Water tank imported sus304 2b stainless steel
External shell imported nacre white armor plate
Insulating layer 50mm-60mm polyurethane foamed
Tank diameter 420mm=460mm
Specification 15 18 20 24 30 pieces
Structure outlet holes on sides; electric heater and water inlet and outlet holes and exhaust hole at the lower part
Bracket material bracket made of premium cold roll with plastic spray
Fastening piece stainless steel screw
Seal macromolecule silicone rubber
Glisten obliquity 45¦
Heated temperature 45-95¦
Vacuum tubes borosilicate gla-1500mm
58-1800mm
Features
1. Internationally certified product
2. Reliable, efficient, double-layer glass evacuated tube
3. Copper transition heat pipe for rapid heat transfer
4. Easy plug-in installation
5. Maintenance free
6. Suitable for pressurized water heater system (up to 0.8mpa)
7. Corrosion resistant silver brazed copper condenser
8. All stainless steel frame and dark gray aluminium casing
9. Stable solar conversion throughout the day (tubes passively track the sun)
10. Freezing resistance: -35 c
11. Stagnation temperature: >220 c
12. The perfect solar collector for domestic solar water heater system and commercial application
13. Comprehensive 10 years limited warranty
Features:
1) power supply: ac 220v +/- 10%
2) power consumption: < 5w
3) accuracy of tested temperature: +/- 2 degressc
4) range of temperature to be tested:0 - 99 degree c
5) power of controllable cycle pump: <500w
6) creepage protection of electric heater:10ma, 0.1s
7) power of electric heater:1, 500w
8) electromagnetic valve: dc 12v, working pressure:
(1)without tank:0.02mpa - 0.8mpa
(2)with tank:0.0mpa
Features:
Tank :
Inner tankfv sus304 food grade stainless steel, thickness 0.4mm
Isolation layer fv high dense polyurethane integral foam, thickness 55mm
Outter shell fv sus304 stainless steel
2) supporting frame:
Stainless steel plate with thickness of 1.2mm
3) vacuum tubes:
Hard borosilicate glass tube, 30mm hailstone resistant
Diameter: 58mm length: 1, 800mm
Temperature resist: -30 ~ 250 degree c
4) echo tilt: 38, 45, 50 degree
5) system pressurized runs without pressure
6) water temperature up to 95 degree c
Capacity:
1) high capacity model:
18 tubes / 252 l
20 tubes / 280 l
2) high temperature model:
20 tubes / 180 l
24 tubes / 216 l
26 tubes / 234 l
30 tubes / 270 l
Solar water heater I
Features:
1) tank:
Inner tankfv sus304 food grade stainless steel, thickness 0.4mm
Isolation layer fv high dense polyurethane integral foam, thickness 55mm
Outter shell fv sus304 stainless steel
2) supporting frame:
Stainless steel plate with thickness of 1.2mm
3) vacuum tubes:
Hard borosilicate glass tube, 30mm hailstone resistant
Diameter: 58mm length: 1, 800mm
Temperature resist: -30 ~ 250 degree c
4) echo tilt: 38, 45, 50 degree
5) system pressurized runs without pressure
6) water temperature up to 95 degree c
Capacity:
1) high capacity model:
18 tubes / 252 l
20 tubes / 280 l
2) high temperature model:
20 tubes / 180 l
24 tubes / 216 l
26 tubes / 234 l
30 tubes / 270 l
Model: UNP-S02 Series
Type: No pressure
Solar Vacuum Tube: 8/10/12/15/18/20/24/30/36
Tube Size: 58*1800 1.95kgs
Tank Capacity: from 80L to 300L
Material: Stainless steel
Bracket: U type and 1.2mm thickness
Product Description
1.Application: Tubular PTC heater for towel drier, electric water heater, ventilator
2.Characteristics
1) self-regulation PTC elements. Heater will not be damaged or get fire even if under the condition without water flow.
2) Less power aging rate. Energy-saving, power will be adjusted automatically by water temperature.
3) Voltage can be designed as client request from 12-265VAC.
4) Housing material can be made as client request like aluminum, stainless steel, cooper, or titanium to suit for different application.
5) Diameter can be ranged from 5-25 mm. Length can be ranged from 10-1200mm. Special requirements can be customized.
Solar water heating (SWH) is heating water by sunlight, using a solar thermal collector. A sun-facing collector heats a working fluid that passes into a storage system for later use. SWH is active (pumped) and passive. They use water only, or both water and a working fluid.
Flange immersion heater is made of seamless stainless steel tube, high-quality Mgo, High Ohm NiGr alloy wire. Flange immersion heater is more heat exchange efficient, that means flange immersion heater could standard 3 to 4 times wattage. Flange immersion heater is made of advanced production equipment and through strict quality test. Characteristic fast temperature rise heating uniformity heating exchange efficiently long-time usage appliance.
Cost-effective solar water heater solutions.
Low maintenance and repair requirements.
Quick and easy installation due to complete pre-assembled components.
Customizing: Development of customer-specific modifications and individual solutions by request.
The tubular electrothermal element (electrothermal tube) is made of magnesium oxide sand with good heat resistance, thermal conductivity and insulation by filling and compacting the holes of spiral electrothermal alloy wires (nickel-chromium and ferrochromium alloy) along the central axis of the tube with metal tubes as the shell (including stainless steel and copper tubes). The ends of the tube are sealed with silica gel and processed by other processes.
Stainless steel tubular heater is cylindrical electrical heating elements with two head. Protected with a stainless steel sheath. Mostly double head heater is used for heating up solids such as injection presses heating plates or various tools, double head heater can also be used for heating up water of gases under certain conditions.The choice of technology will depend on technical specifications required and the application.When you don't know exactly which product you are looking for, we will recommend you the best solution for your needs.Tubular heaters are custom designed in a various shapes to as clientâ??s requirements for direct immersion in liquids such as water, oils, solvents and process solutions, molten materials as well as air and gases.
Millionsun solar forced circulation system (Series C)flexibly integrates flat plate collectors, water tanks and control system, forming a heating system with closed loop forced split circulation, which is applicable to both house hold and large scale hot water projects, such as hospitals, hotels and schools.This system operation Automatic control and operation,safe and convenient.
Millionsunâ??s solar flat plate thermosyphon integrating system is composed of solar flat plate collector, pressurized water tank, bracket, circulation pipe and accessories.Due to thermosyphon principle, the collector absorbs solar energy to heat the water inside, while the thermosyphon circulation inside enables the heated water to flow into and be stored in the water tank.
993 Solar Heaters Suppliers
Short on time? Let Solar Heaters sellers contact you.
