Crimped steel fiber is a low carbon, cold-drawn steel wire fiber designed to provide temperature and shrinkage crack control, strengthen flexural reinforcement, increase shear strength and improve crack resistance of concrete. It has excellent tensile, bending and shearing strength, high tenacity, and resistance against cracking, impact and fatigue. Crimped steel fibers are low-carbon, cold-drawn steel wire fibers designed to provide temperature and shrinkage crack control, strengthen flexural reinforcement, increase shear strength, and improve crack resistance of concrete. Crimped steel fiber conforms to the standards outlined in ASTM C1116 (Standard Specification for Fiber Reinforced Concrete and Shotcrete) and ASTM A820 Type V (Standard Specification for Steel Fibers for Fiber Reinforced Concrete). These coarse steel fibers not only enhance impact resistance, shatter resistance, fatigue resistance, and abrasion resistance but also contribute to increasing the overall toughness of the concrete. The recommended dosage ranges from 25 to 100 lb/cubic yards (15 to 60 kg/m3), depending on the specific reinforcement requirements of the project. Crimped steel fiber is widely used for buildings, road surfaces, bridges, tunnels, airport road surfaces, water conservancy projects, military engineering, and all kinds of building products.
Refractory AISI 304 stainless steel fiber is a type of reinforcement material that is made from AISI 304 stainless steel, which is a commonly used stainless steel alloy. The 304 Stainless Steel Fiber has resistance to high temperatures and can withstand thermal stress. Refractory AISI 304 stainless steel fiber is a type of reinforcement material that is made from AISI 304 stainless steel, which is a commonly used stainless steel alloy. The 304 Stainless Steel Fiber has resistance to high temperatures and can withstand thermal stress. AISI 304 stainless steel is a non-magnetic and austenitic stainless steel known for its corrosion resistance and versatility. When used in fiber form, it can enhance the mechanical properties of various materials, especially in applications where high temperatures or harsh environmental conditions are present. These stainless steel fibers are often added to refractory materials such as concrete or ceramics to improve their strength, durability, and resistance to thermal expansion and contraction. The use of AISI 304 stainless steel in the fibers provides corrosion resistance, making them suitable for applications in which exposure to corrosive environments is a concern.
Best quality and price Manufactured with update standard and best material Section: from 100mm to 300 mm based on buyer demand Delivery term: CFR- FOB-EXW Payment method: TT MOQ: 25 TONS For making order and more information please send message
steel products supplied by Centerway have been widely applied in engineering projects such as oil and gas extraction, pipeline transportation, urban pipeline network construction, building construction, coastal and port construction, food and medicine factory construction.Our partners are throughout southeast Asia, the Middle East, Europe, Africa, South America, Oceania,and more than 100 countries and regions. We also provide many steel pipe products and services to the worlds top 500 petroleum and gas , EPC companies, such as: PetroChina, Schlumberger, ADNOC, NNPC, ENI, NICO, EGPC, OXY, CCED, OGDCL, PEMEX, etc.
Aluminum sheet refers to a rectangular frame sheet made by rolling aluminum ingots. It can be pure aluminum sheet or aluminum alloy sheet. According to different application requirements, aluminum sheet can also be divided into different types such as thin aluminum sheet, medium thick aluminum sheet and pattern aluminum sheet. . Aluminum sheets have the characteristics of good light weight, corrosion resistance and thermal conductivity, so they are widely used in construction, automobile, aviation and other fields. The cross-section of the aluminum sheet is rectangular and the thickness is uniform, and when the thickness is greater than 0.2mm, it is usually delivered in a flat shape. Additionally, aluminum panels are often trimmed by shearing or sawing before delivery. Aluminum sheet uses: 1. Construction field. Aluminum panels are used to make building curtain walls, ceilings, interior and exterior wall decorations, etc. They have good fire protection and anti-corrosion properties and are suitable for exterior and interior decoration of high-rise buildings, commercial buildings, airport terminals, squares, stadiums and other buildings. 2. Transportation field. Aluminum sheets are used to make car bodies, roofs, windshield frames and other components. Because of their light weight and high strength, they help improve the fuel efficiency and safety of cars. 3. Electronic field. Aluminum sheets are used to make casings, heat sinks, circuit boards, etc. of electronic products. Due to their conductivity and corrosion resistance, aluminum circuit boards are widely used in electronic products. 4. Packaging field. Aluminum sheets are used to make food packaging, cosmetic packaging, etc., and have good moisture-proof, anti-oxidation, and fresh-keeping properties. 5. Aerospace field. Aluminum sheets are used to manufacture exterior panels, fuel tanks, boosters, etc. for aircraft, satellites, and other equipment. Because of their high strength, light weight, and corrosion resistance, aluminum materials have been widely used in the aerospace field. 6. Other fields. Aluminum sheets can also be used for mechanical parts processing, mold manufacturing, chemical pipeline wrapping, etc. Advantages of aluminum sheets: 1. Low density 2. Good electrical and thermal conductivity 3. Uniform coating and various colors 4. Easy to process 5. Strong corrosion resistance
Dairy products have complex components and are easily affected by temperature, oxygen, light, microorganisms, mechanical effects, etc., which can lead to product discoloration, oxidation, damage, and deterioration, thereby shortening the shelf life. Therefore, packaging not only needs to have high barrier properties, but also needs to be convenient for consumption and beautiful. The silver tin foil on the yogurt lid is aluminum foil, which is sealed with aluminum foil and has the advantages of heat insulation, moisture-proof, hygiene, and long storage time. Aluminum foil's compatibility with heat-seal coatings, coupled with its excellent thermal conductivity and stability, make it an ideal material for sealing all types of plastic milk containers. The silver tin foil on the yogurt cover is aluminum foil. The aluminum foil seal is not only heat-insulating, moisture-proof, hygienic, easy to open, and has a long storage time, but also improves the quality of the yogurt product. Milk cover foil is mainly made of 8 series alloy, such as 8011 cover foil. The 8011-o aluminum foil produced by Hongchang Aluminum is non-toxic, tasteless, safe and hygienic, with a clean surface and uniform color. It is very suitable for making yogurt lids. At the same time, the 8011 aluminum foil reaches A level for brushing, has excellent moisture-proof performance and high shading. Barrier ability, extending the storage time of yogurt.
Iron ore (Fe) 66.70% (Cu) 0.002
Upset Parallel Threaded Rebar Coupler 100% bar break through tensile test. Material of the rebar coupler is No.45 steel. High precision thread, full thread type, no false thread.
Diameter = 20-32mm Inner Diameter = 1100mm Outer Diameter = 1450mm Contact us with your specific requirements or for detailed product specification today.
We are specialized in raw materials of electric cable , optical cable and data cable. Also we are the one of the suppliers of Prysmian. we provide: 1)Insulation tape: mica tape, LSZH tape, PP/water blocking tape, mylar tape/PET , Semi-conductive water blocking tape,etc. 2)Metal Tape: copper tape, plastic coated steel / aluminum tape ,copper / aluminum foil mylar tape, etc. 3)Medium and high voltage cable material: XLPE , semi-conductive nylon shielding tape, Semi-conductive water blocking tape,copper tape, etc. We believe our product quality ,sales service will meet your requirements. please don't hesitate contact us!
The parameters of standard Upsetting couplers : Size 16 18 20 22 25 28 32 36 40 Material of the rebar coupler is No.45 steel.
Rebar Coupler The splicing couplers model is divided into 9 categories according to the Rebar Coupler. (Unit: mm) 1).The parameter of couplers Size(mm) O D�±0.5ï¼?mmï¼? Threadï¼?mmï¼? L�±0.5 (mm) Pitch Rib peeling coupler weight/pc (kg) Thread Angle �¦16 25 M16.5 40 2.0 0.111 60 Degree �¦18 28 M18.5 45 2.5 0.136 �¦20 31 M20.5 50 0.175 �¦22 33 M22.5 55 0.203 �¦25 37 M25.5 60 0.266 �¦28 41 M28.6 70 3.0 0.375 2).The Characteristics of the Usage Mode usage occasion Standard Model used in the occasion for connecting the steel bar in normal situation Different Diameter Model used for connecting the steel bar in different diameters Flared Model used for the steel bar which was hard to match Positive And Negative Screw Thread Model Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted. Locking Nut Model Used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut. 3).The material of the splicing coupler The material of the splicing coupler is constructional quality steel of No.45 steel.
The NM series quenched and tempered steel produced is thin ingauge,good in shape, with sta-ble property and quality as well as high production efficiency.This series of product is applied to medium and heavy truck,dump truck,garbage collection truck, concretemixer,industrialfan,hop perand crushed aggregates etc..HIGH WEAR RESISTANCE STEEL:( HARDOX 400, HARDOX 450. HARDOX 500, HARDOX 600 ) .ABRASION RESISTANT STEEL:(DILLIDUR 400,DILLIDUR 450,DILLIDUR 500,DILLIDUR 600,XAR400,XAR450,XAR500,XAR600,GR130).ABRASION RESISTANT PLATE:(NM400,NM450,NM500,NM600,NM600+,MN13) .WEAR RESISTANCE STEEL JEF-EH400(K400N),JEF-EH450(K450N),JEF-EH500(K500N),JEF-EH600(K600N .BULLETPROOF STEEL
65MN also called cutting tools steel,its modulus of elasticity is excellent, not easy become fatigue after thousands vibrating.After property heat treatment,65MN steel will gain different hardness. Different hardness has different performance such as sharp , hard, or elasticity.we Deals in: SPECIAL STEEL 1.MEDIUM-HIGH CARBON STEEL:( AISI1010,1020,1035,1045,1050,1055,CK45,XC45,XC48TS,XC55 ) 2.HIGH CARBON STEEL:(S10C,S20C,S35C,S45C,S50C,S55C) 3.HIGH WEAR RESISTANCE STEEL:( HARDOX 400, HARDOX 450. HARDOX 500, HARDOX 600 ) 4.ABRASION RESISTANT STEEL:(DILLIDUR 400,DILLIDUR 450,DILLIDUR 500,DILLIDUR 600,XAR400,XAR450,XAR500,XAR600,GR130) 5.ABRASION RESISTANT PLATE:(NM400,NM450,NM500,NM600,NM600+,MN13) 6.WEAR RESISTANCE STEELï¼?JEF-EH400(K400N),JEF-EH450(K450N),JEF-EH500(K500N),JEF-EH600(K600N)ï¼? 7.BULLETPROOF STEEL 8.SPRING STEEL(65MN,40MN,65�³,40�³ï¼?ASTM AISI JIS 1566) 9.CORTEN STEEL(Q235NH,Q295NH,Q295GNH,Q345NH,Q355NH,Q355GNH,Q460NH, 09CuPCrNi-A,Q345NQR2,Q450NQR1,09CrCuSB,Q345NS,CORTENA,A606,A588,WTST37-2) 10.DIE STEEL Like :( 40CR,42CRMO), 11.HEAT RESISTING STEEL:( 12CR1MOV,12X1W ,A335-P11,A369-FP12,A199-T11,A213-T11,24CRMOV55,SUS310)
Weathering Steel contains appropriate amount of anti-corrosion elements, such as Cr, Ni, Cu and P, and has good corrosion resis- tance. The corrosion resistance is 2.28 to 2.6 times of that of common carbon steel, reaching the level of the same kind of steel of foreign. At the same time, it has perfect impact toughness and cold working performance, with small sensitivity of cold and hot cracks and excellent welding performance; it has high dimension precision, flat plate, and smooth surface and excellent coating performance.we Deals in: SPECIAL STEEL 1.MEDIUM-HIGH CARBON STEEL:( AISI1010,1020,1035,1045,1050,1055,CK45,XC45,XC48TS,XC55 ) 2.HIGH CARBON STEEL:(S10C,S20C,S35C,S45C,S50C,S55C) 3.HIGH WEAR RESISTANCE STEEL:( HARDOX 400, HARDOX 450. HARDOX 500, HARDOX 600 ) 4.ABRASION RESISTANT STEEL:(DILLIDUR 400,DILLIDUR 450,DILLIDUR 500,DILLIDUR 600,XAR400,XAR450,XAR500,XAR600,GR130) 5.ABRASION RESISTANT PLATE:(NM400,NM450,NM500,NM600,NM600+,MN13) 6.WEAR RESISTANCE STEELï¼?JEF-EH400(K400N),JEF-EH450(K450N),JEF-EH500(K500N),JEF-EH600(K600N)ï¼? 7.BULLETPROOF STEEL 8.SPRING STEEL(65MN,40MN,65�³,40�³ï¼?ASTM AISI JIS 1566) 9.CORTEN STEEL(Q235NH,Q295NH,Q295GNH,Q345NH,Q355NH,Q355GNH,Q460NH, 09CuPCrNi-A,Q345NQR2,Q450NQR1,09CrCuSB,Q345NS,CORTENA,A606,A588,WTST37-2) 10.DIE STEEL Like :( 40CR,42CRMO), 11.HEAT RESISTING STEEL:( 12CR1MOV,12X1W,A335-P11,A369-FP12,A199-T11,A213-T11,24CRMOV55,SUS310)
40Cr steel, after quenching and tempering treatment, has good comprehensive mechanical properties, good low-temperature impact toughness, and low notch sensitivity. The hardenability of steel is good, it can be quenched to 28-60mm in water and 15-40mm in oil. This type of steel is suitable for cyanide and high-frequency quenching treatment in addition to quenching and tempering treatment. The cutting performance is good, with a relative machinability of 60% when the hardness is between 174-229HB. This steel is suitable for making medium-sized plastic molds. 42CrMo steel belongs to ultra-high strength steel, which has high strength and toughness, good hardenability, no obvious tempering brittleness, high fatigue limit and resistance to multiple impacts after quenching and tempering treatment, and good low-temperature impact toughness. 42CrMo steel is suitable for manufacturing large and medium-sized plastic molds that require certain strength and toughness.
Aluminum alloy is the most commonly used cookware material in the world because of its light weight, fast thermal conductivity, and easy processing and shaping. Most non-stick pans of all types also use aluminum alloy as the base material. Aluminum discs are used to make kitchen utensils, and the use of new materials has become very mature. 1050, 1060, 1100, 3003 aluminum rounds, etc., have good electrical conductivity, thermal conductivity and heat resistance, and are widely used in the production of aluminum pots and pans around the world. Advantages of aluminum discs for non-stick pans: 1. Excellent elongation and tensile strength; 2. Good processing performance, high stamping and stretch forming performance; 3. Gas welding, hydrogen welding, resistance welding, and brazing; 4. High plasticity, electrical conductivity and thermal conductivity; 5. Easy to carry out various pressure processing, extension and bending processing; 6. Excellent corrosion resistance and strong anti-rust properties. The 3003 aluminum discs produced by Hongchang Aluminum are aluminum alloy materials that meet the performance requirements of non-stick pans. The 3003 aluminum discs are a typical Al-Mn alloy. This material has good formability, very good corrosion resistance and Weldability. The non-stick coating in the non-stick pan produced with it should be smooth, the color, covering power and gloss should be basically uniform, without bubbles and falling off, and the coating is completely hot-melted, without obvious defects such as dirt, cracks and explosions.
Ferrite-Pearlite ductile iron is a type of ductile iron known for its high strength and toughness, with its primary microstructure consisting of ferrite and pearlite. This material exhibits excellent wear resistance and corrosion resistance, as well as high fracture toughness and ductility. It finds wide applications in various industries: In the mechanical manufacturing sector: Manufacturing components such as machine tool bodies, mechanical parts, reducers, and hydraulic cylinder sleeves. In the automotive manufacturing sector: Manufacturing components such as cylinder blocks, cylinder head covers, and crankshafts for automotive engines. In the energy sector: Manufacturing components such as turbochargers, centrifugal pumps, and gears. With continuous technological advancements, it is believed that Ferrite-Pearlite ductile iron will continue to find increasingly widespread applications in the future.
High-silicon molybdenum ductile iron (5% silicon content) finds extensive applications in high-temperature castings for automotive engines, particularly in exhaust systems (e.g., exhaust pipes, turbocharger housings, valve bodies, valve discs, etc.). This is primarily due to its excellent properties including high-temperature resistance, thermal fatigue performance, outstanding oxidation resistance, and good high-temperature creep resistance. Our company has now developed precision-cast high-silicon molybdenum ductile iron valve discs, valve bodies, and other castings, featuring high dimensional accuracy, delicate appearance, and excellent performance, which have been utilized in exhaust systems for heavy-duty trucks.
High-silicon molybdenum ductile iron (5% silicon content) finds extensive applications in high-temperature castings for automotive engines, particularly in exhaust systems (e.g., exhaust pipes, turbocharger housings, valve bodies, valve discs, etc.). This is primarily due to its excellent properties including high-temperature resistance, thermal fatigue performance, outstanding oxidation resistance, and good high-temperature creep resistance. Our company has now developed precision-cast high-silicon molybdenum ductile iron valve discs, valve bodies, and other castings, featuring high dimensional accuracy, delicate appearance, and excellent performance, which have been utilized in exhaust systems for heavy-duty trucks.
