Silicone chocolate heart mold 14 cavities ?chocolate heart mold; made from 100-percent food grade silicone ?durable and versatile; can be used for cooking in a traditional oven or microwave or freezing ?can go straight from the freezer to the oven ?can be used in temperatures from-76 degree f to as high as 446 degree f ?made in italy; dishwasher safe Size: 20*10*1.5cm Chocolate size: 3*3*1.2cm Weight: 50g about
Yj 66 structural silicone sealant Performance of structural silicone sealant High mechanical performances with joint movement capability of +(-)25%. Neutral cured, no corrosion, non poisonous Package of structural silicone sealant A component 200l iron drum B component 20l plastic drum Or a component 20l plastic drum B component 310ml plastic tube Storage and usable life of structrual silicone sealant Structural silicone sealant is stored on airtight container under 30¡ãc and 12 months of shelf life. Transportation of structural silicone sealant Non-dangerous product, it can be delivered by train, car, boat and air plane. Packge: iron drum a component:200l/irondrum b component:20l/iron drum or a component:20l/plastic drum b component:310ml/plastic drum
Packing: 7kg per paper barrel, diameter being 160mm or 180mm , 4 barrel /carton Suggest: While application together with joinleader other corresponding products, it has already showed perfect function both in testing and practicing. Storage: with a shelf life of 12 months in dry, ventilated and shady places below 32¡ãc Refer to product packaging for "use by" or expiry date. Limitation: Only suitable for those mentioned products above and do test before application Certificate: Msds, iso9001. Performance of butyl sealant Clean and dry adhesion surface to get rid of dirty, oily things. Lfz28 is applied by special hot-melt butyl extrusion machine. The extrusion condition could be satisfied through temperature and pressure adjustment, for example temperature could be adjusted over the range of 120¡ãc~150¡ãc. The environment temperature should not be lower 10¡ãc in application. Package of butyl sealant Lfz28 butyl sealant for insulating glass primary seal, black, 1kg/paper pail, 5kg/pail, 7kg/pail or supply according to customer required. Storage of butyl sealant -10¡ãc~35¡ãc, shelf life of 24 months. 4pcs/carton box
Lfz21 is a kind of two-part polysulphide sealant with high performance widely used for insulating glass, construction, transportation and refrigeration field. Performance polysulphide sealant Lfz21 polysulphide sealant has excellent elasticity, low gas permeability and adherent stability. The property is certificated by gb/t11944-2002, jc/t486 standard. Excellent weatherproof , no corrosion, no poisonous. Package polysulphide sealant Composition a 200l iron drum 330kg/drum ( =571.5mm) Composition b 20l plastic drum 30kg/drum ( =280mm or 285mm) Or composition a 20l plastic drum 33kg/barrel Composition b 3kg/barrel Storage polysulphide sealant Store at the dry and cool area in airtight container. When stored at or below 27¡ãc in the original unopened containers, this products has a shelf life of 9 months from the date of production. Packge: iron drum a component:200l/iron drum 330kg/drum b component:20l/iron drum 30kg/drum or a component:20l/plastic drum 33kg/barrel b component:3kg/barrel
Addition cure silicone can be used for cake, candy food grade products mold making, addition cure silicone features low shrinkage.(features for low viscotity , good operation. Excellent performance. 25kg/drum and 200kg/drum
Silicone rubber for mold making is primarily intended for poly resin crafts, pu crafts, pu resin crafts , gypsum crafts , unsaturated resin crafts, lighting and candles crafts , plastic toy , stationery gifts crafts industry, a large statue buddha, furniture, furniture decorative materials, statues buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils factory, europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. 25kg/drum and 200kg/drum
Manual molding silicone rubber is mainly used for model design of manual mold, pvc plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, electronic equipment antivibration, etc. 25kg/drum and 200kg/drum
It is one-part acetoxy silicone sealant. It is fast curing and permanently flexible, waterproof and outstanding weather resistant. It is suitable for sealing, repairing, glazing and mending of glass, aquarium, auto windscreen, glazing for window panels and other metal frameworks bonding. Where to use They are widely used in industry, building, automotive, packaging, and business, advertisement, and family decoration.They are mainly used in joints adhesion and seal among the glass, tiles, ceramics, aluminum, and fiber glass, power-coated and non-oily wood. Characteristic 1.One-part,acetoxy room temperature cure, easy to apply. 2.Excellent contact-change ability, no seasonal limited use. 3.Excellent adhesion to most building materials. 4.Outstanding weatherproofing ability, with service life of tens of years. 5.Medium or low modulus, eccellent tensile and compression restoring ability. Application 1.Clean with solvents such as toluene or acetone to keep the substrate surfaces completely clean and dry. 2.For better appearance cover outside of joint areas with masking taps before application. 3.Cut nozzle to desired size and extrudes sealant to joint areas. 4.Tool immediately after sealant application and remove masking tape before sealant skins. Limitations 1.Don't use to the joints,which is hidden in earth for long time. 2.Don't use in areas where no moisture has. 3.Don't use in places where have permeated grease,plasticizer or solvent such as wood permeated oil,uncured or half-cured resins,etc. 4.The surfaces coated with paint are unsuitable for sealant. 5.The products have poor adhesion to concrete,marble,mirror-glass,Zn-plated materials because of corrosion produced by acetoxy sealant.In this case,please select neutral silicone sealant. 1.Packing: In 300ml/280ml/26
semiconductor si wafers prime grade/high quality diameter from 2" to 12" ultra thin or ultra thick crystalline orientation , , most resistivity range 1000 pack/packs / week
Dummy grade silicon wafer. Diameter: 2-12 inch. Resistivity >1 ohm.Cm, surface condition: ssp, dsp or as-cut Dummy grade silicon wafer. Packing: coin roll or as customer request. ( like epack packing cassette) Usage: recycled solar material, machine testing, etc
Place of origin united states Brand name bondatek Bondatek provides ge, gaas, gap, gan, gasb, inp, inas, insb wafers to micro- electronics and optoelectronics industry in diameter range from 2" to 4" with orientation or , epd< 5000 cm-2 and epi ready surface. Inp based 25 piece/pieces
Silicone rubber for pad printing features description Pad printing silicone rubber with highprint times and abrasion resistance, without any impurities, with good printingeffects, permanent and durable, we can provide all kinds of colors and ourcatalyst is free charged. Applications： The pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys, trade makers .Silicone pad printing is a carrier which transfer printing the patterns on the steel plate onto the toys products surface. Silicone rubber for pad printing instructions Pad printing silicone rubber istwo-component silicone, part a is the liquid silicone rubber, part b is thecatalyst. The usual mixing ratio for silicone rubber and catalyst is100 : 2-3, eg. We take 100grams of liquid silicone rubber, then weadd 2-3 grams catalyst, mix then evenly and pour it to your mold.Then after 2-4 hours, you will obtain a printing pad. Features 1.Non-exothermic 2.Mold-releasability 3.Dimensional stability 4.Excellent flowability 5.Heat & chemical resistance 25kgs/drum vacuum package or 200kgs/drum
Shoe mold silicone rubber A. Mainly used for shoe soles mold making B. Two-component silicone rubber with tin-catalyst C. Cured under room temperature D. Low shrinkage E. Excellent fexibility & easy demould Shoe mold silicone rubber applications Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation. Shoe mold silicone rubber features: A.Two-component silicone rubber with tin-catalyst B.Cured under room temperature C.Low shrinkage D.Excellent fexibility & easy demould Shoe mold silicone rubber using instruction: The component a of shoe mold silicone rubber is white flowing liquid and the component b is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. Notes: Shoe mold silicone rubber is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon , mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried 25kgs/drum vacuum package or 200kgs/drum
Chemical name£ºVinyltrimethoxysilane CAS NO. : 2768-02-7 Molecular Formula: (CH2£½CH)Si(OCH3)3 Foreign Company¡¯s Trademark: Z-6300(Dowcorning) KBM-1003(ShinEtsu) XL10(Wacker) VTMO(Degussa) 25KGS Plastic Drum/190KGS Iron drum/950KGS IBC tank.or other packing on request.
JS-607 catalogue Characteristics of product: 1. Js-607 acid silicone glass sealant is single component, acetic acid type it easily solidified at room temperature and convenient to use and has solidification rate. 2. Good weatger-agin resistance. 3. Good cementation ability for various building materials. Major application: 1.Installtion of diversified doors and windows. 2. Cementation and sealing for glass decoration indoor. 3. Suitable for professional persons to use for general joint filling and sealing. Standard: Gb/T 14683-2003. 300ml/280ml/pc , 200kgs/drum , 270kgs/drum
MPS-31, defoamer is water-dilutable silicone emulsion containing silicone 30% active defoamer. Silicone mps-31 defoamer, it is formulated with carefully selected ingredients, which, at the prescribed level, are suitable for use in all industry 31 defoamer has excellent emulsion stability. Even diluted emulsions need only an occasional stirring to remain dispersed. 200kg barrel
It is a kind of fast acetic curing( based on polysiloxane), anti-fungi silicone sealant, which cures with atmospheric moisture to foam a high strength rubber seal with excellent adhesion to many surface such as glass, glazed surfaces, metals, most plastics, tiles, wood, concrete etc. GORVIA silicone sealant has excellent physical properties that are designed to provide outstanding durability and excellent UV resistant and weather resistant performance, multi-purpose and ready-to-use.
It is based on moisture curing polyurethane, containing safety propellant, is used to seal gaps and crevices with very high expansion yield UP TO 65 LITERS, the post-expansion is quite low to prevent deformation. The foam that dispenses from aerosol can is moisture cured and draws humidity from the air for pipes, windows and doorframes. Foam can be cut once fully cured, provides excellent bond to lumber, plywood, concrete, metals, masonry and other substrates.
GS-Series N302R is a Neutral Cure GS-Series N302R (non-acid, based on polysiloxane), single component silicone sealant with High tensile strength, high modulus, it is sag resistant and rainwater accessories and will not corrode zinc or zinc/aluminum galvanized steel. It has excellent physical properties that are designed to provide outstanding durability and excellent UV resistant and weather resistant performance, multi-purpose and ready-to-use.
We can supply A grade 156 mm Mono and Multi crystalline silicon solar cells (3.8W-4.0W,efficiency 16.6%) with high quality and best price for large quantity.For specifications,price and futher information,please freely contact us through email.
