Description poultry house thermal oil heater products series Oil/gas heaters(Diesel or kerosene) 1. DH series(Output heat 23KW or 43KW) The burning heat was blowed out directly. Used in construction site or small industrial workshop, for temporary heating or drying. Can also be used in chicken brooding and pig conservation. DH25PV have a heat exch anger and a chimney, to exhaust tail gas. 2. Tornado series(Output heat 66KW or 115KW) This series have a special fan, can get oxygen from outside through vent and pipe. This can make burning more stable. 3. Mirage series(Output heat 36KW or 53KW or 84KW) This series have Oxygen fan can get oxygen from outside, and efficient heat exchanger, this can exhaust tail gas, making blow hot airs clean. Our special design is the air outlet have a baffle in no wind area, make outlet air strong, can blow further through the air-discharge pipe. 4. Helios series(Output heat 140KW/145KW/174KW/195KW) Helios using the isolated independent burner, burn oil or gas. Burning chamber is multipass exchange heat, the highest heat effiency, exhaust tail gas the same time. Our burner using the Riello(Italy brand) burner, more durable. Feature of the diesel fuel heater : 1. Robust and tough design 2. Function on diesel oil or kerosene 3. Stainless steel combustion chamber with fan cooling 4. Durable external powder coating 5. With flame sensor 6. If no oil , heater will cut off the power 7. Fixed Oil display 8. Cut-off protection,re-plugged in will not work automatically 9. Low pressure atomization,combustion completely 10. Waterproof class IPX4 11. With P.C.panel to smart setting temperature 12. Easy maintenance 13. Ideal for heating warehouses, factories and workshops
ASTM A214 / SA214 - Electric-Resistance-Welded carbon steel heat-exchanger and condenser tubes Tube details: 1. OD Size: 3/4In - 5in; 2. Month Capacity: 6000Ton; 3 A214 & SA214 Chemical Component Analysis(%): C: < 0.18; Mn: 0.27-0.63; P: < 0.035; S: < 0.035; 4. Rust prevention treatment, such as: Immersion oil, lacquer, passivation, phosphating, etc; 5. Inspection: Strictly according to the standard requirements and offer the original MTC (EN10204.3.1/3.1B) 6. Smooth surface, mechanical properties equilibrium, tightness tolerance. 7. Applications: Boiler and Heat Exchanger (Wal panel, economizer, reheater, superheater and steam pipeline of boilers), Hydraulic and Petrochemical Purpose, etc. 8. Place of orgin: China 9) e-mail: tubesolution at sina.com Commercial information: 1. Delivery: 35-55 days ready at mill; 2. MOQ: 15 ton/item tube while no stock raw material; 3. Packing way: As per our export standard with good protection for shipment; 4. Term of payment: T/T or L/C; 5. Delivery port: Shanghai port.
SB-111 Tube Heat Exchanger
Type bemname fixed tube-sheet heat exchangerproject name annual output of 600000 tons of methanol technical renovation projectstandard gb151
Cmep-ol oil free explosion proof refrigerant recovery machine is specially designed for light hydorcarbon refrigerants, such as r32, r600a and r290, etc.It's suitable for the service of household a/c, fridge and oil extraction. Product features: Specially designed for hc refrigerantion(r600/r600a/r290/r32, ect.) 1 hp oil-free dual cylinder high efficiency compressor Designed strictly according to the standard of exdiiat3 Ul certified explosion-proof motor Stainless steel design of compressor, condenser, pipes Compliance with food safety grade material ptfe Ul certification and patents pending Long time running sustainingly up to 24 hours One year warranty Specification: Model:cmep-ol Application refrigerant:r600, r600a, r290, r32, ect. Compressor:1hp oil-free dual cylinder compressor Compressor gas displacement:1.25cfm Recovery rate: ?¤ 71.6kg/h Voltage:220-240v/50-60hz, 115vac/60hz High pressure protection:2.5mpa Ultimate vacuum:0.05inhg Weight:43kg Package: Carton(for single set)/pallet
Cmep-ol oil free explosion proof refrigerant recovery machine is specially designed for light, hydorcarbon refrigerants, such as, r32, r600a and r290, etc.It's suitable for the service of household a/c, fridge and oil extraction. Product features:, Specially designed for hc refrigerantion(r600/r600a/r290/r32, ect.) 1 hp oil-free dual cylinder high efficiency compressor Designed strictly according to the standard of exdiiat3 Ul certified explosion-proof motor Stainless steel design of compressor, condenser, pipes Compliance with food safety grade material ptfe Ul certification and patents pending Long time running sustainingly up to 24 hours One year warranty Specification: Model:cmep-ol Application refrigerant:r600, r600a, r290, r32, ect. Compressor:1hp oil-free dual cylinder compressor Compressor gas displacement:1.25cfm Recovery rate: , , 71.6kg/h Voltage:220-240v/50-60hz115vac/60hz High pressure protection:2.5mpa Ultimate vacuum:0.05inhg Weight:43kg Package: Carton(for single set)/pallet
Cooling Tower Fill: CF500-S Width: 500mm Length: 1000mm or as your request Thickness: from 0.28mm to 0.45mm Profile height: 20mm 30mm or 35mm Material: Virgin PVC or PP Application: Used in thermal power plant concrete cooling
1. Introduction Genuine rubber gaskets ensure tighter seals, longer lifetime and more uptime for gasketed plate heat exchangers. Our gaskets may contain up to 30% more polymer than other gaskets, which contributes to optimal sealing. Don't be fooled by gaskets that are slightly thicker - thicker is not better. Incorrect thickness causes inaccurate tightening calculations, which may cause leakage and/or deformation and destruction of the complete plate pack. Their material are available for NBR, EPDM, HNBR, Viton, Viton G, Neoprene gaskets. 2. Packing&Delivery Package details: standard export plywood case & carton & customizing according to your requirements. Delivery time: within 10 working days after received the deposit and confirmed all details. 3.Our Advantages: a. Competent in manufacturing various types plates,such as Alfa-Lafa,GEA,FUNKE,Sondex,Thermowave, APV,Tranter,and also make plate mould according to customer requirements. b. High quality products, best services and competitive prices c. Large stock:We keep some regular models pares in stock, so fast delivery. d. Technical service: technical consultation, equipment update, capacity expansion scheme, maintenance and cleaning of the equipment. e. ISO9001&ISO14001: 2008 international quality&environment management standard certification f. Strict quality control systems, PHE: pressure testing; plates: size measuring, quality checking; gaskets:thickness/length/width measuring. 4. Application The product range is extremely wide and is used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation.
1.Introduction We are, at the same time , hydraulic press machine manufacturer, we make the mould then press the plates. Our plates are made using single-step pressing. This ensures uniform plate strength and thickness over the entire plate, dramatically reducing the risk of fatigue cracking.The correct material quality can make a huge difference to a process. We ensures that the correct material is specified according to its intended use. Plate materials available for 0.5 & 0.6mm 304ss, 316ss, titanium, asmo254, hastelloy c-276, nickel ni201, 904l. More details please contact us directly . 2.Packing&delivery Package details: standard export plywood case & carton & customizing according to your requirements. Delivery time: within 10 working days after received the deposit and confirmed all details. 3.Our advantages: A. Competent in suppling various types plates, and also make plate mould according to customer requirements. B. High quality products, best services and competitive prices. C. Large stock: we keep some regular models pares in stock, so fast delivery. D. Technical service: technical consultation, equipment update, capacity expansion scheme, maintenance and cleaning of the equipment. E. Iso9001&iso14001: 2008 international quality&environment management standard certification. F. Strict quality control systems, phe: pressure testing; plates: size measuring, quality checking; gaskets:thickness/length/width measuring. 4. Application? They are widely used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from hvac, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation.
1.Introduction We are, at the same time ,hydraulic press machine manufacturer, we make the mould then press the plates. Our plates are made using single-step pressing. This ensures uniform plate strength and thickness over the entire plate, dramatically reducing the risk of fatigue cracking.The correct material quality can make a huge difference to a process. We ensures that the correct material is specified according to its intended use. Plate materials available for 0.5 & 0.6mm 304SS, 316SS, Titanium, ASMO254, Hastelloy C-276, Nickel Ni201, 904L. More details please contact us directly . 2.Packing&Delivery Package details: standard export plywood case & carton & customizing according to your requirements. Delivery time: within 10 working days after received the deposit and confirmed all details. 3.Our Advantages: a. Competent in suppling various types plates, and also make plate mould according to customer requirements. b. High quality products, best services and competitive prices. c. Large stock: We keep some regular models pares in stock, so fast delivery. d. Technical service: technical consultation, equipment update, capacity expansion scheme, maintenance and cleaning of the equipment. e. ISO9001&ISO14001: 2008 international quality&environment management standard certification. f. Strict quality control systems, PHE: pressure testing; plates: size measuring, quality checking; gaskets:thickness/length/width measuring. 4. Application, They are widely used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation.
1. Introduction Genuine rubber gaskets ensure tighter seals, longer lifetime and more uptime for gasketed plate heat exchangers. Our gaskets may contain up to 30% more polymer than other gaskets, which contributes to optimal sealing. Don't be fooled by gaskets that are slightly thicker - thicker is not better. Incorrect thickness causes inaccurate tightening calculations, which may cause leakage and/or deformation and destruction of the complete plate pack. Their material are available for NBR, EPDM, HNBR, Viton, Viton G, Neoprene gaskets. 2. Packing&Delivery Package details: standard export plywood case & carton & customizing according to your requirements. Delivery time: within 10 working days after received the deposit and confirmed all details. 3.Our Advantages: a. Competent in manufacturing various types plates,such as Alfa-Lafa,GEA,FUNKE,Sondex,Thermowave, APV,Tranter,and also make plate mould according to customer requirements. b. High quality products, best services and competitive prices c. Large stock:We keep some regular models pares in stock, so fast delivery. d. Technical service: technical consultation, equipment update, capacity expansion scheme, maintenance and cleaning of the equipment. e. ISO9001&ISO14001: 2008 international quality&environment management standard certification f. Strict quality control systems, PHE: pressure testing; plates: size measuring, quality checking; gaskets:thickness/length/width measuring. 4. Application The product range is extremely wide and is used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation
1. Efficient heat transfer Gasketed plate-and-frame heat exchangers (GPHEs) provide efficient heat transfer in compact equipment with a small footprint - much smaller and more efficient than shell-and-tube heat exchangers. Plate heat exchangers are designed to optimize heat transfer, because the corrugated plates provide by far the greatest surface area through which the heat can be drawn from one gas or liquid to the other.The units also have a flexible design and are easy to service and maintain. 2. Types of gasketed plate heat exchangers Industrial -extremely versatile range of heat exchangers for use in all types of industries Industrial semi-welded -used in refrigeration when gaskets are not suitable for one of the media and when higher design pressures are needed WideGap -used for applications involving fibrous liquids, highly viscous fluids, and fluids containing coarse particles evaporators-tailor-made, rising film plate surface evaporator condensers -a compact, plate surface vacuum condenser Material available for 0.5 & 0.6mm 304SS, 316SS, Titanium, ASMO254, Hastelloy C-276, Nickel Ni201, 904L More details please contact us directly . 3. Packing&Delivery Package details: standard export plywood case & carton & customizing according to your requirements. Delivery time: within 10 working days after received the deposit and confirmed all details. 4. Our Advantages: a. Competent in suppling various types plate heat exchangers, and also make plate mould according to customer requirements. b. High quality products, best services and competitive prices. c. Large stock: We keep some regular models pares in stock, so fast delivery. d. Technical service: technical consultation, equipment update, capacity expansion scheme, maintenance and cleaning of the equipment. e. ISO9001&ISO14001: 2008 international quality&environment management standard certification f. Strict quality control systems, PHE: pressure testing; plates: size measuring, quality checking; gaskets:thickness/length/width measuring. 5. Applicationï¼? They are widely used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation.
1. Gasketed plate heat exchangers benefits Precision heat transfer - closer approach temperature, true counter current flow, 80-90% less hold-up volume Low overall cost - low capital investment, reduced installation costs, limited maintenance and operating costs Maximum reliability - less fouling, stress, wear and corrosion Environmentally responsible - minimum energy consumption for maximum process effect, reduced cleaning Easy to expand capacity - simply add or remove plates on the existing frame 2. Types of gasketed plate heat exchangers Industrial -extremely versatile range of heat exchangers for use in all types of industries Industrial semi-welded -used in refrigeration when gaskets are not suitable for one of the media and when higher design pressures are needed WideGap -used for applications involving fibrous liquids, highly viscous fluids, and fluids containing coarse particles evaporators-tailor-made, rising film plate surface evaporator condensers -a compact, plate surface vacuum condenser Material available for 0.5 & 0.6mm 304SS, 316SS, Titanium, ASMO254, Hastelloy C-276, Nickel Ni201, 904L More details please contact us directly . 3. Packing&Delivery Package details: standard export plywood case & carton & customizing according to your requirements. Delivery time: within 10 working days after received the deposit and confirmed all details.
1. Introduction Genuine rubber gaskets ensure tighter seals, longer lifetime and more uptime for gasketed plate heat exchangers. Our gaskets may contain up to 30% more polymer than other gaskets, which contributes to optimal sealing. Don't be fooled by gaskets that are slightly thicker - thicker is not better. Incorrect thickness causes inaccurate tightening calculations, which may cause leakage and/or deformation and destruction of the complete plate pack. Their material are available for NBR, EPDM, HNBR, Viton, Viton G, Neoprene gaskets. 2. Packing&Delivery Package details: standard export plywood case & carton & customizing according to your requirements. Delivery time: within 10 working days after received the deposit and confirmed all details. 3.Our Advantages: a. Competent in manufacturing various types plates,such as Alfa-Lafa,GEA,FUNKE,Sondex,Thermowave, APV,Tranter,and also make plate mould according to customer requirements. b. High quality products, best services and competitive prices c. Large stock:We keep some regular models pares in stock, so fast delivery. d. Technical service: technical consultation, equipment update, capacity expansion scheme, maintenance and cleaning of the equipment. e. ISO9001&ISO14001: 2008 international quality&environment management standard certification f. Strict quality control systems, PHE: pressure testing; plates: size measuring, quality checking; gaskets:thickness/length/width measuring. 4. Applicationï¼? The product range is extremely wide and is used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation.
SV bulk solid heat exchanger is a kind of heat exchanger using pillow plate to heat or cool bulk solid particle or powder. Technical features: 1.Dense phase conveying design: The speed and temperature of powder discharging is even and controllable, with stable and reliable quality. 2.Wall type heat exchange: Heat exchange medium exchanges heat with powder by high efficient pillow plate, no direct contact with powder. Product Advantages: 1.World leading laser welding pillow plate heat exchange technology: Pillow plate is laser welded by two plates all around and in the middle area full of weld flowers. After the forming process, the inner part of the heat exchange plate forms a pillow type cavity. Pillow design creates excellent turbulence and provides self supporting structure. In practical applications, the additional welding path is often added in the pillow heat exchange plate, in order to adjust and control the flow of fluid into and out of the heat exchange plate nozzle position, the fluid velocity and flow rate inside plate, so as to optimize the heat exchange effect. 2.Full closed operation with zero emission: In the process of using wall type heat exchange technology of SV bulk solid heat exchanger, there will be no direct air contact with bulk solid. So it fundamentally eliminates dust, fine particles and odor emissions, as well as prevent dust explosion effectively. 3.Saves energy up to 90%: Compared with the traditional heat transfer technology, the energy consumption of SV powder flow heat exchanger is decreased by more than 90% 4.Ensure superior product quality: The controllable low velocity when the powder passes through the heat exchanger can effectively prevent the wear and tear and decomposition of product. Also ensures the particle properties and crystal shape, so as to achieve the best product quality. 5.Even heat exchange effect: Based on dense conveying principle, powder in the heat exchanger flows evenly and in low speed, which ensures the even temperature of product discharging. Also the temperature of final product has good consistency. 6.Modular structure, easy to expand: The vertical structure of SV bulk solid is compact and modular. The processing amount could be adjusted by increasing or decreasing pillow plate quantity. It saves lots of installation space. 7.Compact structure, easy to install The wall type heat exchange and dense conveying designs means there is no need of high power consumpting equipment, such as electric motor, fan, dust catcher and emission control systems.
Shell types Heat Exchanger are classified into fixed and floating type Heat Exchangers. Fixed type Heat Exchangers are used where there are absolutely no chances for inter mixing of two fluids. In this type, the tube sheets are completely welded to the shell and acted as shell flanges. The Floating type Heat Exchangers has the advantages of removability of tube bundle and access for cleaning both inner and outer side of tubes and shell. BEU heat exchanger are shell and tube exchangers with tube bundle consisting of 'U' shaped tubes fixed by mechanical rolling to only one tube sheet. This type of heat exchangers is designed and built with removable shell and tube to allow easy maintenance.
Heat Exchanger (heater / Cooler / Condenser Etc.)
Perfect product needs perfect material,strictly control the production and strict delivery inspection.We strictly enforce the requirements of ISO9000, and strictly control every aspect of production, so that each Gasket has can be traced back. After years of efforts in the OEM and aftermarket we have now accumulated more than 400 types of PHE Gasket mold, and meet gasket EPDM, NBR, VITON manufacturing and they meet FDA standards. NEW ROC supplies SONDEX heat exchanger gaskets replacements.We have now accumulated more than 40 types of SONDEX PHE Gasket mold. NEW ROC supplies high quality plate heat exchanger spares, including both gaskets and plates replacement for plate and frame heat exchanger or gasketed plate heat exchanger. The gaskets and plates are specified to fit most plate heat exchanger makes and models for replacement. For PHE gaskets, the standard materials are Nitrile rubber (NBR), EPDM and VITON. We also supply FDA gaskets for sanitary plate heat exchangers, plate pasteurizers.
Perfect product needs perfect material,strictly control the production and strict delivery inspection.We strictly enforce the requirements of ISO9000, and strictly control every aspect of production, so that each Gasket has can be traced back. After years of efforts in the OEM and aftermarket we have now accumulated more than 400 types of PHE Gasket mold, and meet gasket EPDM, NBR, VITON manufacturing and they meet FDA standards. NEW ROC supplies SONDEX heat exchanger gaskets replacements.We have now accumulated more than 40 types of SONDEX PHE Gasket mold. NEW ROC supplies high quality plate heat exchanger spares, including both gaskets and plates replacement for plate and frame heat exchanger or gasketed plate heat exchanger. The gaskets and plates are specified to fit most plate heat exchanger makes and models for replacement. For PHE gaskets, the standard materials are Nitrile rubber (NBR), EPDM and VITON. We also supply FDA gaskets for sanitary plate heat exchangers, plate pasteurizers.
Product Introduction titanium plates are widely used in heat exchangers due to their excellent thermal conductivity, corrosion resistance, and high-temperature stability. A heat exchanger is a device that transfers heat between two fluids or materials, typically one fluid is heated while the other is cooled. titanium plates can be used as the heat transfer medium in a heat exchanger, where they efficiently transfer heat while resisting corrosion and maintaining their structural integrity. Product parameters Material: Gr1 Applicable temperature: 300 Use environment: strong acid and alkali seawater regia, etc. Features 1. Excellent corrosion resistance. Due to the extremely strong corrosion resistance of titanium, titanium plates have excellent corrosion resistance under high temperature, high pressure and strong corrosive media, which can effectively protect equipment from media erosion. 2. Good physical properties. titanium plate has high strength and hardness, and has certain toughness and wear resistance, which can well withstand the working conditions of high temperature, high pressure and strong corrosion environment. 3. Excellent processing performance. Because sinteed titanium plate has good toughness and forgeability, it is easy to form and process, and can be specially processed according to specific needs. 4. Excellent thermal conductivity. Due to the high thermal conductivity of the titanium plate, heat can be quickly transferred out in a high temperature environment, thereby ensuring the efficient operation of the equipment.
