SYNTHECH SUPER MOTOR OILS SAE 0W-20 / 0W-30 / 0W-40 / 5W-20 / 5W-30 5W-40 / 5W-50 / 10W-30 / 10W-40 / 20W-50 API SN/CJ-4, SN/CF, SM/CF LUBENZ PRO TECH SM series is designed with synthetic base stocks and an advanced technology additive system to provide a very high level of engine protection and performance. It is suitable for higher mileage gasoline and diesel-fueled automobiles and light-duty trucks requiring an API SM/CF specification, where very high viscosity index oils are preferred to provide longer oil drain intervals in modern engines. It provides maximum protection in engines operating under severe conditions, including high-performance turbo-charged, supercharged gasoline, and certain diesel multi-valve fuel-injected systems. for more information, please contact us.
X ENGINE OILS (SAE 10W-30/10W-40/10W-60/15W-40/20W-40/20W-50/20W-60 API SN/CF, SM/CF, SL/CF, SG/CF, SG/CD) ( mineral based) LUBENZ PREMIUM PLUS PEO series are designed with high quality base stocks and advanced technology additive system to provide high level of protection and performance. It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. This product meets the requirements of most car manufacturers and is suitable for use in both gasoline and diesel, naturally aspirated or turbo charged engines, operating in all round seasons and adapted to vehicles equipped with catalytic converters running on unleaded fuels. for more information, please contact us.
MAX POWER SAE 10W-40 / 10W-60 / 20W-50 / 20W-60 API SN, SM/CF, SL/CF, SL) MINERAL BASED) LUBENZ PREMIUM PEO SAE SF/CD series are monograde crankcase lubricants formulated with high quality base stocks and balanced additive system to provide high level of engine protection and performance. It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. This product meets the requirements of most mixed fleet applications and is suitable for general service and commercial engines. for more information, please contact us.
TURBO PLUS DIESEL SAE 10W-30 / 10W-40 / 15W-40 / 20W-50 API CJ-4, CI-4 PLUS, CI-4, CH-4, CG-4, CF-4, CI-4/SM, CI-4/SL, CH-4/SJ (MINERAL BASED DIESEL OIL) LUBENZ SILVER HDEO 5000 series are monograde diesel engine oils formulated with high quality base stocks and selected additives to ensure optimum performance and protection for diesel engines requiring an API CF-4/CF-2 specification. Suitable for heavy duty, high output diesel engines where monograde oils are specified. It provides excellent protection in engines, against high temperature piston deposits, wear, corrosion and foaming under severe operating conditions. fior more information, please contact us.
X DIESEL ENGINE OILS SAE 10W-40 / 15W-40 / 20W-50 / 20W-60 API CJ-4 / CI-4 / CH-4 / CG-4 / CF-4 (MINERAL BASED ENGINE OIL) LUBENZ GLORIA PLUS 15W40 CJ-4 is extra high performance diesel engine oil formulated with highly refined base stocks and advanced technology additives to provide reliable engine performance in the latest emission designs, including those with Exhaust Gas Recirculation (EGR) systems and after treatment systems with Diesel Particulate Filters (DPF) and Diesel Oxidation Catalyst (DOC), as well as satisfying the needs of older engines. It may be used in naturally aspirated and turbocharged diesel & petrol engines and On & Off highway applications, providing excellent protection even under the most strenuous conditions. for more information, please contact us.
X 2-STROKE MOTOR OIL (MINERAL BASED) LUBENZ RESILIENT 4 T 20W50 SM is designed with high quality synthetic blend base stocks and advanced technology additive system to provide high level of protection and performance. It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. This product meets the requirements of most motorcycle manufacturers and is suitable for use in 4 stroke gasoline engines, naturally aspirated or turbo charged engines, operating in all round seasons and adapted to vehicles equipped with catalytic converters running on unleaded fuels. for more information, please contact us.
LUBENZ HOXX PLUS HYDRAULIC OIL HVI ZF range of lubricants are high viscosity index Zinc Free Ashless anti-wear hydraulic fluids formulated with high quality HVI base stocks and advanced very low ash anti-wear additive technology. They are designed to work efficiently in hydraulic & fluid power transmission systems, subjected to wide temperature ranges operating under severe conditions. These oils are available in ISO viscosity grades from 15 to 150. Moreover, they are also designed to work in systems where high hydrolytic stability is required, even in presence of high moisture content in hydraulic systems. for more information, please contact us.
LUBENZ ROXX SPECIAL GEARLUBE of lubricants are supreme performance industrial gear oils, formulated with high quality base stocks fortified with sulfur-phosphorus additive system. They are designed to work efficiently in all types of enclosed gear drives with circulation or splash lubrication systems, where outstanding extreme pressure characteristics (EP/AW properties), extremely high load carrying capability and excellent demulsifying properties are desired. Moreover they offer extremely high protection against micropitting, wear and corrosion in enclosed gears and all types of oil lubricated bearings. Suitable for use in large & small spur bevel, spiral, helical & herringbone gears. for more information, please contact us.
LUBENZ MONOX MARINE MULTI SYSTEM series is a range of high performance marine multipurpose system oils formulated with high quality paraffinic base stocks and balanced additive system to ensure optimum performance and excellent protection in low speed, high output cross head marine engines, operating on residual fuels. It has sufficient alkalinity to neutralize any strong acidic combustion products which may enter into the crankcase and it demonstrates high load carrying ability under severe operating conditions. for more information, please contact us.
LUBENZ GEAR OIL ROXX GL-4 of lubricants are high performance heavy duty gear oils, formulated from high quality base oils and an advanced additive system. These lubricants are designed for automotive heavy- duty transmissions, axles and final drives. Moreover these oils are engineered to work efficiently in transmissions where protection against wear and scoring is required and high level of oil film protection is desired. for more information, please contact us.
LUBENZ GOLDEN TORQUE CONVERTOR HF-32 is a high performance dual clutch transmission fluid, formulated with high quality fully synthetic base stocks and advanced additive technology with consistent shear stability for maintaining optimum film thickness for reliable protection of gears and bearings, also providing an outstanding improvement in friction durability enabling longer drain intervals under a broad range of driving conditions, temperatures and transmissions. It is designed specifically to be used as a service-fill DCT transmission fluid for European, Asian and American vehicles equipped with wet & dry dual clutch transmissions. Outstanding torque retention to provide smooth shift feel without NVH (Noise, Vibration and Harshness) concerns and all-around lubrication protection of the transmission components to help extend transmission service life with a smooth driving experience. It provides exceptional copper corrosion protection for better hardware durability, excellent oxidation control to provide longer fluid life and good seal compatibility for better leakage prevention. for more information, please contact us.
LUBENZ SOLO TRANSFORMER OIL BS and GB are severely refined hydro-cracked / hydro-treated virgin inhibited insulating oils with highest degree of purity and stability. It is manufactured from judiciously selected blend of latest technology feed stocks, which is highly suitable for all grades of Power & distribution Transformers, Circuit Breakers, Oil filled switches and X-ray equipment. for more imformation, please contact us.
LUBENZ IND SPINDLE OILare formulated from select high-quality, low viscosity base oils and additives that impart good resistance to oxidation and protection from rust and corrosion. They possess very good resistance to foaming and separate readily from water. Specifically designed for the lubrication of high-speed spindles in machine tools. They are also used in some critical hydraulic, circulation systems and airline oilers where the appropriate viscosity grade is selected. for more information, please contact us.
LUBENZ PETRO Rock Drill oil series of lubricants are supreme performance Pneumatic Rock Drill & Tool oils, formulated with high quality base stocks fortified with sulfur-phosphorus additive system. They are designed to work efficiently in pneumatically operated rock drills in underground and surface mining operations. They offer optimum adhesiveness and emulsification with water to avoid adverse effects of rust and corrosion. Their excellent wear protection property helps in reducing component wear and maintains adequate lubrication film to carry high loads. for more information, please contact us.
LUBENZ SP CUTTING OIL is high quality water soluble cutting oil specifically formulated for cutting and grinding operations of metalworking for both ferrous and non-ferrous components. These oils are formulated to provide outstanding emulsion stability & rust inhibition and woks satisfactorily for all types of processes involving fine carbon steels. for more information, please contact us.
LUBENZ SUPER NANO HIGH TEMP CALCIUM SULPHONATE COMPLEX GREASE, made of the NEW GENERATION calcium sulfonate complex soap designed by LUBENZ. This new soap has enhanced properties in terms of water resistance, load capacity, thermal resistance, anticorrosion properties while keeping a very high level of pumpability and ability to lubricate well in case of high speeds. for more information, please contact us.
LUBENZ PIONER GREASE CALCIUM BASE-EP series are high performance greases, formulated with Calcium based thickeners and an ISO VG 320 mineral base stock to provide added protection against wear, rusting and water washout. They are available in NLGI grades 2 & 3, which are suitable for general purpose automotive applications at moderate temperatures and loads. The suitable operating temperature range is from -20�°C to 80�°C maximum. It does not contain lead or any other heavy metals which are considered harmful to human health and environment. for more information, please contact us.
LUBENZ ULTIMATE HIGH TEMPERATURE CLAY BASED GREASE are high temperature greases, formulated with bentonite clay based thickener and extreme pressure additive system to provide extra protection against wear, rusting and water washout especially in industrial equipment operating under heavy loads and high temperatures. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 150 & 320. It retains its consistency at high temperatures and provides good storage stability. for more information, please contact us.
LUBENZ XTREME LITHIUM â?? MOLY BASE GREASE are high performance greases, formulated with lithium based thickeners fortified with Molybdenum Disulfide (MoS2) solid lubrication, high quality base oils and extreme pressure additive system to provide excellent protection against wear, rusting and water washout. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 460 & 320. They are suitable for most types of Automotive and Industrial applications, including heavy-duty Marine applications where high temperatures, heavy shock loads and extreme unit pressures are present. LUBENZ XTREME LITHIUM â?? MOLY BASE GREASE greases are suitable for operating temperatures range from -20�°C to 130�°C, while LUBENZ XTREME LITHIUM â?? MOLY BASE GREASE suitable for operating temperatures range from -25�°C to 120�°C for more information, please contact us.
LUBENZ ULTRA NANO LITHIUM COMPLEX GREASE are high performance greases, formulated with lithium complex based thickeners, high viscosity index base oils and extreme pressure additive system to provide excellent protection against wear, rusting and water washout. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 220. They are suitable for most types of Automotive and Industrial applications, including heavy-duty Marine applications where high temperatures, heavy loads and extreme unit pressures are present. EP 1, 2, 3 & 2 Moly greases are suitable for operating temperatures range from -20�°C to 140�°C, while EP 00 & 0 greases are suitable for operating temperatures ranging from -25�°C to 130�°C. for more information, please contact us.
