Steel Gondola Suspended Platform 8.5m/min For Building Facade Cleaning Suspended platform are designed and constructed in modular form,so it could be mounted in any size from 2m to 8m.
Welding of support structure is made of quality steel profiles
Connection of individual parts of structure is made with nuts and bolts in each unit.
Each platform is equipped with wheels for easy movement around construction sites.
Suspended platform provide safer, easier and more efficient work platforms for your workers. They are ideal for plaster, painting, repairing, decoration, cleaning,elevator installing, loading heavy row materials to higher grounds, etc. It is also widely used in the construction works of big-size tank, bridge, dam and chimney.
Steel Gondola Suspended Platform 8.5m/min For Building Facade Cleaning
Suspended platform are designed and constructed in modular form,so it could be
mounted in any size from 2m to 8m.
Welding of support structure is made of quality steel profiles
Connection of individual parts of structure is made with nuts and bolts in each
unit.
Each platform is equipped with wheels for easy movement around construction sites.
Suspended platform provide safer, easier and more efficient work platforms for your
workers. They are ideal for plaster, painting, repairing, decoration, cleaning,
elevator installing, loading heavy row materials to higher grounds, etc. It is also
widely used in the construction works of big-size tank, bridge, dam and chimney.
Scaffolding Tube
Use: Scaffolding is a temporary structure used to support people and material in the construction or repair of buildings and other large structures. Material Storage Racks, Pallets, Hydraulic Platforms, Trusses, Columns, Purlins, Greenhouse, Stands Towers, Agricultural Equipment
Standard: BS 1139, BS1387-1985, EN 39, EN10219, JIS G 3444
Steel Grade: Q195, Q215, Q235, Q345, S235JR, S275JR, STK400, STK500
Outer Diameter: 27mm, 38mm, 42mm, 48.3mm-48.6mm,50.8mm,60.3mm,63.5mm,76mm,etc...
Wall Thickness: 2.0mm - 4.0mm
Length: 5.8m ,6m, 6.4m,6.5m , 0.3-18m
End: Square cut, Burr removed
Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black
Packing: Plastic plugs in both ends, Wrapped in waterproof paper or PVC sleeve, and sackcloth with several steel strips
Test:Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield
strength, Elongation), Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, Impact Test etc), Exterior Size Inspection.
Mill Test Certificate: EN 10204/3.1B
Coupler
Double Coupler:
Type: British, American, Germany
Size: 48.3 x 48.3
Weight: 1.05 ? 1.48 KG
Swivel Coupler:
Type: British, American, Germany
Size: 48.3 x 48.3
Weight: 1.25 ? 1.75 KG
Standard: BS1139, EN 74
BS 1139
BS 1139 Standard
Chemical Composition:
% by mass, Maximum
C
Si
P
Ni
S
0.20
0.30
0.050
0.009
0.050
Mechanical Properties:
Yield strength, min (MPa)
Tensil strength (MPa)
Elongation in 2 in., min. %
235
340 - 480
24%
BS 1137
BS 1137 Standard
Chemical Composition:
% by mass, Maximum
C
Si
Mn
P
S
0.20
-
1.20
0.045
0.045
Mechanical Properties:
Yield strength, min (MPa)
Tensil strength (MPa)
Elongation in 2 in., min. %
195
320-480
20%
Iq-System scaffold is our flagship items since Hory has been producing it in 2010. Currently supplying it to several countries as 'Japan', 'Thailand', 'Russia', 'Cambodia', 'Vietnam', 'Philippines' as well as 'U.S.A'.
3783 Building Construction Machineries And Equipments Suppliers
Short on time? Let Building Construction Machineries And Equipments sellers contact you.
"Arabian Spar is a leading company is various types of industrial scaffolding manufacture, services & access solutions including Scaffold Pipes, ERW GI & MS Tubes, Steel Board, Metal Board Ladder Beams, Cuplock Scaffolding, Scaffolding Metal Boards, OSHA Proof Tested Scaffolding in Jubail, Dammam, Riyadh Saudi Arabia
Supplier of Industrial Couplers, Swivel Clamps, Grave Lock Couplers, Swivel Beam Clamps, Scaffolding And Associated Accessories. These are appreciated for attributes such as robust construction, precise design and corrosion resistance. Our couplers and clamps are extensively used in refurbishment, power-stations and in power stations which are as Drop Forged Swivel Clamps, Drop Forged Swivel Couplers, Beam Clamp, Joint Pin Couplers, Pressed Steel Clamps, PC Double Couplers Right Angle Double Couplers Right Angle, Grave LOC Coupler (Girder Clamp), Grave Lock Swivel Clamps, Q-Stage Scaffolding, C-Lock Scaffolding, Jack Nuts, PC Pressed Swivel Couplers, Pressed Swivel Coupler,Grave LOC Coupler, LOC Coupler and Scaffolding Top Cup.
Rates are for 1 set of One meter Aluminium Scaffolding & Minimum order of 10 sets
The aluminium tubes used for making the scaffolding tower ladders are made with grade. Alloy 6351 T6 and LM-06 For die casting and outside diameter accurately gauged to fit properly into the metal couplings and to allow complete interchangeability. Fittings and couplings are specially made for the tubes in use & are Satisfactory Quality as to strength & Performance. All Rungs of the scaffold are uniformly spaced.Diagonal bracing is continuous and joined with quick release snap grip (sleeve) coupling. Scaffolding is movable on castor wheels, brakes are provided for safety while in operation. Scaffold legs can be set on either plain or adjustable bases with the provision of jacking of minimum 200mm length Platform is stable at any height. Aluminium scaffolding - modern day solutions for working at a height Easy to transport & Store and quick & simple to assemble Aluminium Scaffold to work at a height safety. Scaffolding is the ideal lightweight, modular platform & tower system for convenient use both for indoors & outdoors. Scaffolds are a safe & easy means to work at height using both hands, standing on a sufficiently large platform.
Features of Aluminium Scaffolding Tower Ladder:
Easy to Transport
Easy to Store
Light Weight
User Friendly
Easy to Assembly & dissemble
Sufficient Large Platform
In Every 6-24 Meters Scaffolding Anti Skid ladders is provided in every 2 meters for convenience
Special straight braces are provide in-between H-frames for extra Safety.& non-tilt able performance
Platform with trapdoor and guard railings is ideal for working at heights.
Maximum load per platform is 270kgs.
Size of Aluminium Scaffolding Tower Ladder:
01. H-frame 1350mm(Width) x 2000mm (Height)
02. Our each H-frame is 6-rungs wherein Other manufacturer provides 5-rungs only
03. Plain & flouted pipe size: Dia -50 x 2mm Thickness with all Anodized. To restrain durability & Light Weight.
04. Platform size: 600mm x 1830mm 02 Noâ??s platforms are provided.
H20 Beams can be used in any kind of formwork where you would use 4x6 lumber. They have a high load capacity throughout their length and are easy to handle.
Product Description
Strong, lightweight and easy to assemble.
H20 Beams can be used in any kind of formwork where you would use 4x6 lumber. They have a high load capacity throughout their length and are easy to handle.
Wooden beam for formwork, consisting of an upper and lower wing and featuring a central section consisting of three layers. The union is designed as a notched and glued joint.
Heads
Fir wood of the highest quality, calibrated with levelled edges and with finger type joints along their length.
Webs
Of a three-layer board with a thickness of 27 mm.
Joint
Notched, finger-type joint between core and wings, throughout their length. High-frequency, high strength gluing.
Anti-humidity treatment
Protective paintwork throughout the beam.
Advantages
Fushi H20 Beam is widely popular for good reason.
Strength and Safety
Dimensional stability and recovery capacity after application of load. High load capacity throughout their length. Protection against humidity, knocks and splintering.
Lightness
Easy handling and quick assembly. Minimum weight.
Economical
Can be used many times. Good ratio between price and uses. Easy storage.
Adaptability
Ideal for use with 25mm formwork board. Supports can be placed at any point. Can be used in any kind of formwork.
LVL Scaffold Board
Introduction To Fushi Wood Lvl Scaffold Plank
FushiPlank is an engineered wood product designed specifically for use as a scaffold plank. It is created by permanently bonding individual veneers together, using adhesive, heat and pressure, with the grain in each layer of veneer running parallel to the grain in the next.The unique process by which it is manufactured disperses the inherent defects found in solid sawn lumber. Natural characteristics such as knots and wane are rearranged to maximize strength and minimize warping and split.
scaffold boards for sale Manufacture
Standards:Â OSHA (Standards & Regulations 29-CFR)1926 Subpart L, Appendix A,BS 2482 Specification for Timber Scaffold Boards,AS1577-1993 scaffold planks Appendix A and Appendix B
Core:Â Pine core and face
Adhesive:Â Phenolic adhesive for exterior use
Section Size:Â 38mm /42mmthickness and 225mm /230mm wide
scaffold boards Moisture Content:Â Maximum 16% moisture
Lengths:Â 1.0 m to 6.0 m length range available
End Sealant:Â Acrylic end sealant for additional moisture protection
Edge Branding:Â Permanent edge branding available at customer request
Finish:Â Un-sanded faces, rounded edges, and painted ends
We offer a number of different plywoods including hardwood faced general purpose plywood, birch plywood ideal for high-end joinery applications, and softwood structural plywood ideal for wall sheathing etc
We can supply Layher Allround scaffolding components: Ringlock Vertical Standard, Ringlock Horizontal Ledger, Ringlock Diagonal Brace, Ringlock Base Collar, Ringlock Steel Plank, Ringlock Steel Toe Board, Ringlock Aluminum Stair, Ringlock Stair Handrail, Ringlock Stage Bracket, Ringlock Adjustable Base Jack. etc. Topscafform co.,ltd, as a leading scaffolding and formwork material OEM manufacturer and exporter in China, has More than 10 years of manufacturing and exporting experience in Ringlock scaffolding, Haki scaffolding, Cuplock scaffolding, Kwikstage scaffolding and an enormous range of Facade scaffolding, Scaffold accessories, Formwork accessories, steel props. To know more about our company,
We can supply Layher Allround scaffolding components:
Ringlock Vertical Standard, Ringlock Horizontal Ledger, Ringlock Diagonal Brace, Ringlock Base Collar, Ringlock Steel Plank, Ringlock Steel Toe Board, Ringlock Aluminum Stair, Ringlock Stair Handrail, Ringlock Stage Bracket, Ringlock Adjustable Base Jack. etc.
Topscafform co.,ltd, as a leading scaffolding and formwork material OEM manufacturer and exporter in China, has More than 10 years of manufacturing and exporting experience in Ringlock scaffolding, Haki scaffolding, Cuplock scaffolding, Kwikstage scaffolding and an enormous range of Facade scaffolding, Scaffold accessories, Formwork accessories, steel props.
To know more about our company, please kindly visit our website:
3/8" high flow couplers, Max. working pressure: 700 bar, these couplers are the standard parts of most hydraulic cylinders (jacks) and other tools.
1/4" ultra-pressure quick couplers, Max. working pressure: 1500 bar.
It can be used for hydraulic torque wrench.
CNPOW straight threaded coupler is made of high-quality carbon structural steel GB45 with reasonable design, advanced technology, high precision and reliable connection quality.
we design the couplers of all specifications based on the strength requirements of HRB500 steel bars. Couplers are applicable to all screw thread steel on grade HRB335,HRB400,HRB500,HRB600.
All the performance indexes have meet meet the requirements of JGJ107-2016 grade I joints tested by National Centre for Quality Supervision and Test of Building Engineering.
It has been widely used in reinforced concrete structural engineering in various industrial and civil buildings.
Especially it is suitable for the rebar mechanical spliciing in buildings and structures requiring higher explosion-proof and shock-proof and it is applied in all kinds of high-rise buildings, roads, bridges, subways, tunnels, power stations, dams and so on
Complete Specification M16-M40,customized can be M12-M50
Special Craft CNPOW Weldable Coupler use annealed raw material and has high quality, good toughness. It also has pass the tensile test and it will not appear the phenomenon of twisting and breaking in the use process, which guarantees the high requirements and high standards of engineering construction.
High Quality Steel CNPOW Weldable Coupler use high quality alloy steel such as 20Cr;Great advantage of reasonable design, advanced technology, high precision, reliable connection quality, good comprehensive mechanical properties, good low temperature performance, good plasticity and weldability make CNPOW Weldable Coupler widely applied in medium and low pressure vessels, oil tanks, vehicles, cranes, mining machinery, power stations, bridges as structures subjected to dynamic loads, mechanical parts, building structures, general metal structures.
Besides,it can be applied under hot rolling or normalizing as well as the various structures in cold areas below - 40 .
ICF bracing is a product designed for use in insulting concrete form(ICF) wall forming applicatins.
The system provides bracing for the wall unit until it has cured and provides the means to plumb and align the wall brace before the concrete set.
Utilizing the system allows the contractor the means to build ICF walls fast and straight, while ensuring a safe work enviroment and providing a professional job site appearance.
Color can be customized.
3783 Building Construction Machineries And Equipments Suppliers
Short on time? Let Building Construction Machineries And Equipments sellers contact you.
