorb the organic pollutants with large and small molecules and remove the taste and odor compounds and bear repeated backwashing and resist the abrasion.
The granular activated carbons functioned as both filtration and adsorption mainly treat the surface and ground water source and produce the clean drinking water.

We use the elaborately selected the low-ash and low-sulfur coal as raw material. Advanced grinding and remodeling are adopted to the process, to make sure the product has higher strength and activity. Besides, our unique steam and activization is utilized in the process, so that it have a high specific surface area and optimized pore size, which can absorb color molecules and odor-producing molecules in the solution.