HQ mount no penetration easy install solar ballasted roof mounting systems ballasted mount flat roof solar mounting bracket Ballast mounting system with great flexibility and lower cost, ballast mount can be used for both commercial and civil flat roof solar system. Material Al 6005-T5/AL 6063/AL available Surface Anodized,Black Electrophoresis Installation site Flat solar roof top mounting system Certification ISO,SGS,Aluminum testing report Installation direction Horizontal/Vertical Applicable panels All kinds of panels
Solar module is the core part of solar PV power systems, also is the highest value part of it The function of solar module is to convert the sun's radiation to electrical energy, or transfer it to battery and store in it, or to drive the load running the product has been widely used in space and ground, it mainly used for power generation systems, charging systems, road lighting and traffic signs areas It could offer a wide range of power and voltage, and with high conversion efficiency, and long service lifespan Main characteristics: First-class production technology and packaging technology Adopting the world's leading technology of silicone and polycrystalline silicone cells, power density, peak hours more battery power, higher conversion efficiency Beautiful, stable, easy to take down the anodic aluminum frame electric degrees and has a wind-resistant, anti-snow function By the high transmittance, low iron tempered glass, anti-aging of the EVA (polyethylene - vinyl acetate), high-performance crystalline silicone solar cells, good weather resistance TPT (fluoroplastics composite membrane) by pyramid, has a good Weather resistance and anti-UV, hail, waterproof capacity Built-in bypass diode inside the junction box, which could prevent the effects dark spots of local damage to cells Features: High transmissivity low-iron tempered glass, strong aluminium frame Manufactured according to international quality and environment management system (ISO 9001, ISO 14001) Low voltage-temperature coefficient allows higher power output at high-temperature condition High efficiency, high reliable solar cells ensure our product output stability high efficiency crystalline silicone solar cells 100% A grade solar cell with positive tolerance power range High frame resistant & double-sided fluorine TPT Long lifespan, easy installation, high wind & hail impact resistance Modules binned current to improve system performance Warranty: 10 years limited product warranty 15 years at 90% of the minimal rated power output 25 years at 80% of the minimal rated power output Applied scope: Countryside and remote areas Home and vacation villa Railway signal Beacon and beacon lights Small-scale desalination Small-scale irrigation pumping pumps Emergency system Emergency communication system
A solar earthing rod is a part of earthing equipment used in the solar power system. It is made of copper, galvanized at the surface. It connects the electrical circuits to the ground preventing them from electric shock or damage. The product is made available in dimensions as required by the client. It has been made with diligence by the experts at the company.
We are ENERGY, a solar panel factory . We have 5w- 550w mono and poly solar panels with half cut and bifacial craft. Also we have outdoor PORTABLE solar panels with battery for you to choose. We are professional in making solar panels for over 15 years. Certificate: CE , ISO, TUV, INMETRO ,Rohs ect.
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates.
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customer requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter�¢??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �?�±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customer�¢??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger
Product Introduction SANDI Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, itâ??s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 5, The output voltage can be set between -40 % to +20 % of rated voltage. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, TV, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 12, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 13, Solar controller adopt IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 14, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 15, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 16, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 17, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. 18, The controller also has temperature compensation function and RTC real time clock function,
Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] RS485 communication; AC bypass complementary function; Built-in charger
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, itâ??s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, itâ??s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
Solar Pump Inverter
High Frequency On Grid Solar Inverter SENSKON BRAND : 1KW TO 80 KW 1PH & 3PH AVAILABLE BRAND : INDIA SOLAR PV inverters take full account of the needs of end customers, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control,could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product. MPPT BASED TECHNOLOGY, INBUILT WIFI, GPRS & MONITORING DEVICES Features: Rate power: 1-80KW Wide range of MPPT voltage 100-500V MPPT efficiency up to 99.50% Optional integrated anti-back flow control Multiple communications: USB,WIFI etc Monitoring inverters freely via mobile phonese APP Continuous adjustable power factor
EXCELLENT PERFORMANCE Maximum efficiency 97.8%, battery efficiency 97.0% Maximum 12kW PV input power Maximum Charge/Discharge current 30A Large MPPT current, compatible with high-power solar panels Support full-house loads on backup port, maximum 12kW HIGH RELIABILITY Key components from international famous brands IP65 protection rating, good adaptability to complex outdoor environ- ment Multiple protections built-in, optional AFCI, Type II SPD Max. EMciency (PV to AC) 97.80% Max. EMciency (BAT to AC) 97.00% Euro. Efficiency (PV to Grid) 97.50% Input (PV) Max. PV Input Power 12,000W Max. PV Voltage Start-up Voltage MPPT Voltage Range Max. Input Current SSOV 90V Max. Short Circuit Current 70V-540V Nos. of MPPT 16A/16A 20A/20A 2 String per MPPT 1-Jan Input/Output (BAT) Battery Type LLithium-ion, Lead-acid 80-480 V Battery Voltage Range 30A/30A Max. Charge/Discharge Current Max. Charge/Discharge Power 6,000W/6,600W 6,000W/6,600W Output (Grid) Nominal AC Output Power 5,000W 6,000W Max. AC Apparent Power 5,500VA 6,600VA Max .AC Output Power (PF=1) 5,500W 6,600W Max. AC Output Current 25.0A 28.7A Nominal Grid voltage Grid Voltage Range Nominal Grid Frequency Grid Frequency Range Power Factor 220V/230V/240V, L+N+PE THDI 150V-300V (Adjustable) 50Hz/60Hz 45Hz-55Hz/55Hz-65Hz (Adjustable) >� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 0.99 @rated power (Adjustable 0.8 LD - 0.8 LG) <3%� (Rated Power) Nominal Output Power 5,000W 6,000W Nominal Output Current 22.7/21.7/20.8A 27.3/26.1/25.0A Peak Power(1min) 6,000VA 7,200VA Peak Power(5s) 7,500VA 9,000VA Nominal Output Voltage 220V/230V/240V, L+N+PE Nominal Output Frequency 50/60Hz Transfer Time <10ms THDV <3% @100% R Load Protection Protection Category Class I DC Switch Yes Anti-islanding Protection Yes AC Over Current Protection Yes AC Over Voltage Protection Yes AC Short Circuit Protection Yes DC Reverse Protection Yes Surge Arrester DC Type III, AC Type III PV Insulation Detection Yes Leakage Current Protection Yes AFCI Optional RSD Optional General Max. Operation Altitude 4000m (>2000m derating) Protection Degree IP66 Operating Temperature Range -25 % -60 % (>45 % derating) Relative Humidity 0-1 000/a Cooling Natural Cooling Mounting Wall bracket Dimensions (W*H*D) 491mm*348mm*1 70mm Weight 16Kg HMI & COM Display LED+APP Communication interface RS485/CAN (for BMS), RS485, DRM/RS485 (for Meter), Optional: Wi-Fi/GPRS/LAN Certification Grid IEC 61727& 62116, EN 50549-1, VDE 4105, AS 4777, CEI 0-21, G98, G99, RD1699, C10/11, NRS097 Safety IEC 62109-1/2, IEC 62477 EMC IEC/EN 61000-6-3, IEC 61000-3-11, IEC 61000-3-12 Warranty S Years
EXCELLENT PERFORMANCE Maximum efficiency 98.0%, battery efficiency 94.5% Maximum 15kW PV input power, continuously 10% output overload Maximum Charge/Discharge current 210A Large MPPT current, compatible with high-power solar panels Advanced parallel function HIGH RELIABILITY Key components from international famous brands IP65 protection rating, good adaptability to complex outdoor environ- ment Multiple protections built-in, AFCI, RSD Max. Efficiency (PV to AC) 98.00% 98.00% Max. Efficiency (BAT to AC) 94.50% 94.50% CEC Efficiency 97% Input (PV) Max. PV Input Power 12,000W 15,000W 12,000W 15,000W 600V � Max. PV Voltage 600v Start-up Voltage 90V MPPT Voltage Range 70V-S40V Max. Input Current 30A/22A/22A Max. Short Circuit Current 40A/30A/30A Nos. of MPPT 3 String per MPPT 2/2/2002 Input/Output (BAT) Battery Type Lithium-ion, Lead-acid Nominal Battery Voltage 48V � Battery Voltage Range 40V-64V Max. Charge/Discharge Current 210A/180A 210A/210A 210A/180A 210A/210A Max. Charge/Discharge Power 0,0ooW/8,000W 10,000W/10,000W 10,000W/8,000W 10,000W/10,000W Output (Grid) Nominal AC Output Power 8,000W 10,000W 8,000W 10,000W Max. AC Apparent Power 8,800VA 11,000VA 8,800VA 1,000VA Max. AC Output Power (PF=1) 8,800W 11,000W 8,800W 11,000W Max. AC Output Current 40A � SOA 40A SOA Rated Grid voltage 120/240V (Split Phase) / 230V (Single Phase) / 208V (2/3 Phase) 220V/230/240V, L+N+PE Grid Voltage Range 150-300V(Adjustable) Rated Grid frequency 60Hz 50Hz/60Hz Grid Frequency Range 55Hz-65Hz (Adjustable) 45Hz-55Hz/55Hz-65Hz (Adjustable) Power Factor 0.99 @rated power (Adjustable 0.8 LD - 0.8 LG) THDI <3% (Rated Power) Output (Back up) Nominal Output Power 8,000W 10,000W 8,000W 10,000W Nominal Output Current 33.4A 41.7A 34.8A 43.SA Peak Power (1s) 16,000VA 20,000VA 16,000VA 20,000VA Nominal Output Voltage 120/240V(Splitphase)/230V(SirgIephase)/]08V(2/3phase) 220V/230V/240V, L+N+PE Nominal Output Frequency 60Hz 50Hz/60Hz Transfer Time 10ms <10ms THDV <3% @100% R Load Protection Protection Category Class I Class I DC Switch Yes Yes Anti-islanding Protection Yes Yes AC Over Current Protection Yes Yes AC Over Voltage Protection Yes Yes AC Short Circuit Protection Yes Yes DC Reverse Protection Yes Yes Surge Arrester DC Type II, AC Type II DC Type II, AC Type II Insulation Detection Yes PV Insulation Detection Yes Leakage Current Protection Yes Yes AFCI Yes Optional RSD Support (MLRSD Sunspec) Optional General Max. Operation Altitude 2000m 4000m(>2000m derating) Protection Degree IP65 Operating Temperature Range -25�°C-60 %(>45 % derating) Relative Humidity 0-100% Cooling Fan Cooling Mounting Wall bracket Dimensions (W*H*D) 420mm*800mm*240mm Weight 37Kg PV Connection Terminals HMI & COM Display LED+APP, LCD(Optional) Communication Interface RS485/CAN (for BMS), DRM/RS485 (for Meter), RS485 Optional: Wi-Fi/GPRS/LAN Certification Grid iEEE1547: 2018, HECO SRD 2.0 IEC61727/62116,AS 4777.2,NRS 097-2-1 Safety csA C22.2 IEC 62109-1&2 EMC FCC Part 15 Class B EN61000 Warranty 5 Years
EXCELLENT PERFORMANCE Maximum efficiency 98.4%, battery efficiency 98% Maximum 15kW PV input power, continuously 10% output overload, 150% unbalance output Maximum Charge/Discharge current SOA Large MPPT current, compatible with high-power solar panels Advanced parallel function HIGH RELIABILITY Key components from international famous brands IP65 protection rating, good adaptability to complex outdoor environ- ment Multiple protections built-in, optional AFCI, RSD Max. Efficiency (PV to AC) 98.20% 98.40% 98.20% 98.40% Euro. Efficiency (PV to AC) 97.20% 97.90% 97.90% Max. Efficiency (BAT to AC) 98.00% 98% Input(PV) Max. PV Input Power 9,000W 1OOOV 15,000W 30000W 1000V 45000W Max. PV Voltage 150V 150V Start-up Voltage 160V-950V 160V-950V MPPT Voltage Range Max. Input Current 15A/15A 20A/30A 30A/30A 30A/30A/30A Max. Short Circuit Current 20A/20A 3 30A/40A 40A/40A 40A/40A/40A Nos. of MPPT 2 3 String per MPPT 1-Jan 1/2/2023 2-Feb 2/2/2002 Input/Output (BAT) 8 9 Battery Type Lithium-ion, Lead-acid Lith umion/Leadacid Nominal Battery Voltage 250V-600V 420V-800V 320V-800V Battery Voltage Range 150V-600V 150V-800V Max. Charge/Discharge Current 25A/25A 50A/50A 50A/50A 2*50A/2*50A Max. Charge/Discharge Power 9,ooow/5,800W 15,000W/11,300W 24,000W/ 22,680W 30,000/ 34,000W Output (Grid) Nominal AC Output Power 5,000W 10,000W 20,000W 30,000W Max. AC Apparent Power 5,500VA 11,000VA 22,000W 33,000W Max. AC Output Power (PF=1) 5,500W 11,000W 22,000VA 33,000VA Max. AC Output Current 3*8.3A 3*16.7A 3*33.4A 3*50.1A Max. Single Phase Power 2,500W 5,000W 10,000W 11,000W Max. Input Power 15,000VA 30,000VA 4S,000VA Max. Input Current 3*25A 3*50A 3*75A Rated Grid Voltage 380V/400V/415V,3W+N+PE 380V/400V/415V,3W+N+PE Grid Voltage Range 260V-520V (Adjustable) 277V-520V (Adjustable) Rated Grid Frequency 50Hz/60Hz 50Hz/60Hz Grid Frequency Range 45Hz-55Hz/55Hz-65Hz (Adjustable) 45HZ-55Hz/55Hz-65Hz (Adjustable) Power factor >� 0.99 grated power (Adjustable 0.8 LD - 0.8 LG) >� � 0.99 @rated power (Adjustable 0.8 LD - 0.8 LG) THDI <5% (Rated Power) <3% (Rated Power) Output (Back up) Nominal Output Power 5,000W 10,000W 20,000W 30,000W Nominal Output Current 3*7.6A 3*15.2A 3*30.3A 3*45.5A Max. Single Phase Power 2,500W 5,000W 10,000W 11,000kW Peak Power (Smin) 6,000VA 12,000VA 24,000VA 36,000VA Peak Power (10s) 7,500VA 15,000VA 30,000VA 4S,000VA Nominal Output Voltage 380V/400V/41 IV, 3W+N+PE 380V/400V, 3W+N+PE Nominal Output Frequency 50Hz/60Hz 50Hz/60Hz Transfer Time 1Oms 1Oms (typical) THDV <3% (R Load) <3 (R Load) Protection Protection Category Class I DC Switch Yes Anti-islanding Protection Yes AC Over Current Protection Yes AC Over Voltage Protection Yes AC Short Circuit Protection Yes DC Reverse Protection Yes Surge Arrester DC Type II, AC Type II PV Insulation Detection Yes Leakage Current Protection Yes AFCI Optional RSD Optional General Max. Operation Altitude 4000m (>2000m derating) 4000m (>2000m derating) Protection Degree IP65 IP66 Operating Temperature Range -25�°C -60â??C (>45�°C derating) -25 % -60 % (>45 % derating) Relative Humidity 0-100% 0-100% Cooling Natural Cooling Natural Cooling Smart Fan Cooling Mounting Wall bracket Wall bracket Dimensions (W*H*D) 530mm*550mm*212mm 660mm*570mm*230mm Weight 30Kg 32Kg 45Kg 55Kg PV Connection MC4/H4 MC4/H4 HMI & COM Display LED+APP, LCD(Optional) Communication Interface S485/CAN (for BMS), RS485, RS48S (for Meter), DRMs, 2â??DI (1 for RMO), 2â??DO, Optional: Wi-Fi/GPRS/LAN Certification Grid VDE-AR-N4105, IEC 61727/62116, AS 4777.2, EN 50549-1, C10/11, G99, CEI 0-21, NRS 097-2-1, RD 1699/661/413 Safety iEc 62109-1 &2 EMC EN 61000 Warranty S Years
