Flow: 10m3/h
Head: 195m
Power: 13kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province.
The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence.
Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 10m3/h
Head: 210m
Power: 13kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province.
The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence.
Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 10m3/h
Head: 225m
Power: 13kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province.
The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence.
Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 10m3/h
Head: 240m
Power: 15kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province.
The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence.
Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Qj submersible pumps parameters:
Flow range10~500m3/h, lift scope within 5~405m;
Caliber scope 32~203mm, temperature range-15~80° c.
Products overview:
Qj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
Qj submersible pumps use conditions
1. 380 v bias voltage does not exceed + -5% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° c, qjr-temperature hot water pump up to 80 ° c.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water ph 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / l.
Application :
Deep well water
Farm irrigation
Sprinkling irrigation
Urban and rural industry
677 Household Pumps Suppliers
Short on time? Let Household Pumps sellers contact you.
Qj submersible pumps parameters:
Flow range10~500m3/h, lift scope within 5~405m;
Caliber scope 32~203mm, temperature range-15~80° c.
Products overview:
Qj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
Qj submersible pumps use conditions
1. 380 v bias voltage does not exceed + -5% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° c, qjr-temperature hot water pump up to 80 ° c.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water ph 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / l.
Flow: 10m3/h
Head: 40m
Power: 2.2kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380v
Phase: 3 phase/50hz
Color: blue
Qj submersible pumps parameters:
Flow range10~500m3/h, lift scope within 5~405m;
Caliber scope 32~203mm, temperature range-15~80° c.
Products overview:
Qj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
Qj submersible pumps use conditions
1. 380 v bias voltage does not exceed + -5% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° c, qjr-temperature hot water pump up to 80 ° c.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water ph 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / l.
Application :
Deep well water
Farm irrigation
Sprinkling irrigation
Urban and rural industry
Mine supply and drainage.
Flow: 10m3/h
Head: 65m
Power: 4kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380v
Phase: 3 phase/50hz
Color: blue
Qj submersible pumps parameters:
Flow range10~500m3/h, lift scope within 5~405m;
Caliber scope 32~203mm, temperature range-15~80° c.
Products overview:
Qj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
Qj submersible pumps use conditions
1. 380 v bias voltage does not exceed + -5% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° c, qjr-temperature hot water pump up to 80 ° c.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water ph 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / l.
Application :
Deep well water
Farm irrigation
Sprinkling irrigation
Urban and rural industry
Mine supply and drainage.
Flow: 10m3/h
Head: 95m
Power: 5.5kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380v
Phase: 3 phase/50hz
Color: blue
Qj submersible pumps parameters:
Flow range10~500m3/h, lift scope within 5~405m;
Caliber scope 32~203mm, temperature range-15~80° c.
Products overview:
Qj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
Qj submersible pumps use conditions
1. 380 v bias voltage does not exceed + -5% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° c, qjr-temperature hot water pump up to 80 ° c.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water ph 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / l.
Application :
Deep well water
Farm irrigation
Sprinkling irrigation
Urban and rural industry
Mine supply and drainage.
Model
Series 5/a series 5/v series 5/w
Pressure range 1.6~3 bar 70~80 kpa 2~3 bar
Flow range 6~11 l/min 5~11 l/min 800~1200ml
Power 6~ 16 w
Dc voltage 6v 9v 12v 24v brushless
Dimension 86*60*38mm
Weight 286g
Technology features
24 hours working under normal condition
Oil-free
Compact size, high negative pressure, high performance price ratio
Maintenance free
High weight
Low noise level&vibration and lower power consumption
Can be mounted in any plane
Flow can be adjusted (customized)
Adopt customized industrial raw material, it can work with long time in high or low temperature under harsh condition
Application
Electron&electric appliance, food industry (jucier, vacuum preservation etc)
Medical (oxygenators, sputum suction devices, blood pressure meter)
Digital printing equipment
Lab equiment, chemical analysis
Beauty equipment (cupping)
Automation (parts adsorption)
1.Water Pumps-WP
Operating Range
Delivery Size:DN 32 to 150 mm
Capacity:upto 550 m3/hr
Head:upto 100m
Temperature:upto 160° C
Pressure:upto 16 bar
Design:
Horizontal, radial split, volute casing pumps according to DIN 24255 std. with closed impeller, end suction, top centre line discharge. Back pull out design enables to remove the rotor without disturbing the pipelines.
Application:
For handling clean or slightly turbid non-aggressive liquids.
Suitable for pumping condensate, general water supply in agriculture, trade, and industries with favourable NPSH condition.
Materials:
Cast Iron and Bronze.
2.Chemical Process Pump
Operating Range
Delivery Size DN 25 to 200 mm
Capacity:upto 700 m3/hr
Head:upto 180m
Temperature:upto 260° C
Pressure:upto 26 bar
Design:
Horizontal, radial split, volute casing pumps according to ANSI B73-1 specifications with open impeller, end suction, top centre line discharge. Simple external axial adjustment for impeller wear. Back pull out design enables to remove the rotor without disturbing the pipelines. If a spacer coupling is used, the motor does not have to be removed from the base plate. Only four bearing beds cover the entire 32 models. This means that the shafts, sleeves, bearings, and bearing beds are identical in and interchangeable for a large number of pump sizes.
Application:
For handling all chemical process requirements like acids, alkalis, corrosive slurries, hydrocarbons etc.
Suitable for all liquids with/without solids
Materials:
Graded cast iron / WCB/CF8/CF8M (SS-316)/317/317L/CD4MCU/Alloy - 20/Hastalloy - B/ Hastalloy - C etc.,
If you have any inquiry about particular product then feel free to Contact us.
Jiuzhou is a professional company in designing, manufacturing and selling high pressure plunger pump, high pressure washer and some other cleaning machines.
Our company is willing to cooperate with all friends worldwide. Please feel free to contact us for more information.
Other Features:
1) 10m high pressure hose.
2) Long usage life.
3) The motor drives the plunger pump directly.
4) It has the features of mordernly designed, compact structure, small size.
5) convenient to move, high pressure and efficiency, less heat.
Application:
This high pressure washer is mainly used in cleaning and maintenance of all kinds of motor vehicles, engineering vehicles, agricultural machinery.Also it can be used to disinfect and clean of playground, square, exterior walls, doors, windows, hotel, hospital, gym and livestock farm.
Model No.
QL-690
Motor type Three-phase capacitor motor
Power Supply 380V/50HZ
Max Pressure
15Mpa
Working Pressure 1-15Mpa(Adjustable)
Power 4Kw
RPM 1450R/M
Theoretical Flow Rate ¡¨¹ 15L/min
Net weihgt
76kg
Gross Weight 80kg
Size 80¡¨¢35¡¨¢80cm
Move Modes Lift or push
1. Heating mode only, max water outlet temperature is 80¡æ
2. Copeland evi scroll compressor, lcd display controller
3. Installed outdoor (on outdoor wall or in yard or top of house)
4. Needn't electric heater back up
5. Refrigerant:r134a
6. Capacity: 7~24 kw
1, permanent magnet and continuous duty
2, self-priming so pump can be located above water tank
3, runs dry for extended periods of time without damage
4, hold excellent motor keep stable temperature of pump body
Size: 11.3" l x 7" w x 6.7" h
( 288 x 178 x 171 mm)
4, self priming: more than 2 meters
5, port size: hose tail connection 3/4"
6, pressure max: 25psi (1.5bar)
7, diaphragm material: vition
8, check valve made: vition
9, voltage: 12v, 24v dc115v, 220v, 230vac
10, power : on/off switch
11, head of pump: glass fibre
12, body material(dc): glass fibre
13, body material(ac): aluminium
14, liquid of application: water, oil, urea, adblue
The product is cantilever, centrifugal pump. Horizontal, vertical axial open double pump shell structure, lined with carbide or rubber with good wear resistance, corrosion resistance and high reliability. Product structure is reasonable, reliable operation, long life and other characteristics. Especially for high concentrations, strong abrasion conditions.
677 Household Pumps Suppliers
Short on time? Let Household Pumps sellers contact you.
