4.5m ku band parabolic ring focus satellite antenna Electrical specification Model:NS-SEC-450 Frequency, ghz C-band Rx: 3.4~4.2 Tx:5.85~6.725 Ku-band Rx:10.95~12.75 Tx:13.75~14.5 Gain, mid-band, dbi C-band rx:46.5 C band tx:50.3 Ku band rx:56 Ku band tx:57.4 Pol C band:line / circularity Ku band:line Axis ratio 2-port feed C band rx:1.30 C band tx:1.06 4-port feed C band rx:1.09 C band tx:1.06 Standing wave ratio C band rx:1.25 C band tx:1.25 Ku band rx:1.25 Ku band tx:1.25 Yawp temperature (2-port feed) 10degree elevation:c band rx:34degree k ku band rx:52degree k 30degree elevation:c band rx:24degree k ku band rx:41degree k 50degree elevation:c band rx:21degree k ku band rx:37degree k -3dbbwave width, mid-band C band rx:1.21degree C band tx:0.72degree Ku band rx:0.37degree Ku band tx:0.33degree G/t C band:25.9db/degreek ( 30degree lna ) Ku band: 33.3db/degreek ( 70degree lna ) Feed loss, db C band rx:0.2 C band tx:0.2 Ku band rx:0.25 Ku band tx:0.2 Power conten, kw C band tx:5 Ku band tx: 2 Interface C band rx:cpr-229g C band tx:cpr-137g Ku band rx:wr-75 Ku band tx:wr-75 Mechanical specification Size, :4.5 m Type:ring focus Kingpost, :az / el Driver model:manual/electromotion Weight:870 kg Power wastage(electromotion), :0.37kw Rms:Not big than 0.5mm Turn range, Az:Minus or plus 65degree (continuous) El:0~90degree (continuous) Pol:360degree (continuous) Motor drive system, Az travel rate:0.11degree/s ( 0.02degree/s ) El travel rate:0.17degree/s ( 0.02degree/s ) Pol:1degree/s Environment specification Wind speed of work:72km/h flurry97km/h Wind speed of survival: 216km/h Temperature, -40degree ~ + 60degree Relative humidity:, 100% Sun radiation:1135kcal/ h/ m2 Earthquake:0.3g level, 0.15g plumb Ice or snow load:13mm work;25mm survival
We offer 2.4 GHz WiFi antenna, rubber duck, an omnidirectional wireless antenna for Indoor use. These 2.4 GHz WiFi dipole antennas are popular applications include WiFi, WiMax, Bluetooth, WLAN. Applications: 2.4 GHz ISM Band IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n (Pre-N, Draft-N) Applications Public Wireless Hotspot Wireless Video Systems Multipoint and Mobile Applications & Bluetooth â??Description The 2.4 GHz rubber antenna is a compact, omnidirectional high-performance antenna for 2.4 GHz band including WiFi, ZigBee, Bluetooth, Video, ISM, etc. RF Antenna Type Omnidirectional Dipole Rubber Duck 2.4G Wifi Antenna Frequency -MHz 2400-2483Mhz Material Plastic ABS+PC Gain-dBi 2dBi Storage Temperature range -40~+65°C VSWR â?¤1.8 Impedance-Ω 50 ohms Polarization Vertical Max.Power-W 50W Working Temperature range -40~+65°C Color White Connector U.FL or custom Size 10x105mm Cable RG1.13 50mm Lightning protection DC ground The C&T RF Antennas Inc is a Leading Manufacture of Radio Frequency Antenna and RF Coaxial Cable China manufacturer. With over years of experience specialized in Radio Frequency Antenna and RF Coaxial Cable manufacturer/exporter in China, The C&T RF Antennas Inc carries the full range of products include Cellular Phone Antenna, GSM 900/1800 Rubber Antenna, 4G LTE fiberglass Antenna, Car Magnetic Antenna, 2.4G & 5.8G WLAN Antenna, and Coaxial Cable assembly etc.
Product specification Appearance materiaabs Antenna color transparent Appearance size 1550440130mm Input voltage 220v, 50hz Working frequency 58khz Coil resistance 1.5 ohms Pulse time 1.5 milliseconds Alarm mode a variety of sound and light alarm Debug method no debugging, no external host. Working mode one hair one receiving / receiving and receiving Installation of expansion screws or planting adhesive Test distance soft label 1.2-1.4 m. Small hammer hard tag 2.0-2.2 meters Big hammer hard tag 2.2-2.4 m.
The antenna adopts industry leading technologies such as GNSS/INS fusion attitude measurement system, conical scan peak tracking, and carrier attitude calculating and compensation algorithm, etc. All the technologies guarantee the accurate tracking under various conditions. The antenna adopts panel waveguide horn array antenna, having the characteristic of high gain, low height, and high mobility.
In the complex marine environment, weather, sea conditions, temperature, humidity, salt spray, the relative position for antenna and the satellite will make the VSAT communication more difficult. The marine on the move antenna is designed for such harsh environment. The antenna takes a series of brand new technology and solutions such as innovate four axis tracking structures, conical scan peak tracking technology, narrow bandwidth satellite beacon identify technology, high accuracy GNSS/INS fusion attitude course measurement technology, flexible antenna remote monitoring technology, cross sea seamless auto satellite bandwidth switch technology, 100Hz ship attitude, navigator data real time output, and high transparent wave radome.
The antenna adopts industry leading technologies such as GNSS/INS fusion attitude measurement system, conical scan peak tracking, and carrier attitude calculating and compensation algorithm, etc. All the technologies guarantee the accurate tracking under various conditions. The antenna adopts parabolic antenna, having the characteristic of high gain, low height, and high mobility.
The antenna adopts industry leading technologies such as GNSS/INS fusion attitude measurement system, conical scan peak tracking, and carrier attitude calculating and compensation algorithm, etc. All the technologies guarantee the accurate tracking under various conditions. The antenna adopts panel waveguide horn array antenna, having the characteristic of high gain, low height, and high mobility.
VIPA600 is a new launched VIPA virtual image phased array VSAT Antenna which is equivalent to 0.6m with separate receive and transmit structure, , electromagenetism reflector that integrated that integrates shift phase and radiation phase. Phased controll is realised by electromagnetic wave to ensure high gain and wide-angle beam sacnning as well as carrier stable tracking the target satellite in motion.
PA450 is one-dimensional phase scanning phased array antenna. It is eqivalent to 0.45m. It works with 3-40W BUC.
the design of the satpro M80 Maritime Ku-band VSATs adopt all-in-One concept that integrates AUC, , BUC and Modem in the random. The antenna is 3-aixs structure with high reliable aluminum reflector,which guarantee the mechanical performance while reduce the weight of the antenna.the antenna will reduce the communication cost for the small and medium ships.with this all in one system,the management of the ships will improve the work efficiency and the seafacers will access to the high speed internet,email and voip phones at any time in the sea.
the design of the satpro M100 Maritime Ku-band VSATs adopt all-in-One concept that integrates AUC, BUC and Modem in the random. The antenna is 3-aixs structure with high reliable aluminum reflector,which guarantee the mechanical performance while reduce the weight of the antenna.the antenna will reduce the communication cost for the small and medium ships.with this all in one system,the management of the ships will improve the work efficiency and the seafacers will access to the high speed internet,email and voip phones at any time in the sea.
New T-series land low profile horn array panl vsat.lighter structure design with stable locking satellite creates a whole new generation T-series land mobile vsat. The antenna adopts panel waveguide horn array antenna, having the characteristic of high gain, low height, and high mobility. The antenna adopts industry leading technologies such as GNSS/INS fusion attitude measurement system, conical scan peak tracking, and carrier attitude calculating and compensation algorithm, etc. All the technologies guarantee the accurate tracking under various conditions.
UT300 uses two axial stabilized tracking mode, built in GNSS/INS altitude measurement fusion system, therefore to make sure the antenna is always pointing at the satellite in the movement. Flight safety, weather, and communications are critical for small aircraft to keep them safe and operational. SATPRO service meets the need for secure, reliable, and affordable data and voice connectivity during all phases of flight.
SATPRO has successfully passed the AS 9100D Aeronautics and Astronautics quality system certification.SOTM successfully completed the first flight of the AG600 flying with the reported communication tasks. AT450 uses two axial stabilized tracking mode, built in GNSS/INS altitude measurement fusion system, therefore to make sure the antenna is always pointing at the satellite in the movement.
In the complex marine environment, weather, sea conditions, temperature, humidity, salt spray, the relative position for antenna and the satellite will make the VSAT communication more difficult. The marine on the move antenna is designed for such harsh environment. The antenna takes a series of brand new technology and solutions such as innovate four axis tracking structures, conical scan peak tracking technology, narrow bandwidth satellite beacon identify technology, high accuracy GNSS/INS fusion attitude course measurement technology, flexible antenna remote monitoring technology, cross sea seamless auto satellite bandwidth switch technology, 100Hz ship attitude, navigator data real time output, and high transparent wave radome.
NameEAS DR Label for garment Article No.SD2548 SpecificationDimensions45*10mm Packing5000pcs/ctn One Package WeightG.W.3.05kgs / ctn N.W.2.95kgs / ctn MaterialNew ABS ColorWhite /Customized Frequency58KHz Chip3chips
Product Description Closed 30~1000mm Extended 30~5000mm Material Stainless steel, aluminum, alloy, brass or as per request Tolerance +/-0.01mm Length According to customers' requirements Surface finish Polishing, annealing, tempering, coating, anodizing, sand-blast, etc Application The products are widely used in precision apparatus and instruments, electronics, electric appliance, micro-motors, heating equipments, sanitary ware, etc 1. Diameter: 0.25-50mm 2. Thickness: 0.08-1.0mm 3. Tolerence: 0.01-0.02mm 4. Length: According to customer's requests Product Name OEM stainless steel telescopic rod antenna Materials stainless steel, iron, aluminum, brass, copper, steel alloy, etc. Certification ISO:2008, ISO9001 Surface Polished, annealed, tempered Grade SUS304, SUS316, etc. Test According to customer's requests Specification According to customer's requests Used precision instruments and apparatus, electronics, electric appliance and others
5.8G Wireless AP Dual Polarization Omni Rural Micro Base Station wifi 5.8G Wireless AP Dual Polarization Omni Rural Micro Base Station wifi Antenna4900-5850MHz 12dBI Omnidirectional fiberglass Antenna Electrical Specifications Freqrange 4900-5850MHz Gain 12±1 dBi Horizontal Beamwidth 360° Vertical Beamwidth 25 ±5° VSWR 1.5 Ovality 2dB Impedance 50 Ohm Polarization Vertical+Level Max.Power 100W Connector 2*N -K Lightning Protection DC ground Mechanical Specifications Dimension(mm) 74*740 Weight(KG) 2.66 Material CU 4900-5850MHz 12dBI Omnidirectional fiberglass Antenna Electrical Specifications Freqrange 4900-5850MHz Gain 12±1 dBi Horizontal Beamwidth 360° Vertical Beamwidth 25 ±5° VSWR 1.5 Ovality 2dB Impedance 50 Ohm Polarization Vertical+Level Max.Power 100W Connector 2*N -K Lightning Protection DC ground Mechanical Specifications Dimension(mm) 74*740 Weight(KG) 2.66 Material CU 5.8G Wireless AP Dual Polarization Omni Rural Micro Base Station wifi
806-960MHz Double polarized plate Antenna Electrical Specifications Model ANNXIN-8096-12DX65V Freqrange 806-960MHz Gain 12±0.5 dBi Horizontal Beamwidth 65 ±5° Vertical Beamwidth 15 ±3° F/B Ratio 25 dB VSWR 1.5 Impedance 50 Ohm Polarization ±45° Max.Power 100W Connector N-K Lightning Protection DC ground Mechanical Specifications Dimension(mm) 600*280*125 Weight(KG) 3.5
This compact omnidirectional antenna is designed for the frequency of 824-960 MHz (2G, GSM) and 1710-2170 MHz (3G, UMTS) and has a gain of 2dBi. It supports all current/common standards like HSDPA, HSUPA, HSPA, HSPA+, EDGE, GPRS. The antenna will be simply connected to the external antenna connector of your GSM/UMTS device. It has a standard SMA male plug with a flexible 90° joint. Technical Data: Type of Antenna: Omni 3G / GSM Antenna Gain: 2dBi Impedance: 50 Ohm Frequency: 824-960 MHz (2G, GSM) 1710-2170 MHz (3G, GSM) Polarisation: Vertical (Linear) Beamwidth: 360° Horizontal Connector: SMA male Appliance: Indoor Dimensions: 108mm x 10mm Weight: 8g Color: Black
