Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould. Features of platinum cure molding rubber silicone rtv 1. Good characteristics of easy-operation 2. Light viscosity and good flowability 3. Low shrinkage 4. Favorable tension 5. No deformation 6. Favorable hardness 7. High temperature resistance, acid and alkali-resistance and ageing resistance 8. Food grade, non-toxic Datasheet of platinum cure molding rubber silicone rtv ModelColorMixing ratioPot life (mins)Demouled time (hrs)Hardness(A0)Tensile-strength (kgf/cm2)Tear-strength (kgf/cm)Viscosity (cps)Elongation (%) HY-E625translucent1 : 130-604±125±235±225±26000±3000?¥400 HY-E630translucent1 : 130-604±130±240±223±27000±3000?¥395 HY-E635translucent1 : 130-60 4±135±247±2 22±28000±3000470
Application of Medical Grade liquid silicone rubber for shoe insoles The product is a two component high elongation silicone gel designed for silicone food care products, such as silicone insole. This product cured at room temperature to a soft track gel with the addition of curing agent. The soft nature and cushioning effect offer this product provides excellent protection for our food health care. Technique Data of HY-Q625# Medical Grade liquid silicone rubber for shoe insoles Model HY-Q625 Appearance Transparent Mixing Ratio 1:1 Operating time (Mins 25°C) 30-40 Curing time (Mins 25°C) 2-4h Hardness (A°) 25±2 Density ( g/cm 3 ) 1.08 Viscosity (CS) 6000 ± 2000 Tensile-strength( kgf/cm2 ) 3.3 Tear-strength (kgf /cm ) 8±2 Elongation-break(%) 420 Retractility(%) ?¤0.1 Features of Medical Grade liquid silicone rubber for shoe insoles 1.convenient 1:1 mixed ratio by weight 2. high elongation gel 3. low viscosity easily pourable 4.room temperature vulcanized and heat acceleration 5. soft track and selcky gel 6. absorbs shock and protets delicate mechanical component 7. no creativ by product, no concerns nogarding corrosion
China liquid Silicone mold making material for concrete/artificial stone casting Artificial Stone & Concrete Casting Silicone Rubber 1. Description C-825/C-830/C-835 Silicone Rubber is a two-part, tin-catalyzed, liquid silicone system that cures (RTV) to a white, Shore A25-A35 rubber. This is a pourable rubber, but it can be easily thickened with Liquid Thickener or for brush-on application. Popular product options is C-825/C-830/C-835 are the mold material of choice for high-volume veneer stone production (manual or automated manufacturing). These two-component mold rubbers capture excellent surface detail, offer exceptional dimensional stability and have unmatched lifetime and durability compared to hot melt and polypropylene systems. Molds made from these room temperature curing systems can be completed in a much shorter timeframe (~4 hour demold) compared to latex rubber molds. When properly maintained, these molds can last for years and produce thousands of stones. 2. Technical Datasheet Note: This is a 100A:3B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise. 3.Application
Factory price rtv2 silicone rubber for crafts molding Crafts Molding Silicone 1.Description 2. Technical Datasheet Typical general characteristics Inspection MethodValue Product data (Catalyzed A+B)C-820C-825 HardnessShore A20±225±2 Mix RatioA:B100:3100:3 Color/WhiteWhite Pot life25 °C (77F)30-40mins30-40mins Curing time25 °C (77F)3-4 hours3-4 hours Mixed viscositymPa.s16000±100020000±1000 Tear-strengthkg/cm20±222±2 Tensile-strengthM.pa3.6±0.54.0±0.5 Elongation%400±50450±50 Shrinkage%?¤0.3?¤0.3 Note: This is a 100A:3B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise. 3. FEATURES Low viscosity,great flexibility,Extra low shrinkage,Chemical resistance,release properties, Easy to work with,High tear strength,Heat Resistance,various color is available,High reproduction rate 4.SHELF LIFE: When stored at or below 32°C (89.6°F) in the original unopened containers, C-8 series Silicone Base and its Curing Agents have a usable life of I0 months. 5.Package Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum. Curing Agent: 30g/bottle; 1kg/bottle
Cheap liquid silicone rubber to make molds for lost was casting Lost Wax Casting Silicone 1.Description GC RTV silicone C-825 are good for lost wax casting. They are widely used for lost wax process of bronze casting to make accurate reproductions of original sculpture. 2. Technical Datasheet Typical general characteristics Inspection MethodValue Product data (Catalyzed A+B)C-825 HardnessShore A25±2 Mix RatioA:B100:3 Color/White Pot life25 C (77F)30-40mins Curing time25 C (77F)3-4 hours Mixed viscositymPa.s20000±1000 Tear-strengthkg/cm22±2 Tensile-strengthM.pa4.0±0.5 Elongation%450±50 Shrinkage%?¤0.3 Note: This is a 100A:3B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise. 3. FEATURES Low viscosity,great flexibility,Extra low shrinkage,Chemical resistance,release properties, Easy to work with,High tear strength,Heat Resistance,various color is available,High reproduction rate 4.Appearance Part A: Silicone rubber is a white liquid Part B: Catalyst is a non-toxic and odorless liquid, white transparent color. ATT: We can provide fast/medium/slow catalyst of for hot, warm or cold season. 5.SHELF LIFE: When stored at or below 32C (89.6F) in the original unopened containers, C-8 series Silicone Base and its Curing Agents have a usable life of I0 months. 6.Package Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum. Curing Agent: 30g/bottle; 1kg/bottle
China supplier Rtv mould making Silicone rubber for Taxidermy Molding Taxidermy Molding Silicone 1.Description 2. Technical Datasheet Typical general characteristics Inspection MethodValue Product data (Catalyzed A+B)C-810C-825C-830 HardnessShore A10±225±230±2 Mix RatioA:B100:3100:3100:3 Color/WhiteWhiteWhite Pot life25 °C (77F)30-40mins30-40mins30-40mins Curing time25 °C (77F)3-4 hours3-4 hours3-4 hours Mixed viscositymPa.s6000±100020000±100023000±1000 Tear-strengthkg/cm12±222±223±2 Tensile-strengthM.pa2.0±0.54.0±0.55.0±0.5 Elongation%320±50450±50460±50 Shrinkage%?¤0.3?¤0.3?¤0.3 Note: This is a 100A:3B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise. 3. FEATURES 1.Low viscosit 2.great flexibility 3.Extra low shrinkage 4.Chemical resistance 5.release properties 6.Easy to work with 4.High tear strength 5.Heat Resistance 6.various color is available 7.High reproduction rate 4.SHELF LIFE: When stored at or below 32°C (89.6°F) in the original unopened containers, C-8 series Silicone Base and its Curing Agents have a usable life of I0 months. 5.Package Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum. Curing Agent: 30g/bottle; 1kg/bottle
1.100% food grade platinum silicone, does not contain any toxic substances on the human body to meet the ROHS, SGS and UL environmental requirements certification. 2.Easy to clean, reusable, long service life. 3. Non-slip, shock, impermeable water, heat, not aging, easy to fade. 4.Temperature range:Heat resistant to 260°C / Freezer Proof to -40°C 5.Color, style and diverse, according to customer requirements to customize the color of different products. Product Name 2017 Popular dog bone shape or other different Shape silicone ice cube tray Material : 100%Food Grade Silicone Color: Pantone Color Size:Customized Size Feature Eco-Friendly, Stocked Packaging Opp bag Service : OEM Why Choose us ? 1.Our value massage is'' Quality is our culture'' 2.Our core competencies is silicone products ,graphite products ,and thermal products 3.With us your money in a safe your bussiness in safe. 4.Competitive advantage products 5.Condidentiality agreement Bussiness Secrect Contract" 6.Free sample offer ; small order welcomed 7.Quality assurance contarct Packing&Delivery Within 5-15 working days after your payment Packing Details :Standard ; customized Port: Shenzhen or other ports in China 2017 Popular dog bone shape or other different Shape silicone ice cube tray Our Certifications Q: Are you trading company or manufacturer A: We are manufacturer Q: How long is your delivery time A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity. Q: Do you provide samples is it free or extra A: Yes, we could offer the sample for free charge but do not pay the cost of freight. Q: What is your terms of payment A: Payment=1000USD, 30% T/T in advance ,balance before shippment. If you have another question, pls feel free to contact us as below:
Sulphur Granules originTurkmenistan.FOB price Bender-Abbas IRAN Port
Model530 Colorwhite Mixing ratio (%)2% Pot life (mins, under 2530-40 Curing time(hrs, under 25)3-4 Hardness ( shore a )30±2 Tensile-strength (mpa)4.2 Tear-strength (kn/m)26±2 Viscosityafter a/b mixed , mpa.S27000±2000 Shrinkage rate (%0.2% Elongation450
Silicon-carbon alloy is a new type of alloy for converter, customers choose this to, replace most of ferrosilicon, silicon carbide and recarburizer, Used in converter, smelting deoxidation alloying process The characteristics Reduce the cost of steelmaking, increase economic, efficiency, improve product quality, stable performance, improve the quality of, molten steel, improve product performance, reduce the amount of alloy added,, reduce the cost of steel and increase economic efficiency.
Silicon carbide (SiC), also known as carborundum, is a compound of silicon and carbon with chemical formula SiC. It occurs in nature as the extremely rare mineral moissanite. Silicon carbide powder has been mass-produced since 1893 for use as an abrasive. Grains of silicon carbide can be bonded together by sintering to form very hard ceramics that are widely used in applications requiring high endurance, such as car brakes, car clutches and ceramic plates in bulletproof vests.
The characteristics: Reduce the cost of steelmaking, increase economic efficiency, improve product quality, stable performance, improve the quality of molten steel, improve product performance, reduce the amount of alloy added, reduce the cost of steel and increase economic efficiency. Silicon carbon alloy instead of ferrosilicon, silicon carbide, recarburizer, reducing the amount of oxygen scavenger, a converter for deoxidizing alloy, the effect of stability, steel chemical composition, mechanical properties and internal quality are better than the traditional process. By testing and production shows that using Si-C alloy to converter deoxy-alloy process, greatly reduce the cost of steel, creating considerable economic benefits, improve the market competitiveness of steel. The effect of using a silicon-carbon alloy species 1, can replace ferrosilicon and carburant, FeALSi dosage is also reduced, can effectively reduce the cost of steel 6-10 yuan / ton steel 2, smelting carbon steel, special steel and some low-alloy steel, the effective recovery of effective elements.
Ferro silicon is used as an essential alloy in the production of steel and cast iron. Ferro silicon is used to remove oxygen from steel and as alloying element to improve the final quality of the steel. Ferro silicon can also be the basis for manufacture of pre-alloys like magnesium ferro silicon (fesimg), used for modification of melted malleable iron. Main markets are the worldwide producers of alloyed, stainless and carbon steel. One of the fastest growing categories within steel is the stainless sector, in both flat and long products. Stainless steel has a specific consumption of ferro silicon 510 times higher than regular carbon steel. Special ferro silicon grades, like low al, high purity and low c ferro silicon, are used in the production of special steel qualities. Compared to regular ferro silicon, special grades of ferro silicon will help to keep both the content of inclusions and the carbon content in the final steel at very low levels. Ferro silicon is produced in submerged arc furnaces, using as raw material high-purity quartz, charcoal and iron ore.
The main grades our products cover: Grade Si Fe(max)Al(max)Ca(max)P(max) 553 98.5%min 0.50% 0.50% 0.30% 441 99% min 0.40% 0.40% 0.10% 421 99.2% min 0.40% 0.20% 0.10% 3303 99.3% min 0.30% 0.30% 0.03% 50ppm 2202 99.5% min 0.20% 0.20% 0.02% 40ppm Packing: In 1mt big bags Shipment: With in 15 days after comfirming the order Apperance:Dark gray Physical Property: High melting point and resistivity, good heat resistance and good anti-oxidation effect. Particle Size: (10-100)mm. Application and use: 1. Used in aluminum: An additive to aluminum alloys, silicon is used to increase the fluidity and tenacity of Aluminum and its alloys, which enjoy good castability and weldability accordingly. 2. Used in organic chemicals: Silicon metal is used in manufacturing a number of sorts of silicones, resins, and lubricants. 3. Used in electronic parts: Silicon metal is used in producing monocrystalline and polycrystalline silicon of high purity for electronic parts, such as semi conductors, etc.
Silicon is the material most commonly used in the manufacturing of photovoltaic (PV) cells. In the current study, laboratory experiments of purification of solar cell silicon materials through filtration are carried out. All such of manufacturing process We supplies a Silicon metal in various form and Selling(exporting) to China, Eastern Europe, Russia and India. Description Crystalline silicon is a lustrous, Black-greyish color, while the Amorphous form of silicon is a dark brown powder. Making up 25% of the earth's crust, silicon metal is the second most abundant element, following oxygen. Silicon is not found freely in nature, but can form more compounds than any other element, except carbon. It is a most important to semi conducting elements. Silicon and its compounds have some of the most useful mechanical, thermal, optical, and electrical properties to mankind. Shreeya International also cater to various Aluminium Alloy manufacturers for various grades of Silicon.
Yellow silicone ring, in simple terms, the silicone ring made of yellow color. The color of the silica gel circle, can make any color, transparent, red, green, blue, black, white, translucent, and so on, products include silicone o-rings, silica gel, silica gel ring U, silica gel, silica gel Y type V circle, silicone rectangular circle, etc. The silicone ring is a ring!Silica gel is a kind of rubber material, wide because of its special properties of heat resistance, excellent chemical resistance, together with the fluorine rubber was thus became a special rubber.Silicone is widely used in making all kinds of seals, including silicone RING, silicone O - RING, silicone sets, etc. Silicone ring has excellent heat resistance, low temperature flexibility and special excellent oxidation and ozone resistance, high permeability and selectivity of gas through.Good electrical insulating properties (volume resistance is greater than 10 cm, breakdown voltage in more than 30 kv/mm), corona resistance and arc resistance.But add a conductive carbon black, nickel powder, aluminum powder, silver powder, and can get the appropriate electrical conductivity (volume resistance to 5-0.02 euro. Cm).The surface of the silica gel circle can lower, with moisture absorption and isolation effect.Water resistance, but poor resistance to water vapor, the pressure more than 50 psi is not recommended.Compatible with most of the oil, chemicals and solvents.General silicone rubber acid-proof alkaline, polar solvent resistance, resistance to hydrogen alkanes and aromatic oils.Not recommended for most concentrated solvent, oil, concentrated acid and diluted caustic soda solution.Special silicone rubber has radiation resistant, flame resistant, oil resistant performance.Its low tensile strength, abrasion resistance is weak, is generally not used for dynamic seal. The silicone ring is based on the silicon from quartz, and adhered to by the silicon atoms such as methyl, vinyl side chain to form a saturated nonpolar rubber.The different side chains can lead to silicone rubber with different properties.Methyl vinyl silicone rubber (VMQ) is a kind of silicone rubber material application. -
Characteristics The industrial silicon powder is also called metal silicon powder. It is silver grey or dark grey powder and appears metallic luster. Its characteristics are high melting point, good heat-resisting, high resistivity and excellent anti-oxidation. It's well known as the industry gourmet powder used as the indispensable basic raw materials of a lot of high-tech products. Application Industrial silicon powder is widely applied to the refractory material, powder metallurgy industry so as to improve the products heat-resisting performance, wear resistance and oxidation resistance. The products of the refractory material, powder metallurgy industry are used in the steelmaking furnace, kilns, etc. Standard Size: 200Mesh; 325Mesh; etc The packaging and granular size can be produce according to customer demand. Si Fe Al Ca 98.5% 0.5% 0.5% 0.3% 99.0% 0.4% 0.4% 0.1% 99.0% 0.3% 0.3% 0.03% 99.0% 0.2% 0.2% 0.02%
Characteristics Ferro Silicon Magnesium nodulizer ( FeSiMg ) uses the advanced smelting craft production the nodulizer product, the organization is compact, the ingredient is stable, does not have the deflection evenly, the MgO content is low.The spheroidization response is steady, the magnesium absorption rate is high, the anti-decline time is long. After spheroidizing, the stone ball not a strike circle entire, tiny, the tendency is small. Strong spheroidizing ability, stable composition and reaction. Application Ferro Silicon Magnesium nodulizer ( FeSiMg )Used for nodular cast iron, adding hot metal can play a role in spheroidizing, desulfurization and outgassing. It can also improve the molten iron purity; generate compound insoluble in water with arsenic, zinc, tin, lead and other low melting point impurity. Standard Grade Chemical Composition (%) Mg Re Si Ca Al Ti Fe FeSiMg5Re2 4.0-6.0 1.0-3.0 38-44 2.0-3.0
Characteristics 1.Calcium Silicon Barium Inoculant ( CaSiBa ) increase the graphitization core, refinement of graphite, promote get A type graphite from the Grey iron castings, increase the intensity, for ductile iron parts, it can make the graphite in ductile iron ball small, round, improve the nodulizing grade. 2.Calcium Silicon Barium Inoculant ( CaSiBa ) effectively reduce molten iron super-cooling degree, promote the precipitation of graphite, significantly reduce chilling tendency, reduce the relative hardness, improve casting machinability. 3.Calcium Silicon Barium Inoculant ( CaSiBa ) easy to dissolve and absorb than the average inoculant. can reduce the gascontent in the molten iron. 4.Calcium Silicon Barium Inoculant ( CaSiBa ) hight ability to recession-proof. at the same time it prevent relevant nodulizing decline, wall thickness sensitivity is small, well-closed formation. Standard GradeChemical Element (%) SiCaBaAlPS â?¥(Min)â?¤(Max) Ca10Si50Ba1350.010.013.03.00.050.05 Ca13Si45Ba1045.013.010.0 Ca11Si45Ba1345.011.010.0 Ca9Si45Ba1345.09.010.0 Ca7Si45Ba1545.07.015.0 Ca5Si45Ba1545.05.015.0 The specification,packaging and granular size can be produce according to customer demand.
Characteristics Ferro Silicon ( FeSi ) used as deoxidizer and alloying agents in the steel industry. In order to obtain qualified chemical composition and guarantee the quality of steel, in the last stage of the steel must be deoxidized. The chemical affinity between silicon and oxygen is very large, Thus ferrosilicon is strong deoxidizer used in sedimentation and diffusion deoxidation of steel-making. Add a certain amount of silicon in the steel, can significantly improve the strength, hardness and elasticity of steel. Standard GradeChemical Element (%),, SiAlSPC â?¥(Min)â?¤(Max), FeSi65652.00.020.040.2 FeSi70702.00.020.040.2 FeSi72722.00.020.040.2 FeSi75752.00.020.040.2 Size: 10-50mm; etc. The content packaging particle size may be based on customer demand production.
