Used for: Ducts and conduits Aerial lashed Direct burial (armored only) Applications requiring good ozone, moisture and weather resistance Characteristics: Operating temperature: 40óx to 70óxc (storage) â= 40óx to 70óxc (operating) Color description: Fibers: eia/tia 598a Jacket: black Product description: Buffer tube: gel filled thermoplastic Armor: corrugated steel (armored only) Jacket: polyethylene Specifications: Crush resistance (eia45541): 1000n/10mm Impact resistance (eia45525): 2000 impacts @ 1.6 nm Tensile strength (short): 1500n Min.Ben radius, installation: 20x cable o.D. Min.Ben radius, long term: 15x cable o.D. Max.Weight: 15.5kg / 100m Other: Glass type: singlemode enhanced Operating wavelength (nm): 1310/1550 Max attenuation (db/km): 0.35/0.22 100 mbit fast ethernet min.Link length (meters s/l): /5000 1 gigabit ethernet min.Link length (meters s/l): /5000 10 gigabit ethernet min.Link length (meters s/l): /10000 Legend: "max attenuation" for microloose tube cables "s/l" short wavelength (850 nm) / long wavelength (1310 nm) "singlemode enhanced" low water peak singlemode compiles with itu g.652.C/d Weight:150kg per reel 400m/reel
Product Description Material: PP and attached with steel nail. Using method: Insert the wire in the cable clip, and then fix the wire by fastening down the steel nail on the wall with hammer. Application: Generally for fixing the wires and wiring indoor. Item No.: From 4mm to 40mm We have circle cable clip,square cable clips Plastic box, paper box, bag, Different have different package.
Product Description 1. Used for machinery control boxes, distribution plates, electrical machinery, etc. 2. Made from UL nylon 66, 94V-2 and tight ring from rubber IP68 . 3. Special designation, good strengths and none damage to electrical machine 4. Cable can be inserted through directly then tighten easy and save time Different size have different package
Used for power, source, traffic, military affairs, build, automobile, mechanical, communication, broadcast and television.
Sas 32p-4 sata 7p 90(sff-8484 to sata)
Sas 32p-4 sas 29p (sff-8484 to sas 8482)
Fiber optic splitters and couplers are used to split or combine optical signals in various kinds of networks Common applications of splitters and coupler are: system monitoring, fiber to the home, network redundancy, laser splitting Features: Single and multiples mode are available Industry standard and custom housing available Variety of connectors available 1 x 2, 1 x 4 and 1 x n custom couplers configurations available Low insertion loss Environmentally stable Specifications: Operation wavelength: 850nm or 1,310nm or 1,550nm, others on request Thermal stability: í_0.1dB over -10 to 85íµ Operating temperature: -10 to 85íµ/-20 to 70íµ/-20 to 70íµ Applications: Optical communication system Optical testing system Optical fiber sensor Optical power distributor
Consist of bottom and lid, with two out-holes at the bottom
Feather: Low insertion loss High return loss High stability and reliability Customer design available Applications: Collimator Splitter Awg Wdm Isolator Active device As per customers' requirement
Material:stainless steel 100pcs/bag
Our production strictly complies with ce/sgs-rohs standards. 100-1000pcs/bag
Double locking, strong supporting capacity 100pcs/bag
Optical filter
Color tmeperature conversion filters are used to balance the color temperature of a light source. They will balance tungsten light source to daylight or vice versa, providing significant changes in color temperature. These filters can also be used to create an intertional warm or cool effect.
Optical low pass filter (OLPF) is used in high end (high resolution) digital camera sensor to eliminate interference influence (Moire pattern) by crystalline birefringency. An OLPF can cut off the undesired high spatial frequency when the sensor resulting the image. IR cut-off function is often incorporated into OLPF as well. Some use absorptive blue glass + AR , or direct coating an IR cut thin films layers .
The ir pass filter (infrared pass filters) that operates over a very wide temperature range to reflect the entire visible light spectrum while very efficiently transmitting infrared wavelengths. So that can increase the temperature of bathroom.
Conversion color temperature filters
1) HDMI to HDMI 2) Metal Shell 3)100% Triple Shield 4)Oxygen Free Copper Conductor 5)24K Gold Plated 6)Support 1080p OPP BAG
Applications: Long distance telephone, catv, data communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct Burial (with armouring). Construction: The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500n (short term installation); 900n (long term installation) Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter) Twist (torsion length): 125 x overall diameter Working temperature: -20íµ ~ +70íµ (pe sheath) Storage temperature: -40íµ ~ +70íµ (pe sheath) Product highlights: Small diameter and light weight. Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber Cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress And achieve better flexibility. íewide operating temperature range. Roll, box, drum
í= Applications: Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable, it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between floors. í= Installations: Installed along the wall, the roof, interlayer, canal and indoor. í= Construction: The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central element made of 3 sub-units. í=Technical Parameters: íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode) íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation) íe Minimum Bending Radius: Short Term Installation: 20 x Overall Diameter Long Term Installation: 10 x Overall Diameter (Non-Armoured); 20 x Overall Diameter (Armoured) íe Twist (Torsion Length): 125 x Overall Diameter. íe Working Temperature: -10íµ ~ +70íµ (PE sheath) íe Storage Temperature: -20íµ ~ +70íµ (PE sheath) í= Product Highlights: íe Small diameter and light weight. íe The high tension characteristics of the aramid yarn serving as strength member can offer good stability in the transmission performance. íe Compact and flexible construction are especially suitable for indoor installations. íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved with excellent strip ability. íe LSZH jackets can be offered for indoor application for which flame retardancy is required. íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation within the operating temperature range. íe Fiber geometry are strictly monitored to ensure superior transmission performance. roll,box,drum
