To meet the diverse requirements of our clients, we are offering a wide range of Buff Brown Quartzite. Due to its soothing appearance these are highly popular and are extensively demanded in European countries for Exterior wall cladding. It varies from light brown to dark brown colors along with veins of pink & grey inherent in the same. It is also known as Autumn Brown Quartzite. Buff Brown Quartzite is strong and durable dimensional natural stone which makes it lasting building material for construction. It is used in all kind of applications like internal & external flooring, paving, cladding, skirting, table tops, counter tops, kitchen tops, window sills, tombstones etc.
Product Specifications:
Block Sizes: 270-340 cm length x 160-195 cm width x 50 - 150 cm height
Slab Size: 180 - 340 cm length x 60-195 cm width
Tiles: Cut to Size
Thickness: 20 mm/30 mm/40 mm
Finish: honed/ polished/ leather/flammed/antique/shotblasted/water blasted
Features:
Reliable
Highly durable
Fine finish
Request
Callback
Additional Information:
Pay Mode Terms: L/C (Letter of Credit),D/P,T/T (Bank Transfer),Other
Minimum Order Quantity: 450 Square Feet/Onwards
Port of Dispatch: Mundra Port Pipavav Port
Production Capacity: 1000 Square Meter per Month
Delivery Time: 20 Days on Port
Packaging Details: In Strong Seaworthy Wooden Pallets
Our company is offering an extensive range of Desert Brown Quartzite to meet the needs of our customers. Desert Brown Quartzite is very much popular in interior flooring & cladding due to its appearance like wood flooring & with epoxy treatment it can also be used in countertops & tabletops. Desert Brown Quartzite is hard, strong and durable dimensional natural stone which makes it lasting building material for construction. It is used in all kind of applications like internal & external flooring, paving, cladding, skirting, table tops, counter tops, kitchen tops, window sills, tombstones etc.
Specifications:
Block Sizes: 270-340 cm length x 160-195 cm width x 50 - 150 cm height
Slab Size: 280 - 340 cm length x 160-195 cm width
Tiles: Cut to size
Thickness: 20 mm/30 mm/40 mm
Finish: honed/polished/shotblasted/water blasted
Features:
Even surface
Smooth finish
Various sizes
Request
Callback
Additional Information:
Pay Mode Terms: L/C (Letter of Credit),D/P,T/T (Bank Transfer),Other
Minimum Order Quantity: 450 Sqft/Onwards
Port of Dispatch: Mundra Port Pipavav Port
Production Capacity: 1000 Square Meter per Month
Delivery Time: 20 Days on Port
Packaging Details: In Strong seaworthy wooden Pallets
Being a renowned company, we are offering an extensive range of Golden Brown Quartzite Slab to meet the needs of our clients. All these slabs are easily installed and needs low maintenance. These are very appealing in their appearance and can be availed in varying designs. Furthermore, these tiles are available at market-leading rates.
Product Specifications:
Block Sizes: 270-340 cm length x 160-195 cm width x 50 - 150 cm height
Slab Size: 180 - 340 cm length x 60-195 cm width
Tiles: Cut to Size
Thickness: 20 mm/30 mm/40 mm
Finish: honed/ polished/ leather/flammed/antique/shotblasted/water blasted
Features:
Various sizes
Competitive price
Highly demanded
Request
Callback
Additional Information:
Pay Mode Terms: L/C (Letter of Credit),D/P,T/T (Bank Transfer),Other
Minimum Order Quantity: 450 Square Feet/Onwards
Port of Dispatch: Mundra Port Pipavav Port
Production Capacity: 1000 Square Meter per Month
Delivery Time: 20 Days on Port
Packaging Details: Strong Seaworthy Wooden Crates
Keeping in mind the diverse needs of our clients, we are offering a wide range of Silver Grey Quartzite. Our product Silver Grey Quartzite is a plain Grey colored stone free from any kind of veins & movement in stone. It is also known as Buff Grey Quartzite. Silver Grey Quartzite is widely used for countertops, flooring & dry wall cladding applications.
Product Specifications:
Block Sizes: 270-340 cm Length x 160-195 cm width x 50 - 150 cm Height
Slab Size: 180 - 340 cm Length x 60-195 cm Width
Tiles: Cut to Size
Thickness: 20 mm/30 mm/40 mm
Finish: honed/ polished/ leather/ flammed/ antique/ shotblasted/ water blasted
Request
Callback
Additional Information:
Pay Mode Terms: L/C (Letter of Credit),D/P,T/T (Bank Transfer),Other
Minimum Order Quantity: 450 Square Feet/Onwards
Port of Dispatch: Mundra Port Pipavav Port
Production Capacity: 1000 Square Meter per Month
Delivery Time: 20 Days on Port
Packaging Details: In Strong Seaworthy Wooden Pallets
Minimum Order Quantity 400 Square Feet
Usage Wall Tile, Flooring
Coverage area (application) Kitchen, Bathroom, Bedroom
Surface Finish Polished
Thickness 5-10 mm
As a reputed firm, we are offering an extensive range of Absolute Black Granite. Available in different variations, These garanite products are offered in different sizes and shades as per the choice of our customers. These products are hardened and quenched in state and ensure long lasting service life. Moreover, we are offering these products at affordable rates.
Specifications:
Granite Slabs (in cm):
270-300 cm Length , 160-200 cm Width
Thickness:
2/3/4 cm
Granite Tiles (in cm):
60 x 60, 60 x 40, 60 x 30, 40 x 40, 30 x 30 & Cut to size
Granite Applications:
Flooring, Counter Tops, Vanities as well as exterior applications
Pay Mode Terms: L/C (Letter of Credit),D/P,T/T (Bank Transfer),Other
Port of Dispatch: Chennai Port
Production Capacity: 900 m2 per Month
Delivery Time: 18 Days on Port
Packaging Details: Strong Seaworthy Wooden Crates
124001 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
Minimum Order Quantity 400 Square Feet/Onwards
Color Black Galaxy
Thickness 20 mm
Usage/Application Countertops
Surface Finish Polished
Product Type Slab
Stone Form Big Slab
Size 8 ft x 4 ft
We are a highly acclaimed company that offers a wide range of Black Galaxy Granite . These stone occurs in a deep black tinge and are available in different sizes from small to medium. The color variation of the stone basically is dependent on the distribution of these silver flakes in the stone. The stone occurs naturally with a praiseworthy finishing. These Products are perfect for the decoration of residential areas. Specifications: Granite Slabs (in cm): 270-300 cm Length, 160-200 cm Width Thickness : 2/3/4 cm Granite Tiles (in cm): 60 x 60, 60 x 40, 60 x 30, 40 x 40, 30 x 30 & Cut to size Granite Applications: Flooring, Counter Tops, Vanities as well as exterior applications Granite Finishes: Honed, Polished, Sawn, Sandblasted
Request
Callback
Additional Information:
Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,Other
Port of Dispatch: Chennai Port
Production Capacity: 1000 Square Meter per Month
Delivery Time: 18 Days on Port
Packaging Details: Strong Seaworthy Wooden Crates
DIRECTIONS FOR USE:
- Shake well before using.
- Keep container closed when not in use.
- Set time is the time required before joint can safely be handled.
- Cure time is the time required before joint can be pressure tested.
1. Cut pipe square with saw or hand cutter. Remove all burrs.
2. Check dry fit of pipe and fitting. Pipe should easily go A1/A3 to A1/A2 way into fitting. If pipe bottoms into fitting it should be very snug.
3. Pipe and Fitting should be free of dirt, grease and other foreign materials. If necessary clean pipe and fitting using RPC-WELD Pipe Cleaner. Primer is highly recommended for 3 and larger diameter installation. Apply liberal coat. Primer will start softening surface of pipe and fitting thus ensuring superior joint.
4. Use applicator supplied with the can or suitable applicator at least A1/A2 the size of the pipe diameter.
5. Apply liberal coat of cement to the pipe (equal to depth of fitting) and adequate coat inside of fitting. Make sure there is no uncoated surface. Avoid puddling of cement, it may weaken the joint.
6. Immediately insert pipe into fitting with twisting motion. Cement should be wet. If it has dried recoat both parts. Use sufficient force to ensure pipe bottoms into fitting.
7. Hold joint together for 30-40 seconds to make sure pipe is not pushed out longer time if temperature is low and for larger pipes.
8. Allow 15 minutes set time before handling the assembly and 2 hours cure time if temperature is below 16 C or 60 F Longer cure time may be required for larger pipe and /or temperature is below 16 C or 60 F.
DIRECTIONS FOR USE:
Shake well before using.
Keep container closed when not in use.
Set time is the time required before joint can safely be handled.
Cure time is the time required before joint can be pressure tested.
1. Cut pipe square with saw or hand cutter. Remove all burrs.
2. Check dry fit of pipe and fitting. Pipe should easily go way into fitting. If pipe bottoms into fitting
it should be very snug.
3. Pipe and Fitting should be free of dirt, grease and other foreign materials. If necessary clean pipe and
fitting using RPC-WELD Pipe Cleaner. Primer is highly recommended for 3 and larger diameter installation.
Apply liberal coat. Primer will start softening surface of pipe and fitting thus ensuring superior joint.
4. Use applicator supplied with the can or suitable applicator at least the size of the pipe diameter
5. Apply liberal coat of cement to the pipe (equal to depth of fitting) and adequate coat inside of fitting.
Make sure there is no uncoated surface. Avoid puddling of cement, it may weaken the joint.
6. Immediately insert pipe into fitting with twisting motion. Cement should be wet. If it has dried recoat both parts.
Use sufficient force to ensure pipe bottoms into fitting.
7. Hold joint together for 30-40 seconds to make sure pipe is not pushed out longer time if temperature is low
and for larger pipes.
8. Allow 15 minutes set time before handling the assembly and 2 hours cure time if temperature is below 16 C or
60 F Longer cure time may be required for larger pipe and /or temperature is below 16 C or 6
RPC-WELD PVC solvent cements have passed the following tests performed according to ASTM Standard D2564
Test Pressure
2 hour Hydrostatic Burst Test 400 psi
2 Hour Lap Shear Test 250 psi
16 Hour Lap Shear Test 500 psi
72 Hour Lap Shear Test 900 psi
DIRECTIONS:
Keep container close when not in use
Set time is the time required before joint can safely be handled.
Cure time is the time required before joint can be pressure tested
1. Cut pipe square with saw or hand cutter. Remove all burrs.
2. Check dry fit of pipe and fitting. Pipe should easily go to way into fitting. If pipe bottoms into fitting
it should be very snug.
3. Pipe and Fitting should be free of dirt, grease and other foreign materials. If necessary clean pipe and
fitting using RPC-WELD Pipe Cleaner. Primer is highly recommended for 3 and larger diameter installation.
Apply liberal coat. Primer will start softening surface of pipe and fitting thus ensuring superior joint.
4. Use applicator supplied with the can or suitable applicator at least the size of the pipe diameter
5. Apply liberal coat of cement to the pipe (equal to depth of fitting) and adequate coat inside of fitting.
Make sure there is no uncoated surface. Avoid puddling of cement, it may weaken the joint.
6. Immediately insert pipe into fitting with twisting motion. Cement should be wet. If it has dried recoat both parts.
Use sufficient force to ensure pipe bottoms into fitting.
7. Hold joint together for 30-40 seconds to make sure pipe is not pushed out longer time if temperature is low
and for larger pipes.
8. Allow 15 minutes set time before handling the assembly and 2 hours cure time if temperature is below 60 F.
Longer cure time may be required for larger pipe and /or if temperature is below 60 F.
Do not test with compressed air.
DESCRIPTION: RPC-WELD CPVC is an orange, heavy bodied, high strength, medium setting CPVC solvent cement for all classes and schedule. This cement is manufactured in the India.
APPLICATION: RPC-WELD CPVC is for use on all grade CPVC pipes and fittings. This cement may be used for potable water, irrigation drain, waste, vent, sewer and conduit. This cement can be used for HOT and COLD water applications.
PROPERTIES AND SPECIFICATIONS:
Color Orange
Appearance Liquid
Set TimeFast Medium
Cure Time Consult ASTM schedule
Exceeds ASTM F- 493 specification
Shelf Life 3 years
Raw Materials from U.S.A
AVAILABILITY:
Size Units/case Units/ master
59 ml 24 192
118 ml 24 144
237 ml 24 96
473 ml 12 48
946 ml 6 24
DESCRIPTION: King PVC Solvent is a clear, medium bodied, high strength, fast setting PVC solvent cement for all classes and schedule. This solvent cement is manufactured in the India.
APPLICATION: King PVC Solvent is for use on PVC pipes and fittings. This cement may be used for upto 4â??â?? pipes and fittings with interference fit for potable water, irrigation, drain, waste, vent, sewer and conduit applications.
PROPERTIES AND SPECIFICATIONS:
Color: Clear
Appearance: Liquid
Set Time: Fast
Cure Time: Consult ASTM schedule
Exceeds: ASTM D2564 specification
Shelf Life: 3 years
Raw Materials from U.S.A
AVAILABILITY:
Size Units / case Units/ master
59 ml 24 192
118 ml 24 144
237 ml 24 96
473 ml 12 48
946 ml 6 24
DESCRIPTION : RPC-WELD PVC Solvent is a clear, heavy bodied, high strength, fast setting PVC solvent cement for all classes and schedule. This solvent cement is manufactured in the India.
APPLICATION : RPC-WELD PVC Solvent is for use on PVC pipes and fittings. This cement may be used for all grade pipes and fittings irrespective of diameter with interference fit for potable water, irrigation, drain, waste, vent, sewer and conduit applications.
PROPERTIES AND SPECIFICATIONS:
Color: Gray
Appearance: Liquid
Set Time: Fast
Cure Time: Consult ASTM schedule
Exceeds: ASTM D2564 specification
Shelf Life: 3 years
Raw Materials from U.S.A
AVAILABILITY:
Size Units / case Units/ master
50 ml 24 192
100 ml 24 144
200 ml 24 96
250 ml 24 96
500 ml 12 48
1000 ml 6 24
124001 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
