We introduce the new concept that has excellent features will be fit for building construction, building reinforcement, retrofitting and strengthening old structure. UD (Unidirectional) Carbon fiber fabric which is carbon reinforcement that non-woven and features all fibres running in a single, parallel direction. It provides ultimate strength in the direction of the fiber grains. UD carbon fabric 200g, 300g, 600gsm at width from 10cm-100cm. The main property of UD carbon fiber are below: 1. Light weight, easy to construct, and little increasing the weight on constructed based materials. 2. Soft, free to cut, is suitable for a variety of shapes structures, and have close adhesion with reinforced concrete surface. 3. The thickness is small, so it is easy to overlap. 4. High tensile strength, high flexibility, and have the same effect as to use steel plate reinforcement. 5. Anti-acid and alkali, corrosion resistance, and can be used in any harsh environment. 6. Fabric with Epoxy widely used in water conservancy, water proofing and fire proofing solution. 7. The supporting epoxy resin impregnated adhesive (recommended our company matching epoxy adhesive) have good permeability, the construction is simple and time required is short. 8. Non-toxic, non-irritating odour, living still in construction. 9. Carbon fiber sheet has high tensile strength, which is equivalent 10 - 15 times to ordinary steel. UD Carbon fiber fabric can be mainly applicable in below areas: Building reinforcement, renovation, Fireproofing, waterproofing solution and any other civil construction and retrofitting works.
Carbon Fiber Plate for Reinforcement. We choose the good quality 12K carbon filament, which steadily ensures the plate with high tensile strength and modulus all the time. The tensile strength can reach 2400MPa, tensile modulus can reach 160GPa. Now wrap system is very popular all over the world, because itâ??s obvious strengthening to the structure and easy operation, less time and cost on construction. Besides, our plate has its own advantage compared to other manufacturer, it surface is without release agent that can result in much better bonding with the concrete. Carbon Plate 1.2mm, 1.4mm, 2mm & 3mm thick, 5cm, 10cm, 20cm wide. Carbon Fiber Plate can be applicable in below area: 1. The remedy repair and strengthening of the plate and beam of concrete structures 2. The strengthening of the openings around the wall and plate 3. The strengthening of beams of wooden buildings etc.
Coconut shell activated carbon offers high surface area, extensive micro-porous structure which makes it an exceptional absorbent of molecules that are more difficult to remove. Ash: 4% Max - Moisture Content: 5% Max - Density: 0.5 Gm/cc Max - Min - Mesh Size: 8x16 Packaging Terms : 25 Kgs Bags Quantity Payment Terms : To be discussed with Buyers Looking for buyers from : Worldwide Contact : Sujan Roy
Our stock carbon fiber plates are fabricated with multiple layers of high strength carbon fiber prepreg using a high pressure molding process. All carbon fiber plates are comprised of: Outer Material: 2x2 Twill Carbon Fiber Prepreg Inner Material: 0/90 (Balanced) Unidirectional Carbon Fiber Prepreg Exterior Finish: Matte/Glossy Plates can be cut to size or machined to print via CNC milling or waterjet cutting. Just leave your detail request to us, and pricing will be emailed for approval.
Anode Carbon / Carbon Block Moisture - 3.2 Ash -1.3 Volatile - 0.75 Fixed carbon - 95-97 Sulphur - 2.3 GCV - 7657 Size you requested ?? 50-150mm, 100-200mm or 200-400mm
Range :15 NB UP TO 1200 NB IN SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS Form :Seamless / Erw / Welded in Round & Square . Carbon Steel : ASTM / ASME A 53 GR. A , B ASTM / ASME 106 GR. A , B ,C . API 5L GR. B , API 5L X 42 , X 46 , X 52 , X 60 , X 70. ASTM / ASME A 691 GRA , B ,C Alloy Steel: ASTM / ASME A 335 GRP 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91 ASTM / ASME A 691 GRP1 CR , 1 1/4 CR , 2 1/4 CR , 5 CR , 9CR , 91.
Anode Carbon Scrap, Size: 100-300 mm Fixed Carbon >92% Ash
Carbon black (subtypes are acetylene black, channel black, furnace black, lamp black and thermal black) is a material produced by the incomplete combustion of heavy petroleum products such as FCC tar, coal tar, or ethylene cracking tar. Carbon black is a form of paracrystalline carbon that has a high surface-area-to-volume ratio, albeit lower than that of activated carbon. It is dissimilar to soot in its much higher surface-area-to-volume ratio and significantly lower (negligible and non-bioavailable) polycyclic aromatic hydrocarbon (PAH) content. However, carbon black is widely used as a model compound for diesel soot for diesel oxidation experiments. Carbon black is mainly used as a reinforcing filler in tires and other rubber products. In plastics, paints, and inks, carbon black is used as a color pigment.
Coal Based Activated Carbon Coal based activated carbon originates from coal that has undergone a steam activation process. During activation, millions of pores are created on the surface of the carbon, increasing the total surface area. Coal based carbon has mainly meso-pores and macro-pores and is very popular in gas phase purification, potable water purification, wastewater purification and aquarium/pond water purification applications.
WOOD BASED ACTIVATED CARBON Wood based activated carbon is produced from selected types of wood and sawdust. This type of carbon is produced by either steam or phosphoric acid activation. Most pores in wood based carbon are in the meso and macro pore region which is ideal for decolorization of liquids and water. Wood base carbon is primarily used in surface water and wastewater filters to remove organic impurities and to effectively remove larger molecular structures like MIB (2-Methylisoborneol) and Geosmin. Wood base phosphoric acid activation can yeild carbon with a very high surface area, ranging from 1500-2500 m2/g. The product is available in granular, pelletized, or powder forms.
Coconut shell-based activated carbons are the least dusty. Predominantly microporous, they are well-suited for organic chemical adsorption. Coconut shell-based carbon has the highest hardness compared to other types of activated carbons, which makes it the ideal carbon for water purification.
A Grade, High Quality, As most of its pore structure consists of micropores (more than 80%), coconut shell carbon can efficiently absorb impurities with micropore molecular structure, such as those present in drinking water.
We manufacture a wide variety of activated carbon products that suit different industries depending on their industrial purposes. We have the ability and technically advanced machinery capacity to produce a wide range of activated carbon products varying from millimeters to micron range.
Blood Clot activator Powder: Used for vacuum and non vacuum blood clot activator collection tube.
Activated charcol/carbon Customized packing of Activated charcol Bulk packing of Activated charcol
Our company is engaged in producing and exporting carbon black powder. The sizes have N115 N121 N220 N234 N330 N326 N339 N375 N351 N550 N660 N774 N880 N990. We can also produce depend on customer's requirement. We will provide low price and good service for our customers. If you want to know more details, please contact with me at any time.
Phosphoric acid activated carbon used for sugar decoloring and pharmaceutical impurities removal We have about 15 years experience in food grade and medicinal grade activated carbon, long time cooperation with many lead company in China, now we start to export, welcome to inquiry me at any time we accept customization, and provide sample for test
The carbon black can be used in rubber, plastic and coating. It can be is powder or ganular. The Sizes have N110, N121, N220, N234, N330, N326, N339, N375, N351, N550, N660, N774. If you need, please contact with us at any time.
Weight: 300g/sqm Thickness: 0.167mm Density: 1.8g/cm³ Direction: unidirectional Packing: 100 meters/roll Width: 100mm, 200mm, 300mm, 500mm or to be customized. Flexible High strength High modulus Easy to install Long shelf life Light self weight High toughness Anti high temperature Environmental-friendly Carbon fiber fabric used for shear strengthening, confinement strengthening, flexural strengthening
Weight: 200g/sqm Thickness: 0.111mm Density: 1.8g/cm Direction: unidirectional Packing: 100 meters/roll Width: 100mm, 200mm, 300mm, 500mm or to be customized.
