Cast aluminum-magnesium alloy
Category:Aluminum alloy casting
Cast Aluminum-magnesium alloy are widely used in the fields of electronics, automobiles, and aerospace. Common grades are 7A09 etc.
The main elements of aluminum-magnesium alloy include aluminum and magnesium. The alloy products have high strength, low density and strong heat dissipation capacity, so they are popular in the fields of electronics, automobiles, and aerospace. Common grades are 5052, 5754, 5083, etc. Aluminum alloys have lower cost, superior performance and stronger product competitiveness.
The density of aluminum-magnesium alloy is small, so it is lighter under the same volume, and has a certain strength, which can be used for load-bearing. Aluminum-magnesium alloy has strong heat dissipation, and at the same time, it can resist electromagnetic interference and has strong electromagnetic shielding. Its appearance has a certain degree of beauty, is resistant to corrosion, can maintain a good quality of appearance for a long time, and the material is environmentally friendly, and the waste is recyclable.
English name: Vanadium pentoxide (Powder)
Molecular formula: V2O5
Transport Hazard Class : 6.1
Grade Standard:Electron Grade, Industrial Grade, Reagent Grade
Executive standard: GB-7315.1-87
Appearance : orange-yellow, brick red crystalline powder
Application: Vanadium is widely used in steel, metallurgy, petrochemicals, rubber, enamel, aerospace, batteries, pigments, glass, optics, paint, electronics, medicine and many other fields.
We are Manufacturer of high grade Copper & Aluminium based Alloys Ingots, Billets
We manufacture all grades of Al & Cu Alloys viz. Gunmetal, Tin Bronze, Leaded Bronze, Manganese ,Phosphorous Bronze Aluminium Ingots etc as per JIS, BS, ASTM, DIN, IS, EN & UNI STD.
Product Description
Aluminium Alloy Grain Refiners(Aluminium based master alloys) Manufacturer in the world by far. STA was listed on the main board of the
produce a full range of products for the global Aluminium industry including Aluminium Alloy Grain Refiners, master alloys,alloy additives ,chemical fluxes .Consistent and excellent product quality is assured by independently certified quality and environmental management systems, modern laboratories and R&D facilities. With five wholly-owned subsidiaries ,so far the only company in the world that has established a complete industrial chain from the mining and processing of fluorite raw ore, the manufacturing of fluorine-container materials (K2TiF6,KBF4), and the production of Aluminium Alloy Grain Refiners,master alloys.
Our strengths
Consistent and excellent product quality is assured by independently certified quality and environmental management systems, modern laboratories and R&D facilities.
5052 aluminum coils is Aluminum-magnesium alloy aluminum coils. Mg is the main alloying element in 5052 aluminum coils. It is the most widely used rust-proof aluminum. The alloy is high in nature, especially fatigue resistance, plasticity and corrosion resistance, with high strength. It can not be heat-treated, the plasticity of it is good in semi-cold hardening. It s low in plasticity during cold hardening, and good in corrosion resistance with good weldability, poor machinability and polishing.
The main alloying element of 5052 aluminum sheet is magnesium, and aluminum-magnesium alloy also contains a small amount of Mn, Cr, Ni, Ti, etc. Most of the Mn in the alloy forms MnAl6 except for a small amount of solid solution. In the interior of the 5052 aluminum coils, the effect of Cr is similar to that of Mn, which improves the resistance to stress corrosion cracking, improves the strength of the base metal and weld, and reduces the tendency of weld cracking, but its content generally does not exceed 0.35%.
Surface Advantages of 5052 Aluminum coils:
1. surface of 5052 aluminum coils is not allowed to have cracks, corrosion spots and traces of nitrate.
2. The surface is allowed to have peeling, air bubbles, surface roughness. and it is also allowed to have local mechanical damage with a depth not exceeding 8% of the nominal thickness of the part where the defect is located. But the maximum depth of the defect shall not exceed 0.5 mm, and the total area of the defect shall not exceed the total area of the coils 5%.
3. Allow the supplier to illuminate the profile longitudinally to a smooth surface.
4. Other requirements: There are demanders and suppliers to draw up their own.
Application of 5052 Aluminum coils:
5052 aluminum coils is mainly used for high plasticity with good weldability. It is also commonly used in transportation vehicles, ship sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical enclosures, etc. It can also be used to manufacture aircraft fuel tanks, oil pipes, aerospace aluminum alloy materials, and is a typical rustproof alloy material.
The atates of 5052 aluminum coils includes F, O, H12, H14,, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114.
3003 aluminum coil is the most widely used aluminum alloy. It is made up of aluminum, copper, iron, manganese, silicon and zinc. It is commonly used because it has great resistance to corrosion and is moderately strong. The 3003 aluminum coil is 20% stronger than 1100 grade alloys because it is fused with manganese.
Because it s not heat treatable, it has to be strengthened using cold working alone.
The most common applications for the 3003 aluminum coil are for fuel tanks, sheet metal work and other types of projects that need a metal that is stronger than the 1100 series aluminum. In some cases, it is used for cooking utensils, refrigerator panels, gas lines, storage tanks, garage doors, builder s hardware and awning slats.
We are a direct supplier for high quality Aluminium ADC12 Quantity: 100-500 tons per month or 4 to 20 container
Payment term: FOB and CIF
Payment: TT in advance / 100% For any further information please feel free to contact us.
aluminum sheet
aluminum plate
Size: customized according to your requirements
The main products are as follows:
aluminum checker plate includes one/ single bar, two bar, three bar, small five bar, big five bar, pointer shaped, etc
1 - Series of aluminum alloy: 1050/1060/1070/1100/1235;
2- Series of aluminum alloy: 2A12 /2024;
3- Series of aluminum alloy: 3003/3004/3005/3104/3105;
4- Series of aluminum alloy: 4017;
5- Series of aluminum alloy: 5052/5754/5251/5182/5083/5086//5005;
6- Series of aluminum alloy: 6061/6063/6082/6016/6101;
7- Series of aluminum alloy: 7075;
8- Series of aluminum alloy: 8011/8021/8079/8006.
250 Metal Alloys Suppliers
Short on time? Let Metal Alloys sellers contact you.
