VGA male/female plug to screw terminal block Sample order acceptable
Cat 6 Ethernet Adapter This durable Cat 6 Crossover adapter converts any straight through Cat 6 Ethernet cable to an Ethernet crossover cable.Built with all four pairs crossed, the adapter provides full Gigabit throughput performance.
Features RJ45 Cat.6 unshielded plug ISO/IEC 11801,ANSI/TIA 568 C.2 Insertion force 20N max. (IEC 60603-7-4) Suitable for 23~26AWG, stranded and solid wire Cable outer diameter: 4.5~7.5mm Easy, quickly, reliable and comfortable installation Suitable for cabling from home networks to large data centers
Support for 330 semiconductor manufacturer brands and 47731 models; Support for 330 semiconductor manufacturer brands and 47731 models. Extensive support for a wide range of IC types and package types. Burn EEPROM, MCU, SPI NOR/NAND FLASH, Parallel NOR/NAND FLASH, EMMC, EMCP, CPLD, FPGA. etc. ICs. Supports DIP, SOP,,SSOP, TSOP, PLCC, QFN, BGA and other packages. Burning software supports NAND FLASH Bad Block Skip and file partition table burning function. Built-in memory card slot to support project burn-in.
Support for 379 semiconductor manufacturer brands and 69832 models. Based on high-speed industrial grade FPGAs, combined with powerful ARM and built-in SSD, capable of reaching the ultimate speed of device programming. 3.3V device programming pulses up to 125MHZ. Burn + verify 8GB eMMC in 250 seconds, one of the fastest programmers in the world. Support USB,LAN interface
Fast programming speed, continuous programming speed up to 5Mb/s, 2GB EMMC, NANDFlash programming time of only 365 seconds. 48-pin universal driver, DIP devices can be used without conversion zones, support for in-circuit/on-board burn-in. support for high-speed IEEE1284 (ECP/EPP) LPT ports to connect the BeeProg2 to any PC.
The 40G&100G Muxponder supports 4x10G 40G or 4x25G 100G electrical layer multiplexing/demultiplexing, and converts the multiplexed/demultiplexed optical signals into DWDM standard wavelength optical signals. ith DWDM MUX/DEMUX, multi-channel 100G or 40G services are transmitted in the DWDM system. 40G&100G Muxponder is the lowest cost solution for 100G metropolitan area network DWDM transmission. Support: 4x25G 100G/100G 4x25G Client side: 100G QSFP28 module Line side: 4xSFP28 module(Four 25G ports) Support one 100G service de-multiplexed into four 25G rate WDM standard wavelength optical signals Support port loopback test 40G&100G Transponder incorporates QSFP28-based access interfaces that can accommodate various types of QSFP28, e.g. Multimode Single mode, The 4SFP port is 4x 10Gbps /4x25G ,permitting flexible connectivity options between the muxponders either in a WDM system, Compared with the 100G coherent solution, the 40G&100G Transponder DWDM solution significantly reduces costs and is the most cost-effective metropolitan area network and big data center expansion solution. The TMUX8 fit HT6000 Series CH04, CH08, CH20 Chassis.
OPC UA I/O Controller BL200UA is a new type of I/O system that special designed for Industrial 4.0, it supports OPC UA Protocol, built-in programmable logic control, edge computing. it suitable for IIoT Application and Industrial Automation. The EdgeIO I/O Controller BL200 includes lots of advantages to ensure its suitable for Industrial Automation and IIOT Applications. EdgeIO BL200 supports Scalable Networking, can connect one by one to save wiring costs. The EdgeIO BL200 suitable for IIOT Applications, built-in Cloud Drivers, the users can click then connect to cloud platforms. The EdgeIO BL200 supports Cyber Security and Data Security, provides VPN, SNMP, TLS, SSL, etc. The EdgeIO BL200 can be used as a simply PLC, connect IT and OT directly, easy to create the IIOT Solutions. Saving wires and wiring cost, make it more easier and cost-effective to you industrial applications.
USB TYPE C TO HDMI Cable Adapter ,Coaxial type TPE with Nylon Jacket, 4K/60HZ
Motor series: low inertia, low power. Rated output power: 0.1kw. Rated speed: 3000r / min. with brake or not: attached. Shaft end: keyway (slotted position). Protection level: IP55, excluding the shaft threading part and the basic knowledge of connector hg-kr73j. Features: low inertia, suitable for high frequency operation. Application examples: inserter, assembly machinery. Motor series: flat type, medium and small power. Rated output power: 0.75KW. Rated speed: 2000r / minhg-kr73j with brake or not: No. Shaft end: Standard (straight shaft). Protection level: IP65 (IP67). Features: the flat design makes it more suitable for installation in a narrow space. Application example: basic knowledge of robot and food manufacturing machinery hg-kr73j. High resolution encoder 131072p / rev (17 bits). High resolution encoder is included to ensure excellent performance and stability at low noise. All motors are the same size as the previous products and the wiring is compatible. Type: ha-fh series. Rated output: 0.2KW. Rated speed: 3000r / min. Electromagnetic braking: Yes. The loss control technology of AC co serving motor itself has become increasingly perfect and popular. From the perspective of real-time operating system, it is only a functional module that needs real-time response processing. The multi-function and intelligent requirements of the dry controller, a large number of signal processing, and the establishment and operation of various mathematical models to meet the needs of control, Network communication and other functional modules will operate correctly and reliably under the unified scheduling and management of the real-time operating system. Therefore, the next generation of servo drive controller will be the basic knowledge of hg-kr73j. Rated output: 2.0kw Rated speed: 3000r / min. electromagnetic braking: attached. Power supply: 200V. Suitable for high frequency operation of medium capacity and low inertia products. To improve the environmental resistance, hg-kr, hg-mr, hg-rr and hg-ur series products adopt ip65100 sites, and there are 100 different drive controls. In order to meet diversified and detailed on-site needs as much as possible, In the configuration of mr-j4 product line, it provides rich servo amplifier and servo motor products. It can meet the different needs of different customers. Type: hc-pq. Output power: 0.2KW.
USB-IF Cetified USB4 CABLE by Coaxial ,Black TPE ,With Nylon Jacket 40G/240W/20V/5A,AUDIO-VIDEO 8K/60HZ
OEM/ ODM Factory Made Design Own Brand Mass 2 Gang Modem SAA Horizontal Approved Light Switches Quick Details Network: SDK Customized support: Software reengineering Max. Current: 16A Max. Voltage: 250V Mechanical Life: 5 Years, 5years Standard: Standard Color: White Material: PC + Copper
S281 LoRa gateway is data acquisition device based on Lora, 4G and Ethernet communication technologies. One LoRa gateway can collect data from 50 wireless Lora nodes, and the communication distance can reach 2000 meters. It is an optimal solution for data collection within the area. Lora nodes powered by low power three batteries, there are temperature, temperature and humidity sensors , RS485 nodes, DI nodes, DO nodes, various agricultural sensor nodes, etc. It is widely used in workshop temperature and humidity, equipment utilization rate, agriculture, breeding and other fields.
Compatible with RJ45 plugs according to ANSI / TIA-1096-A and IEC 60603. Number of Ports: 1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 1x8, 1x9, 2x1, 2x2, 2x3, 2x4, 2x5, 2x6, 2x8. Industrial-grade: All products are of industrial standard. The extended temperature range is 40 85 for maximum performance. Gold-plated: All the terminals of our products are gold-plated and can be customized in Transmission Rate: 10 Base-T, 100 Base-T, 1000 Base-T / 2.5G, 5G, 10G / PoE, PoE+, PoE Material: All products are in line with RoHS, REACH and other EU standards. Structure: Vertical, Horizontal, Through Hole, SMT, Low Profile. Combination of connectors: RJ45+USB, RJ45+HDMI.
Widely Compatibility: USB Type C and PD Charger 20W for Phones. 20W: which enables to charge your smart phone or tablet devices simultaneously at maximum speed. Compact Design: Heat resistant and Anti-throw design, Compact and Easy to carry, Comfortable grip, Suitable use for home, travel, office, and business trip. Phone protection: Fireproof material. Charger brick has the function of automatic protection circuit. Intelligent circuit design protects against short circuiting, over-heating, over-current, and over-charging. Product name: 20w dual port QC3.0 fast charge + PD Input: 100~240V50/60Hz0.35A Type-c output: 5V 3A/9V 2.23A /12V 1.67A USB-A output: 5V-3A9V-2A12V-1.5A Support system: Android, Apple, tablet, etc. Material: high quality ABS+PC Colors: White, Black Total power: 20W
