ASN3-12 air-insulated metal-clad enclosed switchgear is a new mv switchgear on the basis of introducing advanced techniques from foreign, abstracting our experiences in manufacturing the center located switchgear and assembling the world top class numeral controlled equipments. It is major used in 3.6~12kv 3-phase ac50/60hz power system to receive and distribute electrical power. Also it is used to control, protect and monitor the circuit.
1.The surfaces of conductors in the primary circuit are all disposed with vulcanization process. Thus the insulation lay have the characteristic of good attachment, high temperature endurance and even surface comparing with the static electricity process.
2.The frame is made of aluminum-clad zinc board together with rivet nut and high strength bolt.
3. Can be fitted with vn3 series center located high voltage ac vacuum circuit breaker.
4. With the function of manual urgent open switch, the operation is more convenient.
5. Equipped with new ek6 earthing switch, which make the operation convenient and the maintenance easily.
6.All switch operation is proceed with the door of high voltage compartment closed. Also the switchgear has the function of forcible closing the door and the safety is higher. The door can endure the inside fault current.
ASN2-24 air-insulated metal-clad enclosed switchgear is a necessary power distribution equipment in 24kV 3-phase AC50/60Hz power system. It is used in power generator, substation, factory and high building as a equipment of receiving and distributing electrical power. Also it is used to control, protect and monitor the circuit. The switchgear accords with the standard of GB3906, DL/T404 and so on.
1. Busbar is covered with shrinkable insulated material or disposed with epoxy, which make the electrode improved and the body of the switchgear compact.
2. The frame of switchgear is made of top quality aluminum-clad zinc plate through rivets and has characteristic of higher strength, rapider assembled efficiency and more artistic appearance.
3. According to functions the trolley can be divided into circuit breaker trolley, voltage transformer trolley, metering trolley, isolation trolley. The same kind trolleys can be exchanged freely.
4. Can be fitted with VN2 series center located high voltage AC vacuum circuit breaker.
5. There are clapboards between function compartments and individual pressure relief passage.
6. The instrument board is with applicable inclined angle so the operation and observation are more convenient.
7. The instrument compartment is a knock-down module, which not only improve the prettiness and safety of secondary wires but also make the maintenance and overhauling more convenient.
GZS1 Type of indoor metal-clad draw-out switchgear
GZS1 indoor metal-clad draw-out switchgear, developed by Shanghai Dahua Electrical company, is suitable for use in AC. 3.6 ~ 12KV, 50Hz,single-busbar or sectioned single busbar switchgear, mainly used in Elec. generating plants, middle / small power stations, power distributing system of enterprises or industries or substations as Elec. power receiving or distributing equipment or big-power H. voltage motor starting equipment, and so on. The switchgear has functions of control, protection and monitoring
Our main products are rv series worm gear speed reducers, ud(l) planetary cone-disk stepless speed variators, the speed reducers specially designed for engineering polishing machines.The products are widely applied in the sections of foodstuff, packing, ceramics, chemicals, textile, pharmacy, carpentry, plastics and printing, etc. New technology & equipments characterise our products with high quality, smaller volume & elegant shape.
Standard exporting packing
2438 Electric Switches Isolators Suppliers
Short on time? Let Electric Switches Isolators sellers contact you.
400v-40.5kv switchgear
1)6kv-40.5kv raing main unit
2)400v-40.5kv metal clad switchgear
To the future development, with full passion, endless business chanced and development space, we are looking forward to your joining and cooperation to create splendid tomorrow!
J-tech lightsaber 2921
J-tech lightsaber 2921
Ultra lightness has been designed for military/police/engineer/emergency/outdoor activities user.
Small size, light weight is easy to carry. Lanyard system can be bought and attached to it.
Water repellency.
It has defensive bezel in the front, for defense or attacking purposes.
There is a compass in the bottom.
Specifications:
Material: aircraft grade 6061 aluminum.
Power in lumens: 169 lumens (lab notarized)
Lamp type: halogen
Battery type: 3v cr123a lithium x 3 (batteries not included)
Length: 7 1/2 inches
N. Weight: 270 g
Model Number: UIYBPF8858A2400T2485SF
Pass Band:2400 2485MHz
Insertion Loss:1.5dB Ripple:0.5dB
Rejection:45dB DC-2350MHz
45dB 2540~5000MHz
Power:50W
Connector Type: SMA Female
Temperature: 55 85 C
Dimension:88 58 28mm
Military, space and commercial applications.
Electronic Musical Instrument Public Address System Radio Set Biomedical Instrumentation Optical Communication Technology Wireless Infrastructure Microwave Subsystems 2G 3G 4G 5G
GSM CDMA LTE NR
Model Number: UIYWI4893A8T12
Frequency Range:8.0~12.0GHz
Bandwidth: Full
Insertion Loss:0.5dB
Isolation:18dB
VSWR:1.3
Forward Power: 100W
Reverse Power:30W
Connector Type: WR90(BJ100)
Temperature: 40 85C
Dimension:48 93 42mm
Military, space and commercial applications.
Electronic Musical Instrument Public Address System Radio Set Biomedical Instrumentation Optical Communication Technology Wireless Infrastructure Microwave Subsystems 2G 3G 4G 5G
GSM CDMA LTE NR
Model Number: UIYBPF6464A863T870NF
Frequency Range:863 870MHz
Insertion Loss:1.0dB
Ripple:0.2dB
VSWR:1.22
Rejection:55dB DC-833MHz
55dB 903~3000MHz
Power:30W
Connector Type: N-F
product offerings include RF Isolators, RF Circulators, RF Filters, Power Divider / Splitter, Duplexer/, Hybridge Combiner, Coaxial Termination, Coaxial Attenuator, Directional Coupler, Waveguide to Coaxial Adapter.
We offer cost-effective customized solutions in a wide range of RF and Microwave Components and Subsystems.
Advantages:
we offer - ROHS Compliant
we offer - HFSS Simulation
we guarantee - One Year warranty
we guarantee - Fast Delivery
we support - Contract Manufacturing
One important element of good power system design is the proper selection of the distribution equipment. The choice of using either switchgear or switchboards must be based on many different criteria and the design of the power system requires thought be given to each one.
Tungwell's sister company CPEPEC is a vertically integrated manufacturer and fabricator of engineered material solutions for switchgear applications. We manufacture custom material solutions for the following types of equipment:
Medium & High Voltage Circuit Breakers
Pad Mounted (Live & Dead Front) Medium Voltage Switchgear
Metal Clad Medium Voltage Switchgear
Automatic Transfer Switches
Motor Control Switchgear
Metering Equipment
Low Voltage Switchgear
Panelboards
Switchboards
We supply a complete line of insulating components for a broad range of switchgear designs. These components and spare parts can be provided individually or in complete kits for a particular type of switchgear.
1xN mechanical optical switch is a kind of light path control equipment,Can realize multi-channel fiber optic light path switching,In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
Features
Low Insertion Loss
Wide Wavelength Range
TTL level control, easy to control
Imported components, better stability
Drive circuit breakdown self check function
Modular design, convenient for secondary development
Model: RS-EV-AMT-T1S300-01
Warranty:
12 months
Place of Origin:
Guangdong, China
Brand Name:
rawsuns
Certification:
-
Car Model:
M1 and N1 models and M2 and N2 models
Size:
-
Name:
Rawsuns NEW reducer 350Nm 12000rpm parallel shaft gear box ratio 3.043
Maximum input torque:
350Nm
Maximum input speed:
12000r/min
Reduction ratio:
3.043
Lubricating oil volume:
0.8L
Weight:
22.5kg
Recommended application models:
M1 and N1 models, M2 and N2 models no more than 4.5 tons
Recommended application system:
pure electric system, extended-range hybrid power system
PAYMENT:
100% T/T in advance
Model: RS-EV-AMT-T1SF300-01
Warranty:
12 months
Place of Origin:
Guangdong, China
Brand Name:
rawsuns
Certification:
-
Car Model:
M1 and N1 models
Size:
-
Name:
Rawsuns GOOD ratio 9.04 12000rpm ev gearbox reducer for car
Maximum input torque:
350Nm
Maximum input speed:
12000r/min
Reduction ratio:
9.04
Lubricating oil volume:
1L
Weight:
33kg
Recommended application models:
M1 and N1 models
Recommended application system:
pure electric system, extended-range hybrid power system
PAYMENT:
100% T/T in advance
Warranty: 12 months
Place of Origin: Guangdong,China
Brand Name: rawsuns
Model Number: R1SF400
Type: Synchronous Motor
Frequency: 50/60Hz
Phase: Single-phase
Certification: ce
Protect Feature: Waterproof
AC Voltage: 115/120 V
Efficiency: IE 1
Maximum input torque(Nm): 320
Max input speed(r/min): 10000
Reduction ratio: 12.48
Lubricating oil quantity(L): 1.2
Weight(kg): 38
Product Name: ev conversion kit ev motor electric motor
Application: 3-5t Hiace model
2438 Electric Switches Isolators Suppliers
Short on time? Let Electric Switches Isolators sellers contact you.
