Overview
Products Description
The Composite Bridge Plug is made from composite material and easy to drill out. It is mainly composed of mandrel, rubber, slips, cones, protection bowls, release/start pins, lower sub and so on. The composite bridge plug is mainly used for provisional plugging in oil and gas well, and fracturing construction
Working principle
The opposite power produced by setting tool (wire line or transmitting hydraulic pressure in oil tube) acts on the lower sub, shears the starting dowels and exerts compressive force on rubber through cone. Inside the tension range slips dehisce and inlay the in wall of the casing, rubber expand to the in wall of the casing and seal up it, finish setting. When the tension rises to the shear rating, the starting dowels be sheared and the setting tool separates from the bridge plug, finish releasing. After taking out the setting tool, the frac ball that be put into the well will work hermetically with the head face of the mandrel. The plug can be quickly drilled out under the necessity of the after steps
Drilling out
Recommend the use of special milling tools. Recommend rotation rate: 60~150rpm, bit weight: 5~15kN, viscosity of drilling plug fluid:15~30mPas and minimum cyclic velocity: 36.6m/min, to make sure the debris circulates out. After the preparation is done, start the screw drill and drill slowly into the bridge plug. Ensure continuous drilling speed by applying drilling pressure. The torque added to the drilling tool should not be greater than the recommended value. Excessive drilling pressure increases the friction resistance of the pipe string and results in large pieces of debris which must be salvaged separately.
Specification
Type
DTJ92
DTJ100
DTJ112
DTJ145
Suitable casing size
9.5-13.5lb/fï¼?99.56mm-103.88mmï¼?
13-18 lb/fï¼?108.62mm-114.14mmï¼?
17-23lb/ft 118.62mm-124.26mm
26-32lb/ft 154.78mm-159.42mm
Max OD
3.62" 92mm
3.93 (100mm)
4.4" 112mm
5.68" 144mm
Min ID
1.1" 28mm
1.8 (30mm)
1.5 38mm
1.14" 45mm
Total length
26" 660mm
26" 660mm
26" 660mm
39.4" 1000mm
Working pressure
10000psi 70MPa
10000psi 70MPa
10000psi 70MPa
10000psi ï¼?70MPa
Working temperature
300 150
300 150
300 150
300 150
Seating load
120-130kN
160-180kN
160-180kN
160-180kN
It is a important well completion tool. It's mainly used in complex oil, gas or water well completion engineering to realize downhole packing or plugging, improve well cementation and well completion.
It is used for staged packing of open holes for further operation. The pressure opens the packer's rubber for setting. It mainly consists of central pipe, rubber, open/close valve. The open valve is activated by enough pressure to demanding value, and then set the packer. More pressure shall activate the close valve to close the packer.
2. Structure and work principle
It adopts expanding steel frame rubber as sealing element, it is a permanent external casing packer that setting controlled by Combination valves. It is mainly composed of valve joint, rubber assembly,central tube, pup joint, coupling and so on. During construction, when rubber plug go through valve joint, rod in the sealing inlet hole break off to open the inlet hole. When the rubber plug run to spoiler, start built pressure in casing. Liquid run into open valve from valve joint, when the pressure reached to the design, pin on open valve was cut to realize open the open valve. Liquid go through check valve and pressure limiting valve, run into the cavity between central tube and rubber. Then packer expansion and close to well wall to from seal. When expansion cavity pressure reached to the design of pressure limiting valve pin, pin break off, pressure limiting valve take movement to close the inlet hole in order to realize sealing safety. Wellhead release pressure to 0, open valve self-locking to realize permanently closed. Downhole pressure operation has no influence of packer. In the special pipe string precess, it can run inner pipe tools to set packer in order to realize special well completion(eg: well completion by packer or packer sieve tube).
3. Characteristics
1) Simple operation, no need to change the original operating craft.
2) Better adaptability, being applicable to oil/water well under various different condition.
3) Valve system can effectively protect and exactly control the tools to take setting safely.
4) Big expansion coefficient, small diameter rubber barrel can seal the big diameter well. When70mm packer is used in 7''casing, breakdown pressure can reach 28Mpa.
5) Small residual deformation.
6) It has high temperature resistant level, and can bear big differential pressure, with small residual deformation.
7) Long sealing section, reliable setting.
To order pls confirm:
1.Type of packer
2.Casing size and weight & hole size
3.Temperature & hole depth
4.Connection size and type
1594 Oil Field Machinery Equipments Suppliers
Short on time? Let Oil Field Machinery Equipments sellers contact you.
Hydraulic Tubing Drains for use with deep hole drilling tools, downhole devices and other oil and off shore drilling applications provide an accurate method to equalize the fluid level in tubing strings, without mechanical manipulation.
All Tubing Drains are made from high quality Alloy material and use brass shear screws. Replacement parts for all components are available from stock.
The specifications and main parameters
Working Pressure: 1500psi
Bottom Thread: 1.3/4 , 2 , 2.1/2 , 3 , 3.1/2 , 4
Bottom Connection: Box or Pin, API Tubing or Line Pipe thread.
Material: AISI1045/4130 casting steel or ductile iron
Split Cone Packing (rod sizes): 1 , 1.1/8 , 1.1/4 , 1.1/2 and 1.3/4
POPULA Electrostatic Fume Purifier PF-JD Hotel Restaurant Kitchen High and Low Air Discharge Fume Removal
Product Introduction:
This type of fan is specially used for oil fume purification in the kitchen of hotel, restaurant or canteen. But it is stnctly prohibited to be used for purifying the air that is inflammable, explosive, volatile and corrosive,or black smoke produced by dieselwhile buming.
PRODUCTS INFO:
Type:POPULA Electrostatic oil fume purifier fan PF-JD
Brand:POPULA
Electric Current:AC
Power:120~144 KW
Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV
Frequency: 50/60HZ
Air Volume:2000-60000 CMH
Air Pressure:
The Gas Separator separates free gas from fluid prior to entering pumps and helps avoid costly pump damage.
The Gas Separator was designed to provide a method of allowing gas to separate out of the solution and migrate up the annulus, preventing gas locking of the down-hole pump. They use centrifugal forces to separate the gas from the produced liquids, before they enter the pump. Liquids will be carried through into the pump suction while the separated gases are forced to migrate up the annulus. Using the tool allows gas-free production fluids to be carried into the pump station while the separated gases are forced to migrate up the annulus.
The Beam Gas Down-Hole Separator pump increases efficiency and production.
Features:
1,Gas separation
2,Production increase
3,Prevents gas locking
4,Increases pump rate/ Pump efficiency and pump rate will be increased
1. API Casing float shoe and float collar Descriptions:
Float collar and float shoe(guide shoe) are necessary conventional accessories for down-structure of casing string. float collat and float shoe is a heat-resisting, sealer and drillable tool. it's join easy and replace for guide shoe and casing shoe. it's used to protection casing and production casign, also used to deep well and ultra deep well. it classify ordinary type and self fill-up type according to way of drilling fluid get into.
2. API Casing float shoe and float collar Features:
1) All inner parts are made of easily drillable aluminum alloy
2) The device can be connected directly to same type casing
3) Reliable back-pressure leak proof structure, enable grout or slurry flow with less resistance
4) Valve seat and valve disk can effectively prevent grout from flowing back
5) Hardness of base material is equivalent to API Spec N-80
1.TheTubing Centralizer is designed to be run in the tubing string to keep the tubing centralized which may help in preventing premature wear of the casing and tubing.
2.The Tubing Centralizer can be directly above the pump for the vibration and harmonics dampening effects and other units can be installed further up the tubing string to provide the tubing and casing protection.
3.The Tubing Centralizer has full tubing ID specifications and is available for a large variety of casing sizes and tubing connections
Full onshore and offshore oil field and oil rig equipments. Our products include but not limited to:
Drilling Pressure Control Equipment's
Blowout preventors (BOPs)
Rams and ram packers
Connectors
ESG system
Capping stack
Riser system
Diverters
BOP controls and monitoring systems
Manifold systems
Valves
Drilling Equipment's:
HMI and controls systems
OnTrack system
Drawworks
Equipment
Top drive systems
Vertical pipe handling systems
Horizontal pipe handling systems
Pipe deck crane
Drillfloor pipe handling equipment
Hydraulic roughnecks
Drillfloor tools
Cellar deck equipment
Stab-in connection system
Hydraulic power units
Motion compensation equipment
Drilling derricks
Well intervention packages
Total Drilling Fluids Solutions:
Mud control system
Mud mixing system
Bulk storage and transfer system
Mud treatment system
Low-pressure system
Mud modules
Containerized solutions
Oil-water alarm OWK-2
a professional production, development, sale of power plant dedicated spare parts and accessories processing company. Through more than 21 years of efforts, the majority of customers have been fully recognized.
can offer many spare parts for power plants as below:
DF-Oil-water alarm OWK-2-DF
mechanical seal for pump L270
sealing ring HB4-56J8-22
hydraulic screw pump ACG052N7NVBP
vacuum pump ac P-537
O-ring C8689099
centrifugal pump prices DFB-80-300
oil change pump 125LY-36
pump mechanical seal N0330/2100/K/M/506B
screw pump manufacturer ACG 052K7 NVBP
hydraulic vane pump F3-317667
water pump 125-80-260
Servo valve G771 K202A
impeller 125LY-23
screw pump working HSNH440-46NZ
fluid transfer pump YW50-32-125A
Fixed Bearing Locknut TC-47, 120-1
piston vacuum pump PV29-2R1D-C02
piston pumps 25MCY14-1B
vacuum pump 229v PVH74QIC-RSM-IS-10-C25-31
solenoid directional valve D1VW004CNJW91
chemical pump centrifugal -50-250
mechanical seal parts LTJ-GJ-125A/L
Accumulator gas charging and measuring tool NXQ-AB-160/10-F-Y
vacuum pump sealing gasket P-1264
screw pump working PACG070K7NVB
Oil-water alarm OWK-2
vacum pump air vacuum P-2332
Main steam system electric drain valve J961Y-64 540â?? DN65
OPC solenoid valve SV4-10V-C-0-00
EH Recirculating oil pump F3-V10-IS6S-IC-20
rotary vane vacuum pump F320V12A1C22R
main sealing oil pump KG70KZ/7.5F4
Journal Bearing HZB200-430-02-08
high pressure piston pump PVM141ER09GS02AAA28000000A0A
seals (cylinder diaphragm, packing, valve sealing gasket) 125ZXQ016L13NOERH
oil seal FH240
pump vacuum HSNH800-46NZ
vacuum pump 231v KZ/100WS
mechanical seal rings QG400/300-CW
radial piston pump hydraulic PV292R5DC00
magnetic coupling centrifugal pump 125-80-260
electric centrifugal pump head YCZ65-250A
butterfly valve 125DOF4PB3
mechanical shaft seal 15F4-IC-20
HP ball valve HQ14.51Z
piston pump hydraulic PVH074R01AA10A250000002001AB
piston pump hydraulic PVH074R01ABZDV
grease lubrication pump 125LY-63
hydraulic screw pump DLZB820-R65-2
twin screw pump HSNH280-46NZ
Accumulator bladder for Heavy Railway Wagon Scheduling Unit NXQA63/31.5MPa
screw pump stainless SMH80R42E6.7W21
screw pump working principle HSNH440
radial piston pump PVH098R01AJ30A250000002001AB010
repair coupling HSNH280-43NZ
china hydraulic pump 25SCY14-1B
Gear pump GPA2-16-E-20-R6.3
piston pump parts PVHD74R01AA10A250000001ABO1OA
OPC solenoid valve C9506001
stainless steel butterfly valve 150DSF4PB3
300MW turbine AC lube pump ball bearing 125LY-35-5
centrifugal pump prices YCZ50-25
Oil-water alarm OWK-2
Product Description
The model THY-23A is a portable and intelligent oil quality analyzer.The product can be normally used with Li battery under the system of data processing,low voltage and low power consumption.A 2.8-inch color screen shows operating prompt in English characters of each function that convenient to read various data.Automatic calibration of the analyzer greatly improve the testing efficiency,the analyzer will shut down automatically in no man operation state.Hand- held design is convenient for on-site and wild field use.
Main Functions
Rapid test oil contaminant, water content in 10 seconds
Detecting whether have metal particles in lube oil beyond 60�¯�¿�½?�?�¼m
Determining the new purchased lubricant is qualified or not
Product Advantages:
Connect with PC for querying date.
300 types of oil data in world market for reference.
Automatically save oil data with 4GB ROM.
Automatically form the oil curves with test result.
Rechargeable Li Battery
THY-21CE model lubricant oil quality analyzer.
The product Installs a large-screen monitor to realize operating prompt and Chinese characters of each function, convenient to read various data. It is installed a micro printer and uses a high-precision A / D conversion circuit, so that the analyzer repeatability is better. When the power of battery is low, the buzzer will alarm automatically and prompt. The analyzer has a dual function of DC and AC (DC can work continuous for 28 hours), in no man operation condition will shut down automatically; When AC power work can charge. The analyzer has exquisite appearance, easy to operate, suitable for on-site and field operations.
Product funtions:
Determining the degree of pollution in lubricant within 5 minutes;
Detecting percentage of water content in the lubricant within 3 minutes;
Detecting metal particles beyond 60um;
Determining the new purchased lubricant is qualified or not;
Printing the result after finishing the detecting
Product Advantages:
Maximisation and safe extension of intervals between oil changes.
The early detection and prevention combination of mechanical failure.
Avoidance of unnecessary engine damage resulting from overly used lubricants.
Reduce the number of costly and unnecessary laboratory analysis of oil Samples.
Applications:
For the present THY-21CE oil quality analyzer is applied to various fields such as aerospace, oil field, ports, transport, mine, electricity, metallurgy, chemical industry and engineering plant., etc.
The lightweight Lubricators enable the wireline tool string to be introduced or retrieved from a well bore under pressure. The lubricator can be used singly also can use multiply according to the requirement of the oilfield operation, but the seal control head always be assembled on the top of the lubricator. Single Lubricator is 0.8-3m, the number of lubricator and total length could be decided by operation. Titanium alloy Lubricator is much better quality and lightweight than normal steel materials.
The lightweight Lubricators usually consists of four basic parts: a quick union collar, a male quick union, a lubricator tube, and a female quick union.
1. Length of the Lubricator Riser could be customized according to working condition.
2. Drilling fluid, frac acidizing fluid, oil, gas and water can be working media.
3. Connection end of the Lubricator Riser could be flange or union.
4. Our Lubricator Riser is designed and manufactured according to API 16A.
Product Description
Model THY-158CTM can be applied to various engineering machinery, agricultural machinery and diesel generating set that powered by diesel engine below 300HP.The high-strength transparent barrel is more convenient for observing working condition of filter element.
â?¡.Structural Features
The product is made up of aluminium alloy cover and high-strength transparent barrel;clamp joint structure is convenient for replacing filter element;with good features of removable single barrel,small size,light weight and easy installation ( can be installed water level sensor ),the structure of oil mouth are double oil inlet / oil outlet.
.Technical Specs
Size: 140 x 134 x 304 (mm)
Inside diameter of oil hoses: â??10
Rated flux: 0~6 L/min
Net Weight: 1.8 Kg
Rated Pressure:0.4 Mpa
Filter element & No. : C0715ADLR x 1
Size of Screw thread : M14 x 1.5
Accessories: 2 sets ( Articulated Joint,Gaskets,Bolts,Nuts )
Application
Model THY-210G can be applied to various engineering machinery and agricultural machinery powered by diesel engine below 400HP.
â?¡.Structural Features
The product is made up of aluminium alloy cover and high-strength transparent cylinder,with good features of removable single barrel,small size,light weight and easy installation ( can be installed water level sensor ).Beside,the position of double oil inlet / oil outlet can be customized by clientâ??s request.
â?¢.Technical Specs
Size: 140 x 160 x 353 (mm)
Inside diameter of oil hoses: â??10
Rated flux: 0~7.5 L/min
Net Weight: 2Kg
Rated Pressure:0.9 Mpa
Filter element & No. : C1020ADLR x 1
Size of Screw thread : M18 x 1.5
Accessories: 2 sets ( Articulated Joint,Gaskets,Bolts,Nuts )
1594 Oil Field Machinery Equipments Suppliers
Short on time? Let Oil Field Machinery Equipments sellers contact you.
