Characteristics of Gwell EVA film production line: (1) EVA single screw extruder is used for extrusion, and the barrel constant temperature circulating water cooling system solves the technical difficulties of EVA plasticizing and non-crosslinking. (2) Double-sided embossing is adopted for the roller body, and technical difficulties of adhesive roller are solved. (3) The cooling part adopts the cooling roller and the stress relief cold bed to make the film run smoothly and fully finalize the design, ensuring the shrinkage rate is less than 3%. (4) The whole line adopts PLC automatic control to realize man-machine interface operation. (5) The production line is equipped with online quality monitoring and control system to ensure the product qualification rate. (6) Patented micro-tension winding machine, the line speed of the whole production line can reach 14m/min
1.VOL-100L Epoxy Resin Mixing Machine: 1.Electronic vacuum gauge more precision. 2.Triple safety design. 3.Oil cycling heating surround pot, heated evenly. 4.Thin film de-gassing excellent vacuumize. 5.Adopt frequency motor to control mixing speed, quick degassing, uniform mixing. 6.Compact structure ,less space, flexible use. 7.the temperature control system has functions of temperature display, automatic temperature limiting, safety protection and so on. 8.Use strring and injection vehicle directly, it is convenient to use. Mixing Machine resin transfer molding machine 2.Technical Datas: Mixing Machine resin transfer molding machine Mixing Machine resin transfer molding machine 3.Applications: Application:Used for mixing epoxy resin,Hardener,Silica powder,pigment. Mixing Machine resin transfer molding machineMixing Machine resin transfer molding machineMixing Machine resin transfer molding machine 5.Mixing Machine Production Process: Mixing Machine resin transfer molding machine
Max. Product Volume L 12L/1;5L/2 Dry cycle PC/H 600x2 Screw diameter MM 90 screw L/D ratio L/D 25 screw motor power KW 37 screw heating capacity KW 6.8 No. of heating zone Zone 4 output of HDPE KG/H 130-150 oil pump driver power KW 18.5 clamping force KN 160 mold stroke MM 240-600 size of mold(W*H) MM 550x500 Moving distance MM 600 Max. Die diameter(W*H) MM 220 Die heat capacity KW 3.5-5.3 Blowing pressure MPA 0.6-0.8 Air volume M3/Min 0.8 Cooling water pressure MPA 0.5 water consumption L/Min 80 weight of machine Ton 12 size of machine M 4.5x3.3x2.8
Injection Cooler to cool the mould there are cooling pass-ways in the mould. Cooling water flows around these pass ways to remove the heat from the product This transfers the heat into the water requiring cooling. The hydraulic oil is pumped around the system at the high pressure for all the robotic parts on the machine. The hydraulic oil heats up when the hydraulic pump runs caused by the machine cycling.
factory 1.high quality clamping mould 2.Supply APG moulds 3.Experienced engineers 4.Long life service Heating plate size Clamping force Speed of clamping close Clamping open speed Distance between heating plates 800X600 mm 250 3.1 (2.4) 4.8(3.3)m/min) 125-1175mm Heating power Hydraulic unit power Tilting degree Machine dimension Machine weight 24 KW 5.5 (KW 5 6560X1020X3205 7350 Products 1:Good product quality, fine surface finish of products without bubbles. 2:High efficiency and high automation,only need 1/2 workers operate APG machine,efficiency greatly raised but the intensity of labor is decreased. 3:Chemical resistance,electrical insulation,strength resistance greatly improved. APG machine work process Products 1:Good product quality, fine surface finish of products without bubbles. 2:High efficiency and high automation,only need 1/2 workers operate APG machine,efficiency greatly raised but the intensity of labor is decreased. 3:Chemical resistance,electrical insulation,strength resistance greatly improved.
Machine tool power 0.75kW 1.5kW 1.5kW 1.5kW Max outline sise of machine tool 600x1000x1200 700x1000x1300 700x1000x1400 850x1000x1500 If you want to order, please send the pictures and size of your coils to us. ( include Diameter of wire, Height of winded coil, Inner diameter of winded coil, Outer diameter of coil ). we'll recommend the most suitable one for you. Automatic CNC circular Toroidal coil winding machine for toroidal transformerAutomatic CNC circular Toroidal coil winding machine for toroidal transformer
DADAU is highly-experienced in accumulation blow molding machines for this kind of DDSJ300A, which was already served to many end users and some even bought 2 sets in the same year from DADAU. Its upgrade types are DDSJ300X2A, DDSJ300X3, and those differ with DDSJ300A in layers, diehead, structurers, etc. DDSJ300A can be used to produce 30L to 300L chemical drums, plastic barrels, jerry cans, single or double L-ring plastic drums, etc. For more details, pls contact with us freely. Main Technical Data: 1. Screw Dia. 120mm; 2.L/D ration: 30 3. Screw Speed: 0-50rpm 4. Plasticizing Capability: 280-300kgs/hour; 5. Extruder Drive Power: 132KW 6. Extrusion System Heating Power: 35KW 7. Diehead Accumulator Capacity: 25L 8. Parison Thickness Control Point: 64points 9. Max. Product Volume: 300L 10.Diehead Heating Power: 27KW 11. Platen Sizes WXH: 1300x1400MM 12.Clamping Force: 1000-2000KN To be continued from DADAU Data Table. Links: https://www.dadauebm.com/product/ddsj300a-dadau-ebm-for-single-layer-chemical-drums-up-to-300l/ Application 1. Raw Material: HMW-HDPE 2. To Produce:any hollow products 3. Container Capacity: 300/150L/50L Features 1. Variable frequency motor is utilized for extruders to keep speedy, stable and energy-saving high productivity; 2. Electromagnetic Heating System for the die head; 3. 100 Point axis Wall thickness control system 4. Two pulling-rod clamping structure-----stable and reliable 5. Hydraulic system by servo drive-----high energy saving 6. PLC+ touch screen----easy to operate 7. Utilizing stock extruder for better consistency in parison weight, 8. Spiral flow channel design on die head without weld point ----homogeneous distribution 9. Quick color changing
DDSJ300X2 Double Layers EBM (i.e.: Extrusion Blow Molding Machine) DDSJ300X2 is 2 layers EBM with acumulator created by DADAU. To produce 200L or 220L chemical drums Double layers & 2 colors &Twin L-ring or Single L-ring For example such kind of 220L barrel Weightï¼?8.5-10.5kg/pcs Productivityï¼?over 20pcs/hour 2 layers are perfectly even from the slicing, nice-looking ! Falling resistance is great from the dropping testing, quality visible! IKV Structurer Adopted High output, Nice Plasticizing quality! Double layer Accumulator Nitriding Hardness is above HV900 Four-bar Structurer for the Clamping Unit Servo Control of the Mold Opening&Closing Stable & Fast Operation, High Clamping Pressure A ratchet wrench is enough to move the clamping unit Big space between the upper guide pillars, Easy for lifting the mold from its top. The electric system is controlled by OMRON PLC 64 points axial wall thickness control system Rich content in touch screen display Curve Set, Operation Data Set, Fault Alarm etc. Full Screen Display. The main oil tank and servo oil tanks are separated, reducing the oil change frequency The servo cylinder hydraulic system adopts unloading relief valve and servo valve of Shanghai 704 Research Institute (or Moog) Contact DADAU for more details!
Specialized in producing customized plastic bottle for food/sauce/cooking oil/etc; cosmetic containers are also available, please contact for more details!
Specialized in producing customized plastic bottle for food/sauce/cooking oil/etc; cosmetic containers are also available, please contact for more details!
Digital Density Apparatus
Engine, Transmission & Construction Equip. Parts :. Oil Filler Caps, Assly. Dipstick, Thermostat Housing Cap, Gear and Cover. Oil Reducer , Oil Slinger , Plastic Support Idler Gear and Sliding Bushes. Wear Pads, Internal & External Strips. Engine Adaptors & Breather Assly.
Transmission Parts
Colour Matching Booth
Impact Tester
Computerized MFI Tester
Digital Hot Air Oven
Hot Chamber injection die casting machine is used to produce precision castings, such as buckles and accessories for the leather industry, garment industry and electrical appliances, promotion gifts, medal, jewelry from low-melting zinc alloy and lead alloy. Structure The hot chamber injection die machine consists of die open/close mechanism, injection mechanism, ejection system, spray system, cooling system, metal melting furnace, control system, etc. Features 1.Compact design casting and furnace into one unit. 2.Injection system with electric heating nozzle 3.Pneumatic sweeping release spray nozzle. 4.Hydraulic injection, clamping and ejection. 5.Die stroke adjustable. 6.Injection stroke adjustable. 7.Hydrautic nozzle engaging. 8.Gear type hydraulic adjustment for small to big castings. 9. Metal melting furnace can be heated by oil or electric to user?s option. 10. Each mechanical action is interlocked in electric to ensure the normal operation and safe production for manual, semi-auto or full-auto Unit KTHIC5T KTHIC15T KTHIC25T KTHIC35T KTHIC88T Die clamping forceKN 50 150 250 350 880 Tie bar Diametermm 25 35 40 45 60 Die strokemm 70 115 135 140 250 Tie bar spacemm 130*100 235*245 240*260 305*220 540*580 Die thicknessmm 24.5-76 130-230 130-260 130-280 150-360 Injection strokemm 60 60 85 95 130 Injection forceKN 11.7 150 250 350 880 Injection plunger diamm 25 35 38 42 45 Effective Injection weight 150 200 500 700 1020 Sweep strokemm 200 200 250 300 Crucible capacity(zinc)Kg 90 70 160 160 360 Accumulator capacity L 10 6.3 10 16 20 ldle loop S 2.5 3.0 4.5 4.5 8 Nozzle heatingKW 1.0 1.0 1.5 1.5 2.5 Furnace heatingKW 6.0 8.5 11.5 11.5 21.0 Motor Power KW 4.0 4.0 5.5 7.5 11 Hydraulic PressureMpa 5-7 10-14
Zhejiang keli plastic machinery co.,ltd has many types of IBM machine,such as SZCX130/30T,SZCX160/45T,SZCX250/60T,SZCX300/70X,SZCX700/135X.We have more than 20years in packaging field.any questions,
zhejiang keli plastic machinery co.,ltd is specilized in one step injection blow molding machine and injection blow mold more than 20 years.the machine is widely used in food,cosmetic,pharmaceutical packaging field.
