Handmade batik designs
Nonwoven more than 19 years. Below are our mainly line: Spunlace Nonwoven Fabric Raw Material: PLA/Polyester/Viscose/PP/Wood Pulp Technology: Parallel or Cross Type GSM:30gsm-120gsm Pattern: Plain/EF/Pearl/Mesh Width:10cm-330cm
PTFE Laminating Fabric for solar laminator mainly consists of high-performance fiberglass which is dipped with PTFE resin by the dipping machine. Generally speaking, the small-size laminator requires 1.25m in width; the large-scale laminator requires 1.8m, 2.0m, 2.2m, 2.4m; both of them require different length, generally not less than 6m. Its colors are brown, black and white; the grain is plain.
Product introduction: Dipped Weft Stiffness Fabric, is a kind of Special Dipped fabrics, which woven by Polyester industrial yarn in Warp direction and Polyester-monofilament yarn in Weft direction. Product Features: Low square gram weight, lower production cost, good weft rigidity, high breaking strength retention, and good adhesion to rubber. Dipped Weft Stiffness Fabric Star and Innovative products.
Nonwoven more than 19 years. Below are our mainly line: Spunlace Nonwoven Fabric Raw Material: PLA/Polyester/Viscose/PP/Wood Pulp Technology: Parallel or Cross Type GSM:30gsm-120gsm Pattern: Plain/EF/Pearl/Mesh Width:10cm-330cm
Composition: 100% Cotton Yarn Count: 40 40 Density: 72 72 With: 57/58
Polyester synthetic forming fabric is a commonly used filter mesh in the forming section of paper machine, the forming wire can be divided into 1 layer, 1.5 layer, double layer, 2.5 layer, and triple layer forming fabric, in order to increase the work life of the polyester forming fabric, Huatao weaves the nylon monofilament with better abrasion resistance in the weft, which makes the fabrics life longer and reduces the cost. The 1.5 layer forming fabric is actually a 5-shed single layer forming fabric that have modified to have extra yarns which provides it the same properties as that of a double layer one. 1.5 layer forming fabric is easy to clean, increase sheet release as well as retention and with the extra fabric provides an excellent drainage. The ideal 1.5 layer forming fabric for most paperboard and packaging grades applications, especially where a smooth top surface and long life potential are desired. In addition, Clean mesh yarn technology provides maximum resistance to premature fabric contamination. Polyester 2.5 layer forming fabric are also known as support shute double layer forming fabric or double layer extra designs. It's a standard double layer design with an extra shute yarn added on the forming side between the 2 regular cross direction yarns. This yarn increase the pulp fibre support and meanwhile create a more open structure as the amount of wear side yarns is reduced, compared with the forming side. 2.5 layer forming fabric's weaving effect greatly increases the fiber support index due to the addition of a fine weave at the top. The ratio of the top and bottom wefts is 2:1. It suitable for paperboard,newsprint,writing paper,tissue paper,printing paper,kraft paper. The SSB 3 layer forming fabric or "wire" of a paper machine is the continuous belt or belts of mesh screen upon which the paper sheet is formed. Most modern SSB 3 layer forming fabric are comprised of polyester monofilament. The weave pattern and layering of a SSB 3 layer forming fabric is designed to meet stringent requirements of dimensional stability, resistance to abrasion (on the wire side), minimum resistance to drainage, minimum wire-mark, and (sometimes) maximization of retention of fiber fines.
CFRP composite protective sleeve for high speed Permanent magnet rotors CFRP composite protective sleeve is suit for rotor protection sleeve of permanent magnet synchronous & asynchronous motor. It size can be customized, Bearing temperature max 180 When the rotor's speed is lower, For example 2000 rpm, or 3000 rpm,8000 rpm etc, choose stainless steel protection sleeve is good idea. Because it is lower cost. If the rotor's speed is higher, for example 20,000 rpm, 50,000 rpm, Please choose carbon fiber protection sleeve for the rotor. Stainless steel rotor protection sleeve can't match so higher speed. The max speed for carbon fiber protection sleeve is 100,000 rpm. Name Material Rotor speed Working temperature carbon fiber sleeve CFRP composite sleeve for electric rotors and generators T700 carbon fiber can be customized, Max 10,0000 rpm max 180 degree Carbon fiber tube for rotor protction's Advantage: 1. light weight, high strength,Size can be customized. 2. Can bearing high temperature-- 180 degree. 3. Conductive heat quickly 4. Non-Conductive magnet 5. Good dynamic balancing when high-speed 6. permanent magnet synchronous & asynchronous Motor rotor speed 60,000 rpm, The centrifugal deformation 0.2 mm It suit for the motor speed 10,000 rpm There are two way to produce the carbon fiber rotor cover: 1.Produce carbon fiber tube first ;Then Put the present carbon fiber tube cover the outside of rotor 2.Produce the carbon fiber cover directly outside of the rotor We are professional supplier for CFRP composite protective sleeve for rotors