The adsorptive capacity of granular activated carbon (GAC) makes it ideal for removing a variety of contaminants from water, air, liquids and gases. GAC is also an environmentally responsible product that can be reactivated through thermal oxidation and used multiple times for the same application.
Powdered activated carbons (PAC) are defined by the ASTM as particles passing through an 80-mesh sieve (0.177 mm) and smaller. We manufactures many types of powdered activated carbon products, each specifically engineered to provide a unique pore structure and adsorption properties.
Globular activated carbon of its body structure to contain at least one layer of spherical shell made of activated carbon material, spherical shell is spherical core body, can be made of different in spherical shell material of inorganic materials, spherical shell can be up to 10 mm in diameter. Change the traditional with binder forming old technology. Excluding adhesive composition and completely on carbon molecules between the affinity and the special properties of the material itself. Produced by scientific formula. Effectively avoid the pore structure plugging, pore developed products, powerful. In addition, because the fluid flow channel formed between globular activated carbon fluid mechanics performance is good, the fluid pressure drop through the activated carbon layer is small, so it is especially applicable to in activated carbon bed layer stack height of fixed bed gas processing plant. Globular activated carbon adsorption performance is divided into physical adsorption and chemical adsorption. Physical adsorption is caused by activated carbon is porous, so has the huge specific surface area, it has strong adsorption. Globular activated carbon surface can be as high as 500-1000 m2 / g, is conducive to give full play to the performance, the distributed capacitance is generally about 0.25 ~ 0.9 ml/g, BET specific surface area is about 500 ~ 2000 m2 / g.
Deep purification of drinking water,industrial sewage water;used for atomic facilities such as exhaust purification, division and refinig.
Specification:Iodine value,800~1100mg/g,Moisture 5%,Hardness90%,PH6-8/9-11,ash15%,200mesh/8*16mesh/12*40mesh/1-3mm
The use of carburizer in casting can greatly increase the amount of scrap steel, reduce the amount of pig iron, or use no pig iron. The feeding method of furnace smelting should be put into the furnace with waste steel and other materials, and the small dosage can be added to the surface of the molten iron. However, it is important to avoid large quantities of iron and water in order to prevent excessive oxidative effects and insufficient carbon content of casting. The amount of carbon added is determined according to the ratio of other raw materials and carbon content. Different types of cast iron are selected according to the need to choose different types of carbon. The characteristics of the carburizing agent itself choose pure carbon graphitized material, reduce the impurities in pig iron, and the choice of carbon addition agent can reduce the production cost of the casting.
In the process of smelting, the carbon content in the steel can be added to the molten steel, due to the improper loading or loading and the excessive amount of decarburization. The commonly used additive is carbon iron, electrode powder, petroleum coke powder, charcoal powder and coke powder. In converter smelting and high carbon steel, the use of petroleum coke with few impurities is used as a carbon extender. The requirement for the carbon dioxide of the converter steelmaking is high, the ash, volatile and sulfur, phosphorus, nitrogen and other impurities are low, and dry, clean, the particle size is moderate
Origin:-China
Uses:- N330 carbon black is used as reinforcing filler in tire tread compounds, primarily truck
tires, mechanical rubber goods. Offers very good abrasion resistance. Provides good tear
resistance and high tensile strength.
Origin:-China
Uses:- N330 carbon black is used as reinforcing filler in tire tread compounds, primarily truck
tires, mechanical rubber goods. Offers very good abrasion resistance. Provides good tear
resistance and high tensile strength.
Activated carbon decription:
Activated carbon is carbon with highly developed holes.
It offers large specific surface area, strong absorbability and mechanical strength.
Furthermore, it can resist acid, alkali and heat.
It is not only used as an excellent adsorbent, but also as a catalyzer and catalyzer carrier.
Widely used in industrial production, agriculture, environmental protection
There are three kinds of materials activated carbon: Coal and wood and nut shell materials
Coal-base activated carbon includes powdered grade, granular grade and columnar grade.
Activated carbon application
1. Water purification and sewage treatment
2. As catalyst and catalyst carrier in chemical industry...
3. As catalyst and catalyst carrier in chemistry industry.
4. Refine and purification of various gases, precious metals refining and gas mask
5. For industrial tail gas purification, denitration, gas separation, PSA, air drying,
6. Food keeping fresh, gas mask, removing dioxin, accelerant carrier, home decoration,
Package:
25kg into polywoven bag, PE lined.
50kg into poly woven bag, PE lined.
500kg or 1000kg into jumbo bag. (with pallets If required)
Granular Coconut Activated Carbon for Gold Recovery
Granular Coconut Activated Carbon for Gold Recovery
Our Service:
1. Reply to your enquiry in 24 working hours;
2. Experienced staffs answer all your questions in fluent English;
3. Customised design is available. OEM are welcomed.
4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staffs.
C9 hydrocarbon resin is made of C9 fraction,which is widely used in paint,adhesive,inks and rubber tyre. C9 hydrocarbon resin is fully compatible with nature rubber, various kinds of synthetic rubber, such as SBR,BR,CR,NBR,IIR and PE,PP,SIS,SEBS,EVA.
TA5100 is hydrocarbon resin which is suitable for hot-melting adhesives, (including quick packaging adhesives,book binding adhesives, wood adhesives and glue sticks, etc.) They have excellent compatibility with SIS, SBS ,EVA ,natural rubber and many kinds of synthetic rubbers . They provide enhanced performance in hot melt adhesive applications.
Features of TA5100 in Hot Melt Adhesive and Pressure Sensitive Adhesives:
Good open time / set time balance,
Good adhesive ability
Excellent aging stability
Light color
Applications: Hot melt adhesive, pressure sensitive adhesive
Cleaning carbon from intake ports and valves on turbo engines N54,N55 used walnut shell yellow
The walnut shell powder is made from walnut broken shell, It is widely used for the surface cleanness.
Mositure: 5%max
Impurity content: 0.03%max
Mesh size: 8-12mesh, 12-20mesh, 20-30mesh, 30-40mesh, 40-60mesh, 60-80mesh, 80-120mesh
Colour: yellow
Packing: double plastic bag or according to your requirement
Origin:- USA
Uses:- Plastics. Our carbon blacks are widely used in applications such as conductive
packaging, film and sheet, fibers, moldings, pipes and semi-conductive cables.
CAS NO. : 1333-86-4
HS Code : 28030010
Synonym : ACTIVATED CARBON DARCO G-60;ACTIVATED CHARCOAL NORIT;ACTIVATED CHARCOAL NORIT(R);ACETYLENE BLACK;ACETYLENE CARBON BLACK;CARBO ACTIVATUS;CARBON, ACTIVATED;CARBON
Origin : USA
Packing : 25/kgs Bag
Molecular Formula : C
Molecular Weight : 12.01
Appearance : Black Powder
Origin:- USA
Uses:- Carbon Black N326 is recommended to be used in the tread rubber for tires of high strength, low-
heated including all-terrain vehicle tires, it also fits for conveyor belts, airproof products, and other rubber
products of high quality.
Origin:- Germany
Uses:- Carbon Black for Inks, Polymers & Coatings Printex is a carbon black pigment. Used in
general industrial and tinting for solvent- and waterborne coatings. Recommended for
automotive, Industrial and decorative coating industries.
CAS NO. : 1333-86-4
HS Code : 28030010
Synonym : ACTIVATED CARBON DARCO G-60;ACTIVATED CHARCOAL NORIT;ACTIVATED CHARCOAL NORIT(R);ACETYLENE BLACK;ACETYLENE CARBON BLACK;CARBO ACTIVATUS;CARBON, ACTIVATED;CARBON
Origin : Germany
Packing : 25/kgs Bag
Molecular Formula : C
Molecular Weight : 12.01
Appearance : Black Powder
Status : Commercial
