Brick style and outputItem production specification Model number Per hour yield Produce period 1. Standard brick 240*115*53mm 51piece 12240piece 15second/time 2. Bread brick 100*200*60 18piece 3240piece 20second/time 3. Hoolow brick 390*190*190 10piece 2400piece 15second/time 4. Multihole brick 240*115*90 24piece 5760piece 15second/time Main technical parameter 1. Actuating shock force 98KN 2. Frequency of shock 6500time/minute 3. Amplitude 15mm 4. Noise 95db(A) 5. Shock time 6second/time 6. overall dimension 4000*2300*2700 7. Installed of complete machine 38KW 8. Weight of complete machine 12T 9. Maximum pressure 10T 10. Give plank size 1180*880*30mm 11. Operation number 12person 12. Use a ground of area 5000.
4KW, 360-400V,3P; Disc 400mm; N.W: 125KG; Water and Vacuum port; Height can be adjusted. Detailed Product Description: Ideal for 1, Smoothing rough surfaces or trowel marks; 2, Repairing damaged concrete slabs; 3, Removing epoxy thin-coats; 4, Grinding sharp grout, mastic, flint and granite; 5, Leveling and smoothing uneven surfaces. Performance 1, The height of handlebar can be adjusted; 2, Vacuum outlet and rubber skirt prevent dust from entering the machine; 3, Circuit breaker protects the machine from motor overload; 4, Mounting discs are connected by rubber pads, to avoid the slight vibration which is caused by wear of gear wheel; 5, Foldable hand makes transportation and storage easy and compact. Inside:high density polyethylene pallet outside: carton.
Ideal for 1, Smoothing rough surfaces or trowel marks; 2, Repairing damaged concrete slabs; 3, Removing epoxy thin-coats; 4, Grinding sharp grout, mastic, flint and granite; 5, Leveling and smoothing uneven surfaces. Performance 1, The height of handlebar can be adjusted; 2, Vacuum outlet and rubber skirt prevent dust from entering the machine; 3, Circuit breaker protects the machine from motor overload; 4, Mounting discs are connected by rubber pads, to avoid the slight vibration which is caused by wear of gear wheel; 5, Foldable hand makes transportation and storage easy and compact. High density polyethylene pallet conform to eport standard.
The characteristics of 4-20 Automatic Brick Making Machine 1.Brick Making Machinehas high speed, high capacity, strong structure, and high efficient. 2.The formed steel and special welding procedure of machine structure makes the machine not easy to sealing-off and break, and especially strong and durable. 3.The adoption of electromagnet electronic control technology of the head downlink could reach accurate impact affect, which can effectively improve the thickness of block as well as improving working speed. 4.The fan-cooled brake motor can get a good effect of quick brake, accurate location and not easy to burn the motor. 5.Brick Making Machine's structure. all of the moulds adopt CO2 protecting welding technique, which makes the machine structure more strong and durable, not easy to break, boom, and can get a longer using life.
Dimension : 2650×2200×2780mm Host machine power: 32 KW Moulding area: 800×600mm Vibration force: 45KN Moulding period:15-25S Mixer model: JS500 The size of the pallet: 850×750×20/25mm General water Consumption: 6T/ day Weight of machine: 8.7T Factory area: 200m2 1 Theoretical workshop area : 150m2 , need about 6-7workers. 2 the office , curing area and stacking area to arrange according your situation. Advanced techonlogy of Concrete cement brick machine QT4-15C Hydraulic pressure Various kinds of blocks: paver blocks, hollow blocks, solid blocks, porous blocks etc. Fully automatic concrete brick machine Configuration of QT4-15C: PLC, batching plant, JS500, belt conveyor, blocks receiver, pallet stacker, forklift, pallet conveyor, pigment mixer etc. High block density : Wtih PLC control. Nude pacing , the QT4-15C block making machine is about 9t . And the dimension of the machine is 2650*2200*2780mm.
Technical characteristics 1. This brick machine is feature of high-speed operation, low abrasion on the sealing of main cylinder, uneasy to damage or leak and low failure rate. 2. The hydraulic system of our brick machine is designed with double-way loop, which adopts professional combined valves to realize the working cycle of filling, air discharge, pressing and de-molding 3. The hydraulic oil tank of our Brick machine is designed with automatic oil heating and cooling systems and oil purification devices, which adopts repeated continuous filtering to ensure the optimal working conditions of hydraulic oil. 4. The feed hopper of our Brick machine is designed with stock level recorder, the open-close door cylinder realizes the automatic open-close of the door so as to ensure the feed averagely to the material box. 5. The cart of automatic material box of our Brick machine adopts positive feed pattern with forced mixing mechanism so as to ensure the average cloth and efficiency. 6. The front of automatic cloth cart is installed with automatic blank-taking device to convey the de-molded bricks to the service position or belt machines. 7. Our Brick machine adopts PLC Siemens controller and man-machine interface, and the whole machine can be operated automatically 8. The molds can be replaced for the production of standard bricks, blink-hole bricks and hollow bricks with different specifications. Main Technical parameters: Type: DYS850 Max work pressure(KN): 8500KN Max oil pressure in the hydraulic system (Mpa): 28.0Mpa Installed capacity(Kw): 74KW Quantity of solid bricks/time 240X115X53mm: 24pcs Quantity of hollow bricks/time 240X115X90mm (hollow rate:25%): 12pcs Automatic setting machine/time(standard brick): 48pcs/time Output/unit/h(based on solid bricks): 5400-5760pcs/h Annual output: 35-38 million purchase. International standard container.
Type: DY1250 Specification: 240, 115, 53mm(standard brick);240, 115, 90mm(perforated brick);390, 190, 190mm(hollow);colorful pavement bricks with various specifications Quantity: 36bricks/time(standard brick) Output: 6480-7640bricks/h Nominal Pressure: 1250T Pressure Head Course: 500/900mm Drive Power: 90KW(main motor automation: Full automatic cycle control on press unit Operating mode: convenient and rapid man machine interface through 10.4 inches touch screen External Size: 4890, 5060, 4690mm Press Mass: 85T. International standard container.
Technical features of Deyi multi-functional hydraulic brick making machine: 1, Hydraulic brick press frame adopts 3-beam 4-column pre-stress force tie bar sleeve structure and optimized finite element stress analysis, with its firm structure capable of supporting a pull of 2000 tons or morel 2. Adopting German Siemens PLC program control, man-machine interface and touch operation. 3, Oil cylinder adopts genuine imported sealing member from German companies, cylinder body is made through double layer alloy casting and forge, interior surface is processed with heat treatment and grinding. 4, Oil cylinder built-in displacement transducer can accurately control brick stuffing, make qualification rate very high and product error only ¡À1mm. Material bin level indicator in feeding bin is adjustable automatically. 5, Hydraulic pressure station is the power source of the entire hydraulic press. This company adopts genuine hydraulic element of hydraulic pump and directional valve produced by German hydraulic manufacturers, applies most advanced hydraulic control principle and valve sensor, making brick press realize pressing system of pre-pressing, finishing pressing and maintaining pressing. Main technical parameters Model: DY 1100 Specification: 240x115x53mm 240x115x90mm 390x190x190mm Molded pieces: 32 standard bricks Production capacity: 5760-7200bricks/h Nominal pressure: 1100T Pressure head position: 500mm Driving power: 75Kw main electromotor Machine weight: 80T Dimensions: 4785x49650x4690mm. International standard container.
1. The hydraulic system of our Brick machine is designed with double loops and double pumps, which adopts professional combined valves to realize the working cycle of filling, air discharge, pressing and de-molding 2. The hydraulic oil tank of our Brick machine is designed with automatic oil heating and cooling systems and oil purification devices, which adopts repeated continuous filtering to ensure the optimal working conditions of hydraulic oil. 3. The cart of automatic material box of our Brick machine adopts positive feed pattern with forced mixing mechanism so as to ensure the average cloth and efficiency. 4. Our Brick machine adopts PLC Siemens controller and man-machine interface, and the whole machine can be operated automatically. 5. The molds can be replaced for the production of standard bricks, blind-hole bricks and hollow bricks with different specifications. Main Technical Parameters Type: DYS430 Max work pressure(KN): 4300KN Max oil pressure in the hydraulic system (Mpa): 29.5Mpa Installed capacity(Kw): 44Kw Quantity of solid bricks/time 240X115X53mm: 12pcs Quantity of hollow bricks/time 240X115X90mm(hollow rate:25%): 6pcs Automatic setting machine/time(standard brick): 48pcs/time Output/unit/h(based on solid bricks): 3600-4300pcs/h Annual output: 24-28 million purchase. International standard container.
Our muti-functional hydraulic brick press is a high-tech patent product researched and developed by our company based on the equipment imported from the United stateds and Germany. Hydraulic brick machine adopts the 3-beam-4-column pre-stress force tie rod sleeve structure and optimized finite element stress analysis, its firm structure can sustain 2000tons. Features: 1. Good quality and competitive price 2. Durable and long service life 3. Nice shape and excellent performance 4. Save power and popular In overseas market 5. Automatic hydraulic brick machine 6. PLC automatic batching 7. High capacity and productivity. National standard.
1. Dy1100 automatic multi-function hydraulic brick machine is our company introduction of absorption of USA and Germany technology research and development a high-tech patent product. 2. DY1100 adopts 3-beam 4-column prestress force tie bar sleeve structure and optimized finite element stress analysis, Enough to withstand two thousand tons of tension. 3. Adopting Germany Siemens PLC program control, human-machine interface and touch operation. 4. Oil cylinder seals all adopts Germany original parts, cylinder body is forged with double alloy, internal surface by grinding under heat treatment. 5. Adopting built-in displacement sensor in oil cylinder, which can control brick stuffing, high pass rate, low error (error is only ±1mm. 6. Hydraulic pressure station is the drive source of hydraulic press. Our company adopts original hydraulic pump and directional valve of Germany, making hydraulic brick machine can realize prepressing, die pressing and maintaining pressing. Type : DY1100 block machine Specification : 240*115*65mm(standard bricks) 240*115*90mm(perforated brick) 390*190*190mm(hollow bricks) Colored pavement bricks with various specification Quantity : 32 bricks/time (standard bricks) Output: 5760-7200pcs/h (standard bricks) Nominal pressure : 1100T Pressure Head Course: 500mm Drive power: 75kw(main motor) Automatic full automatic cycle control on press unit Operating convenient and rapid man machine interface through 10.4 inches colorful touch screen Press mass 80t External size 4785*4965*4690mm.
Vibrating Feeder Features and values Reliable and precise feed rate adjustment by speed and stroke. Minimal maintenance and high performance Minimum operating cost Simple packaged feeding solutions Vibrating Feeder Operating principle:Vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign. Through driving the motor, the two eccentric shafts start rotating to produce a linear huge power which forces the feeder to vibrate. Through the vibration, the materials will slip and sling on the funnel, moving forward. When the materials pass the screening part, smaller parts will fall down avoiding the further crushing, so screening purpose can be reached.
Model: QUM-65 Weight kg(lb): 295(650) Dimension mm(in): L1710(68)xW940(37)x H1150(45) Working diameter mm(in): L1570(62)xW750(30) Speed rpm: 140 Engine: Air-cooled,4-cycle,Gasoline Type: Honda GX390: RobinEH41 Max. output kw(hp): 9.6(13): 9.9(13.5) Max. speed rpm: 3600: 3600 Fuel Tank liter(gal): 6.5(1.69): 7.0(1.82).
Main Structures of the Asphalt Mixing Plant: 1. Cold aggregate supply system : Components storage bins and belt feeder , aggregate belt conveyer.Features:The feeding belts are driven by variable frequency electric motors, which feature reliable performance.The cold aggregate feed bin features modular design for easy transportation.We have 3,4,5 storage bins for your choice. 2. Tilted Charging Conveyor Belt Assembly Components :tilted charging conveyor belt, middle filter sieveFeature:gravity middle filter sieve, little dust overfall, prevent larger waste fall into drying drum, be good for reducing heat lost, prevent jamming hot aggregate elevator or vibrator. 3. Drying drum: The drum lined with a 50mm thick insulation (rock wool).Aggregate lifting flights that assist the heat exchange between aggregates and flame are installed inside the dryer drum, which enables the drum dryer to reach maximum heating efficiency.Four friction rollers for smooth drive and evenly distributed forces. 4. Burning system: For the burner , we have fuel burner (light oil, for both light and heavy oil), coal burner or for both fuel and gas use burner, pipelines,oil tank 5. Hot aggregate elevator: Elevated by Single row of chain special structure for outlet will reduce the abrasion and noises. 6. Dust removal system: 1.bag house2. gravity separator (snail shell shaped)3.cyclone separator4.wet scrubber 7. Mixing building: 1.Vibrating Screen2.Hot aggregate hopper3. weighing hopper4.Mixing deviceFeatures:a.Asphalt mixing plant which designed and manufactured adopts european techniques.b.Double-shaft retrograde rotation making the aggregate overturn up and down 15-20S , to ensure the mixture to be mixed well.5.Bitumen spray system 8. Filler supply system: Components Filler elevator, Filler temporary storage bin, spiral conveyor.The outlet of the screw conveyor is installed with a butterfly valve to control the wallop. The filler interim silo is equipped with a pneumatic arching break unit. 9. Pneumatic control systemComponents air compressor, cylinders, valves and air pipe manifold.Reliable FESTO air cylinders and electromagnetic valves are used. 10. Bitumen supply system: Components bitumen discharge vessel,bitumen tank, heat conducting oil boiler, light oil burner, pipe manifolds, pumps and valves.Features:1.Reasonable bitumen pipe arrangement with insulation to reduce heat loss2. Heat conducting oil boiler with automatic control system for independent operation and control. 3.Bitumen tanks with level and temperature indicators 11. Electric control system1) control room: Container pattern structure.2).Box type control cabinet, main electric parts are SIMENS , Schneider, ABB etc. global famous brand.Functions of interlock and secondary protection.Start of large power electric motors at reasonably low voltage.? The operation board configured with manual controlled urgent operation device, digital displays of aggregate scales, filler scales and bitumen scale, digital converters of cold aggregates, temperature displays of key positions and electric current displays of critical components 12. Side Placed Hot Mix Asphalt Silo: 1.The silo is divided into three sections: upper, middle and lower, and two compartments: left and right, for easy transportation and erection.2.Silo is insulated.3.Anti-segregation device is configured inside the silo.4.The bottom of silo and the discharge floodgate are electrically heated.
Main Structures of the Asphalt Mixing Plant 1. Cold Aggregate Supplying System Cold aggregate is weighed and elevated into the drying drum.We have Three-bins and five-bins aggregate batcher. 2. The Burning System.Burner is available for both coal and oil.Customers can choose either freely. If you choose the coal burner, a coal breaker is needed 3. The Drying Drum And Mixing DrumThe drying drum and the mixing drum are integrated design which reduces customers cost. 4. Dust Collecting SystemNormally , The Cyclone dust filter is the basic configuration, And the bag filter and water filter is for optional, if your area has strictly environmental requirement. The dust collecting system can help you to reduce the pollution. 5. ChassisMobile chassis makes transporation and installation more easy. 6. Finished storage binConvenient for finished product transferring. 7. Control systemPLC control and touch screen make the switch between auto operation and manual operation freely.
Main Structures of the Asphalt Mixing Plant 1.Cold Aggregate Supplying System Cold aggregate is weighed and elevated into the drying drum.We have Three-bins and five-bins aggregate batcher. 2.The Burning System.Burner is available for both coal and oil.Customers can choose either freely. f you choose the coal burner, a coal breaker is needed 3.The Drying Drum And Twin-Shaft MixerIntegrated design of batch type drying drum and horizontal twin-shaft mixer enables it to mix thoroughly and produce better quality finished materials. 4. Dust Collecting SystemNormally , The Cyclone dust filter is the basic configuration, And the bag filter and water filter is for optional, if your area has strictly environmental requirement. The dust collecting system can help you to reduce the pollution. 5. ChassisMobile chassis makes transporation and installation more easy. 6. Finished storage binConvenient for finished product transferring. 7. Control systemPLC control and touch screen make the switch between auto operation and manual operation freely.
Main parameters of DHB series asphalt mixing plant: * DHB-40 Drum Asphalt Mixing Plant 1.Production Capacity: 40t/h Under standard condition 2.Fuel Type: Coal or oil 3.Total Power: About 73.9KW Cyclone dust filter 4.Fuel Consumption: 5.5-7kg/t Fuel 5.Volume of Cold Aggregate Storage: 44m3 6.Discharge Temperature: 120-160 7.Drying Drum: 1200mm5000mm8.Control Mode: manual, semi-automatic, automatic. * DHB-60 Drum Asphalt Mixing Plant 1.Production Capacity: 60t/h Under standard condition 2.Fuel Type: Coal or oil 3.Total Power: About 118.7KW Cyclone dust filter 4.Fuel Consumption: 5.5-7kg/t Fuel 5.Volume of Cold Aggregate Storage: 44m3 6.Discharge Temperature: 120-160 7.Drying Drum: 1500mm6500mm 8.Control Mode: manual, semi-automatic, automatic.
We offer mobile asphalt mixing plant in production capacities ranging from 30 t/h to 160 t/h. We can also do OEM.
Technical Parameters of HZS25 Ready Mix Concrete Plant: Capacity: 25 m3/h Mixing Time: 60 S Max Aggregate Size: 60/80 mm Discharging Height: 3800 mm Total Power: 60KW Total Weight: 25Ton Total Dimensions: 15000800012000 mm 1. Mixing system Twin Shaft Concrete Mixer: JS500 Volume: 800L Capacity: 500L Mixing blade: 27 pcs Mixing Speed: 35 r/min Mixer Motor:18.5 kw Weight: 3700kg Dimensions: 303023002680mm 2. Aggregate system 2.1 Aggregate batcher: PLD800 Volume: 22 m3 Capacity: 48m3/h Power: 33 kw Weight: 2300 kg Dimension: 640016003000mm 2.2 Lifting hopper: 1 unit Speed: 0.28 m/s Power of Motor: 5.5 kw 3. Cement system (optional) 3.1 Cement silo: 2units Capacity: 50t2=100t Silo Diameter: 2800 3.2 Cement Screw Feeder: 2units Diameter: 219mm Length: 9m 4. Additive system (optional) Additive silo Capacity: 1m3 Pneumatic Valve: 50 mm Pump: 3kw 5. Water system Motor Power: 3kw Butterfly Valve: 150 mm Capacity: 50m3/h 6. AIR SYSTEM Air Compressor: 1unit Power: 5.5 kw Pressure: 0.7 Mpa Air flew: 0.67 m3/min 7. WEIGHING SYSTEM 7.1 Aggregate Weighing: 1unit Weighing Capacity: 1500kg Precision: 1% 7.2 Cement Weighing: 1unit Weighing Capacity: 300kg Precision: 1% 7.3 Water Weighing: 1unit Weighing Capacity: 150kg Precision: 1% 7.4 Additive Weighing: 1unit Weighing Capacity: 40 kg Precision: 1% 8. Control systeM PLC command and control operation Main electrical components: SCHNEIDER or SIMENSE 17 colorful computer Manuel and Auto Control is freely changeable.
Main Technical Performance and Parameters: Cycle Time(s) Pallet Size (mm) Power (kw) Weight (kg) Machine Specification (mm) 12¡ª18 1080x850x40 36.25 13800 7200x2290x2825 Theoretical Output Table: Type Specification (mm) No./pallet Block/hour Block/8hours Hollow Block 400 200 200 10 2400 19200 Porous brick 240 115 90 24 5760 46080 Standard brick 240 115 53 48 11520 92160 Ground brick 200 100 60 31 5580 44640 1. Super-strong steel structure made of extensive imported original parts, ensuring more stability and reliability for the main machine body. 2. The whole process uses a PLC aptitude control and dialogue system of human-machine interface, easy to analyze the chance signal, ensure the best operation effect. 3. High-efficient and super-strong vibration system, computer-control flow pressure of the hydraulic system, realize vertically synchronous vibration, frequency conversion, and braking, with synthetic output compounded with double vibration sources, thus greatly increase product compactness and mold-box service life. 4. The cloth system adopts semi-closed screen reticular rotational feeding unit to feed materials forcedly, with evenness and even speed, ensuring product intensity. 5. Fitted with special hydraulic loading unit, readily realize mass and automatic production, saving a great deal of human power, maintenance field, and circulating fund investment.
