china coal 0001
Tpj-1.5 Paver Machine
Chart and photograph same with product 4
Tpj-1.5 Paver Machinery Introduction
TPJ-1.5 Paver machinery for running way is the paving equipment of synthetic running track with high technical contained manufactured by our company.
The machine is assembled the advanced the technology of Simons frequency conversion step less speed regulation and the hydraulic gear, enhance the automaticity of paving.
Its performance satisfied the sports field?? construction requirement and achieve and achieve the quality and technical specifition.
Accessories:
A potentiometer
Key to the bearing
Wheel
A set of tools
Tpj-1.5 Paver Machinery Parameter
Name Paver machine
Model TPJ-1.5
Actual Width About 1800mm
Paving Width 1500mm
Moving Speed 0.8-6m/min
Paving Capability 200 sq.m./h
Power 8kw
Value adjustment of hydraulic system 8Mpa
Temperature adjustment for electric heating board 120 centigrade
Machine Weight 700 kg
Dimension 2000*1700*720mm
china coal 0001
Stone Brick Paver Laying Machine
Stone Brick Paver Laying Machine Introduction
Stone Brick Paver Laying Machine street / road at one time can be perfectly re street. It also brings directly to the edge. The end result is that the stones are immediately locked tight between the curbs. The street / road in one hit and there is no waste or debris on the road!
1. Better working conditions.
2. Labor saving.
3. High daily production: 300 sqm possible increased.
4. High quality work finished.
5. The edging is made right away, so no cutting work afterwards!
6. Several elements simultaneously processing possible.
7. Partially disabled employees productive again.
8. Short payback.
9. Simple operation.
10. Easy maintenance.
Stone Brick Paver Laying Machine Parameter
No. Item Parameter
1 Oversize 6000x1500x1700mm
2 Gross weight 2000--4000kgs
3 Laying width 2--5.7m
4 Power 2.5---3.5KW
5 Maximum running speed 4m/minutes
6 Minimum running speed 0.3m/minutes
7 Labor required 4--6 person
8 Daily capacity 500-700m2
Description of walk behind concrete power trowel:
Fasta fwt40 walk behind concrete power trowel machines are durable and high efficiency.
They are powered by honda gx160 gasoline engine.The trowel blades are 20 inch length
And made of 2.0mm thickness spring steel. The float trowel pan is made of 3.0mm thickness
Manganese steel and it help the machine have years of high performance. And, our high strength
Steel handle provides maximum comfort and control.
Features of concrete power trowel machine:
1. Independent rotating flywheel, allowing operation in tight corners and in confined spaces.
2. Over-built gearbox assures long service life.
3. Height adjustable handle, assures operator comfort & easy control.
4. Screw control ensures precise blade adjustment.
5. Heavy type clutch make ¡¡ãleave¡¡àand ¡¡àclose¡¡à closely.
6. Aluminum reducer case is not only light, but also has best heat radiating function.
7. Gear is made of pure copper, the worm gear and endless screw design make them have 2 years warranty.
Model: fwt40
Weight: 95kg
Engine: gasoline honda gx160 5.5hp
Blade quantity:4 pcs
Pan quantity: 1 pcs
Working speed: 70-125 rpm
Working diameter: 915mm
Dimension:1820*945*980mm
Package size:1010*1010*340mm
And 410*370*400mm/unit(carton)
Product application:
Fasta fvp219 concrete triple tube roller paver is the most advanced machine used for all kinds pavement, road, square, airport to make the road smoothing. It is specially designed for road construction. It is a combination of the concrete roller paver and concrete vibrators. This unique design helps the machine to reduce large quantity needs of labors and highly improved the working efficiency.
Main features:
1.The concrete vibrator paver is the combination of concrete roller paver and concrete vibrators. Highly
Improved the efficiency of road construction.
2.Customized concrete vibrator paver, the length of the machine will be desighed according to the needs of our customer, 3-8m are all available.
3.50cm-distance between every two vibrators.
4.Meet strict flatness and levelness specifications.
5.Easy operation helps to reduce large quantity needs of labors.
Working width:3-6m
Max insert vibrator depth:300mm
Travel speed:0-3m/min
Dia of roller:219mm
Quantity of roller:2 roller and 1 auger
Roller rotation rate:36rpm
Vibrators detail: 50mm 2m
Add 50cm length, with one concrete vibrator
Material of machine body:iron
Electric motor:380v/50hz
Vibrator motor power:1.5kw
Lifting motor power:1.5kw
Traveling motor power:3kw auger motor:4kw
The track car is used to move molds from one rail to another. cooperate with the ferry car, the track car makes the production line working more smoothly. the amount of the track car of a production line depends on the amount of the rail. You can save your costs by buying more track car and less ferry car.
Ferry car is used to move mold from one rail to another.
Advantages:
1. Highly-automatic: the ferry car can walk automatically. Only one worker can finish the work. Compared to the traditional way, this car is more timesaving and needs less labor intensity.
2. Highly-efficiency: the work can be finished only by pushing the button.
Ferry car is used to move mold from one rail to another.
Advantages:
1. Highly-automatic: the ferry car can walk automatically. Only one worker can finish the work. Compared to the traditional way, this car is more timesaving and needs less labor intensity.
2. Highly-efficiency: the work can be finished only by pushing the button.
Gongyi Xiaoyi Shield Machinery Manufacturing Factory produces automatic dual stacking machine. This machine is available for autoclaved aerated block, foam concrete block, hollow brick and so on. This kind of stacking machine is highly automatic,so it can increase work efficiency. In a word, it is the best choice of en-trucking and stacking.
Cutting machine is designed to cut blocks transversally and longitudinally.
Advantages:
1. Highly-automated: you can control the machine only by pushing the button. Thus one to two workers can complete the work.
2. Attractive appearance: the cutting machine cuts the block from the top to the bottom. As the result, the bricks are angular and flattening. This is the unique characteristic that many other kinds of cutting machines does not have.
3. Flexible: Different clients need different sizes. This point is the problem that many factories want to solve. And our factory has already solved the problem. Our cutting machine can produce bricks of different sizes: 600/400*200*100, 600/400*200*200, 600/400*200*300, 600/400*200*240, 600/400*200*250, 600/400*100*300 and so on. Our machine is also flexible on time. As long as the brick is not dry out, you can cut the block at any time.
Cutting machine is designed to cut blocks transversally and longitudinally.
Advantages:
1. Highly-automated: you can control the machine only by pushing the button. Thus one to two workers can complete the work.
2. Attractive appearance: the cutting machine cuts the block from the top to the bottom. As the result, the bricks are angular and flattening. This is the unique characteristic that many other kinds of cutting machines does not have.
3. Flexible: Different clients need different sizes. This point is the problem that many factories want to solve. And our factory has already solved the problem. Our cutting machine can produce bricks of different sizes: 600/400*200*100, 600/400*200*200, 600/400*200*300, 600/400*200*240, 600/400*200*250, 600/400*100*300 and so on. Our machine is also flexible on time. As long as the brick is not dry out, you can cut the block at any time.
The mold is a basic equipment to make blocks. The production capacity depends on the amount of the mold. The combination of the bottom of the mold and the wall of the mold is flexible. For example, you can produce 100 cubes of bricks by using 50 walls and 100 bottoms. So you can decrease the investment by buying more bottom and less wall. One can also save the cost by using the cement floor as the bottom of the mold.
What is foam mixer?
The foam mixer is uniquely designed to mix foam agent with other materials, such as fly ash, sand, cement, etc. It can ensure the accuracy of the amount of raw materials, and improve efficiency as a result.
What are the advantages of the foam mixer?
1. Raw material: Anything that can be mixed with cement is available to the foam mixer, such as sand, fly ash, cement,stone powder,slag, industrial waste, construction waste etc. So the use of foam mixer is not affected by the inflation of prices. In another word, the cost is fairly low.
2. Economies: the machine only costs a hundred thousand to hundreds of thousands of inequality. So it is suitable for medium and small-sized investors.
3. Environmental: the foam mixer is environmental. Because it does not need still kettle and boiler. As a result, there is no liquid waste and discharge gas.
4. Full automatization: the foam mixer is almost full automatization. Only several workers can complete the work.
What is foam mixer?
The foam mixer is uniquely designed to mix foam agent with other materials, such as fly ash, sand, cement, etc. It can ensure the accuracy of the amount of raw materials, and improve efficiency as a result.
What are the advantages of the foam mixer?
1. Raw material: Anything that can be mixed with cement is available to the foam mixer, such as sand, fly ash, cement,stone powder,slag, industrial waste, construction waste etc. So the use of foam mixer is not affected by the inflation of prices. In another word, the cost is fairly low.
2. Economies: the machine only costs a hundred thousand to hundreds of thousands of inequality. So it is suitable for medium and small-sized investors.
3. Environmental: the foam mixer is environmental. Because it does not need still kettle and boiler. As a result, there is no liquid waste and discharge gas.
4. Full automatization: the foam mixer is almost full automatization. Only several workers can complete the work.
What is foam mixer?
The foam mixer is uniquely designed to mix foam agent with other materials, such as fly ash, sand, cement, etc. It can ensure the accuracy of the amount of raw materials, and improve efficiency as a result.
What are the advantages of the foam mixer?
1. Raw material: Anything that can be mixed with cement is available to the foam mixer, such as sand, fly ash, cement,stone powder,slag, industrial waste, construction waste etc. So the use of foam mixer is not affected by the inflation of prices. In another word, the cost is fairly low.
2. Economies: the machine only costs a hundred thousand to hundreds of thousands of inequality. So it is suitable for medium and small-sized investors.
3. Environmental: the foam mixer is environmental. Because it does not need still kettle and boiler. As a result, there is no liquid waste and discharge gas.
4. Full automatization: the foam mixer is almost full automatization. Only several workers can complete the work.
The push car is designed to push the mold to the bottom of the foam mixer. it is usually fixed on the start of the rail. cooperate with the ferry car, only one worker can control the pouring section.
The push car is designed to push the mold to the bottom of the foam mixer. it is usually fixed on the start of the rail. cooperate with the ferry car, only one worker can control the pouring section.
3785 Building Construction Machineries And Equipments Suppliers
Short on time? Let Building Construction Machineries And Equipments sellers contact you.
