WORKING VOLTAGE : AC 230 Volt , 50 Hz
POWER RATING : 100watt & 120watt
SPEEDS : On/Off with Balanced
5 speed Regulation ADVANTAGES
> 65% Energy Saving As compared to conventional
resistorr type regulators
FR 4, Glass Epoxy PCB duly Green Masked,
ROHS approved components.
No Harmonics/ No Humming sound when operated with fans.
Much Longer life as compared to Electronic Stepless Regulators.
Heavy Duty Switch & Capacitors used.
(>10,000* operations)
Capacitance based, No EMI & RFI.
Improves Power Factor of the Fan.
Standards as per IS: 11037-1984 (reaffirmed 2005). State-of-the-art Polycarbonate/ABS Plastic Housing. Compatibility range 36" 48 & 56 Ceiling Fan *in specific models ( No. of Speeds & specifications as per requirement)
TSJA series Oil-immersed, induction voltage regulator can be loading cases, stepless, smooth, continuously adjust the output voltage. Mainly used for electrical appliances test, electric furnace temperature control, rectifier equipment, generator excitation industry used, it has the following features:
The non-contact adjustment and long service life;
Suitable for all kinds f the nature of the load;
Strong overload capacity;
Reliable running, convenient operation and maintenance.
2. Applications
This series mainly applied to electrical appliances test, electric furnace temperature contro, rectifier equipment, generator excitation etc. In mechanical manufacture, chemical, texitile, communications, military industry etc. industry are also widely used.
Silent design, operating quieter.
Special structural design can discharge impeller through return air.
Fan coil can be repaired, and has seasonal maintenance cleaning.
WAII unit for use with MS-pressure series.
There are four models available for options.
1. On the basis of request, return air box can keep new drafts.
2. On the basis of request, condensation water plate can be increased the length and the valve is in the water plate.
3. On the basis of request, condensation water plate can use stainless material.
Fan blades
Fan type: axial, centrifugal, tube, belt driven,
Roof fan, cabinet, high pressure blower, fan impeller, blower wheel, heat exchanger, ahu, duct fan, cleanroom blower, jet fan, tunnel fan, ac/dc, car fan
Study of Single Phase AC Voltage Regulator using SCR - BRAND - VIJAYANTA, INDIA
1. Study of Single Phase AC Voltage Regulator using SCR, Model: AVC-109
hello sir,Ample electronic is manufacturer of fan regulators circuit(own design).its benefits compared to the common fan regulator circuits available in market are as follows,
1 )This is new technology.
2 )IC based SMD technology.
3) Overall cost will be reduced due to small size of regulator.
4) General faults happening in common regulators have been overcome.
5) Less power consumption.
I am expecting appointment for meeting with your company ,
I have attached photos.
Svc single and three phase, high precision, and automatic voltage regulator series is composed of contacting auto-transformer, servo motor and automatic control circuit. When power grid voltage isnâ??t stable or external load changes, the machine could sample the control circuit automatically and send a signal to drive servo motor to adjust the location of the auto-transformerâ carbon brush, ultimately adjusting the output voltage to the rated value and reach the stable state.,
AVCseries is equipped with line pass-through function .It has a number of advantages like various models, complete specification range, and sophisticated appearance. It can operate reliably and continuously for long period with no waveform distortion and high efficiency. The machine has short time delay and over-voltage protection. Whatâ more, additional features like extending delay and under-voltage protection can be added under requests. Svc can be widely applied to any place with electricity usage. As an ideal voltage-stabilized power supply, it makes sure that your electrical equipment operate smoothly.
- cpu intelligent control, large screen (lcd), user-friendly operation interface., high-speed response, voltage stabilizing process can be finished within 10ms, connectable with all kinds of generators., three-phase separated adjustment, no contact, no wear, no spark and free from maintenance, strong ability for overload, can endure 10 times the current 10 ms, three times the current 1 minute without damaging the machine., energy saving, efficiency is above 98%, , anti-interference, strong purification ability, no waveform distortion, output power is completely pure, with protection function against overvoltage, under voltage, short circuit, lack of phase, automatic bypass, strong preparatory function. Protecting limit and output voltage can be freely set to any desired value., switchable between stabilized voltage and bypass through power supply., application situation:, go especially well with electric equipment with requirements for highly reliable and stable power supply and harsh electric surrounding with large power network fluctuation and voltage instantaneous mutation.
Ec centrifugal fan
(backward curved 133 mm)
Impeller material:Pa plastic + 20% glass fiber
Direction of rotation:Clockwise, seen on rotor
Type of protection:Ip44
Insulation class:B
Mode of operation:Continuous operation (s1)
Bearing:Ball bearings
Motor protection:Self-resetting top wired internally
Speed control:0 ~ 10v dc/pwm
pump impellers are interchangeable with AH/HH/LM pump impellers, The Impeller is one of the most important parts for slurry pump. Centrifugal slurry pumps need impeller to produce the centrifugal force which transfer the . The centrifugal force is produced by the impeller which rotates to a certain speed, As main rotating component which normally has vanes to impart the centrifugal force to the liquid, Usually, slurry pump impellers have a plain or a Francis type vane.
11 inch Impeller 19121-70-30 is used for 6x5x11 Mission Magnum Centrifugal Sand Pumps.
provides 19121-xx-30 impellers for Mission Magnum centrifugal pump 6x5x14:
19121-70-30 Impeller 6 x 5 11 inch
19121-80-30 Impeller 6 x 5 12 inch
19121-90-30 Impeller 6 x 5 13 inch
19121-A0-30 Impeller 6 x 5 14 inch
Fully open impeller, best design for the chemical process industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers with ease. Allows for simple restoration of clearances when wear takes place. Back pump-out vanes reduce pressure on the shaft seal, reduce axial thrust on the bearings.
Part size cast into the impeller. This makes part identification easier.
Impeller gasket in included with impeller
All impellers are dynamically balanced
Offered Hard iron and other materials upon request
Impellers - wide variety of metallurgic and elastomeric options (metal and elastomer interchangeable) pump out vanes on rear and front (on closed impellers) reduce recirculation within pump, and aid in preventing seal contamination optional castings of straight or semi-Francis vanes (from 3 to 8 vanes on certain sizes) offer wider hydraulic options in single sizes.
Liners - wide variety of metallic and elastomeric options (metal and elastomer liners are interchangeable) to select from in order to provide the longest wear life possible.
Bearing assembly - Cartridge-style bearing housing allows for removal from pump and assembly in controlled environment, Oversized shaft diameters and reduced overhang in the wet-end contribute to long life and reliability in the field.
Seal arrangements - Expeller (Centrifugal Seal): no external sealing water required where applicable. Stuffing Box: flushed gland sealing with braided packing and a lantern ring. Mechanical Seals: advanced sealing technique without sealing leakage.
Front Lining also called front insert, it s one of the important parts for the ACP80-250 Centrifugal Single-stage Pumps.
Andritz parts and spares for the Andritz ACP series, are some of the most popular ranges of equivalent parts and spares. These pumps parts are particular popular with our customers in the paper industry.
25 Fan Impellers Regulators Suppliers
Short on time? Let Fan Impellers Regulators sellers contact you.
