EQUINAS TFO 60u High Quality Un-Inhibited Transformer Oil EQUINAS TFO 60u is a high-quality un-inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs). Applications: Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials Features and Benefits: Excellent insulating properties High dielectric strength (1) Low power factor Resists oxidation and deposit formation Excellent low-temperature properties Compatible with materials used in transformers Does not contain any PCBs Meets or exceeds the IEC 60296 Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
Premium greases are formulated with both Lithium, calcium soap mixed type
Total-Multis Ep3 Nl Gi 3-Ttlmltep3, MULTIS 3 is a multipurpose grease for general lubrication under normal operating conditions and loads, formulated for lubrication of all kinds of universal applications in transport, agriculture and off road equipment, operating in wet, dusty and/or dry conditions.Lubrication of all kinds of bearings and joints when the temperature and loading conditions are normal.Pre-eminently suitable for passenger car, light truck and leisure vehicle applicationsBenefits:MULTIS 3 is miscible with most other conventional soap greases.Excellent mechanical stability avoiding ejection or loss of consistency during operation.Excellent pumpability due to the low temperature characteristics and smooth texture.Very good water resistance, even in a humid environment a sufficient lubricating film will be maintained.
MACH-V 0W-20 API SN/SP-Plus, ACEA C5, C6, ILSAC GF-6 A DESCRIPTION: MACH-V 0W-20 is a fully synthetic lubricant that is mandatory for the newest VW/Audi engines. It is developed to prolong the life and maintain the efficiency of emission systems. It is also designed to provide outstanding engine cleanliness, wear protection, and strong durability to keep your engine running like new. A substantial fuel saving is reached through the use of the ultra-low 0W20 viscosity grade. APPLICATIONS: This product is developed for mandatory use in the newest 2.0 TFSI 140 kW and 3.0 TDI CR 160 kW engines of VW and Audi which require the VW specification 508 00 and 509 00. KEY FEATURES: Total engine protection performance in keeping the engine clean. Fuel economy superior fuel economy and CO2 reduction. Cold start excellent fluidity at low temperature. SPECIFICATIONS: Meets and exceeds: API SN/SP-Plus, ACEA C5, C6, VW 508 00/509 00, VW TL 52 577, FORD WSS-M2C956-A1, PORSCHE C20.
MACH-V 0W-16 API SN Plus, API SP/RC, API SN Plus/RC, API SP, ILSAC GF-6 B. MACH-V 0W-16 with its low viscosity and outstanding fluidity this oil significantly reduces wear and ensures fuel savings and lower CO2 emissions. The optimized additive package reduces soot and deposits and keeps the engine clean. This product has been specifically developed to meet the challenging requirements of the latest ILSAC GF-6 B standard where fuel economy and CO2 reduction are important. It provides the performance needed for the most recent requirements for gasoline-fueled US and Asian passenger cars.
20W-50 is a superior quality multi-grade engine oil specially developed for petrol & CNG passenger cars and SUVs. It is formulated with high quality severely hydro processed base oils and carefully selected additive technology to provide smooth running and engine protection at all weather condition. Strong protective film of this oil provides ultimate protection of engine components under higher operating speeds, temperatures and other adverse conditions. Applications: 20W-50 is recommended for earlier generation passenger cars and SUVs running with petrol and CNG.
Rotol Long Drive NLGI 3 This is Lithium based multipurpose grease manufactured from superior quality base oil and soap. Its excellent structural stability, water resistance property, higher drop point and very good oxidation stability ensures long grease & component life. It has outstanding rust protection ability.
We are supplier and exporter of Hydraulic Oil. Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs. Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.
Lubricant, greases, grease, 4tmotocycle oil, 2t out board oil, conning oil, hydraulic oil.
Lubricants, grease , engine oil , motor oil, synthetic oils, 5w30,5w40,10w30,10w40,20w50,20w40,.Manufacturer and supplier
Automotive parts and engine oil..Shipping/ forwarding.
Items Method ZD500C3 Grease Type Lithium Grease Color Yellow or Blue Texture Smooth and transparent NLGI 3#Thickener Type Lithium base-12-hydroxy Thickener Content 13%-15% Penetration Worked 60 GB/T 269 240-250 Dropping point min GB/T 4929 135-140 Copper Corrosion GB/T 7326 pass Base Fluid Properties Base Fluid Type Mineral Viscosity @40 cst GB/T 265 185 Viscosity @100 cst GB/T 265 12 Pour Point -20 Propertie Great in anti-water; Better mechanical invariability; Better anti-rust; Good oxidation stability; Can take place of calcium base and sodium base greases. This product is made of refined base oil, thickened by fatty acid metallic soap thickener, added with many kinds of additives, for instance, abrasion and extreme pressure resisting, anti-corrosive, antioxidant and rustproof etc.
Ensures smooth operation of machinery.
Provides superior engine protection and performance.
1. Characteristics - Appearance Method - Visual Unit - Result - Bright & Clear 2 . Characteristics - Color Method - ASTM D 1500 Unit - ASTM Color Result - 2.5 3 . Characteristics - Density @ 15.6 Method - ASTM D 1298 Unit - G/CM3 Result - 0.868 4 . Characteristics - Kinematic Viscosity @ 100 Method - ASTM D 455 Unit - MM2/S Result - 15.92 5 .Characteristics - Kinematic Viscosity @ 40 Method - ASTM D 455 Unit - M2/S Result - 107.38 6 . Characteristics - Viscosity Index Method - ASTM D 2270 Unit - Result - 158.47 7. Characteristics - Pour Point Method - ASTM D 97 Unit - Result - -6 8 . Characteristics - Flash Point Method - ASTM D 92 Unit - Result - 192
We are the leading exporter, supplier and manufacturer of Diesel Engine Cooling Liquid. Based in Mumbai, Maharashtra our treatment has especially been designed to overcome the undesirable characteristics that are usually found when using chromate or soluble oil corrosion inhibitors. The treated re-circulating water of cooling liquid is usually colorless. The leakage at the packing glands produces zero crystalline deposits or unsightly stains. Youâ??ll also not experience any foam or carbonization at points of high transfer. It is an effective corrosion inhibitor that is non-chromate and non-abrasive. It is not a soluble oil and is pH buffered. Compatible with antifreeze it protects the Ferrous and copper bearing metals by Minimizing metal oxide deposits. Info : Prevents acid attack Applicable where water is the heat source for the evaporator/distiller Reduces disposal and toxicity problems Safer to handle Does not damage seals, hoses packing No foam or carbonized deposits Not sensitive o overdosing Easily tested and controlled Dose not form fouling deposits when mixed with ethylene glycol Application and Use The recommend treatment level of PARAFIX-DEWT diesel engine cooling water treatment is 3000-4500ppm. This represents an initial dosage of 3.2 KG per ton of circulating water. Subsequent dosages are dependent upon the concentration found in the re-circulating water. Diesel engine cooling water treatment is an effective corrosion inhibitor for all the normal ferrous and copper bearing metals in a circulating water system. There are no deleterious effects on glands; etc. It is compatible with antifreeze materials will not form objectionable sludge's. Efficient heat transfer is assured since corrosion is held to ammonium and surfaces are maintained free of deposits. Diesel engine cooling water treatment is recommended for systems with good quality distilled water makeup.
32.5% Urea + 67.5% DI water 10L/ Drum 2 Drums/ Corrugated Carton ISO 22241 IATF 16949 ISO 9001 ISO 14001 OHSAS 18001
Whether you need the original blue and yellow can with thousands of uses, or a penetrating oil, lubricant, cleaner, degreaser or solution to protect against or remove rust, we have got you covered. Get the Job Done Right with a range of products from WD-40 Brand.
The Cyclo White Greaseâ??s superior formula sprays on as a liquid, allowing it to penetrate deeper to reach the smallest crevices where it will solidify, lubricate & protect. White Grease\s ability to remain soft and pliable without drying out, allows it to last longer than other lubricants. Great for metal to metal, metal to plastic, & plastic to plastic applications.
Powergear SP ISO VG 100/ 150/ 220/ 320/ 460/ 680 range of oils have been developed to meet the widest range of requirements of EP (Extreme Pressure) lubrication such as industrial� gear oils operating under� severe duty. The oils are formulated from minerals base stocks and additives such as sulphur and phosphorus compounds to satisfy the widest range of operational requirements. APPLICATION Powergear SP Oils are recommended for lubrication of all types of industrial gears especially where operating conditions involve heavy loads, high pressure, high speed and high relative sliding velocities at elevated ambient and operating temperatures. Benefits Thermal and oxidation stability permitting continuous use at operating temperatures as high as 100 C. Grand demulsibility for rapid water separation. Excellent corrosion protection. Good anti-wear and EP properties. Long operating life.
