Brass Screw-In Vents 1.Feature: designing in thread sealing , make sure waterproof can be more than Ip68 . Products can be waterproof ,dustproof, breathable . it can chose different Protection grades and breathable products ,according to request. the main body is copper Plating Ni , it has good Structure strength and weather resistance. can Equipped with the imperial and the metric system of different size can also be accepted, installation teeth non-standard screw Material:brass Ni Temperature range 4.Installation method : Can direct the assembly holes tapping installation( it fit to thickness board or not convenient to install in it .) Balance pressure, eliminating moisture, dustproof. thermal various types of outdoor electronic products,the cabinet often suffered from temperature change, wind and rain erosion and the sun's radiation, Environmental temperature fluctuations, can create pressure difference of equipment, constitutes a negative impact Shell Waterproof dustproof heat through valve help balance inside and outside pressure, preventing air front housing and water through the sealing strip into the cabinet interior, and can effectively protect the integrity of the seal. Breathable membrane can also accelerate out moisture vapor condensation, thus reduce speed,gives protection. Waterproof dustproof heat through valve can adjust pressure, thus avoid gas accumulation.Breathable membrane in this case the role of mechanical safety valve, equivalent and it also can play protective barriers, stop dust, salt and other corrosive liquid invasion, to extend product performance and life, reduce unnecessary maintenance and waste, the cost savings. Suitable for: household appliances, audio equipment communications equipment, sensors, outdoor lighting, large outdoor LED display, computer equipment, automobile exterior lighting, monitoring equipment, etc More information pls feel free contact Ms Jalila Tang 500PCS/BOX
Brass terminal 1.Material :brass 2.Surface: polishing, nickel /zinc/chrome plated , phosphating etc. 3.High accuracy, reasonable price , high quality, customized service 4.Main equipment: numerical control lathe, automatic lathe, hand lathe grinder, thread rolling machine, tapping drilling machine etc. 5.Advanced measuring &testing equipment:projecting apparatus, roughness tester, hardness tester, concentricity tester etc. 6.Quality assurance in accordance with iso9001:2000 7.Parts are produced according to customers' drawing or sample. Has the special request, make a note According to your requirement
1.Material :brass 2.Surface: polishing, nickel /zinc/chrome plated , phosphating etc. 3.High accuracy, reasonable price , high quality, customized service 4.Main equipment: numerical control lathe, automatic lathe, hand lathe grinder, thread rolling machine, tapping drilling machine etc. 5.Advanced measuring &testing equipment:projecting apparatus, roughness tester, hardness tester, concentricity tester etc. 6.Quality assurance in accordance with iso9001:2000 7.Parts are produced according to customers' drawing or sample. Has the special request, make a note According to your requirements
Tu2 has extremely low oxygen and impurity content, high purity, electrical conductivity, excellent thermal conductivity, good ductility, low gas permeability, no "hydrogen disease" or very little "hydrogen disease"; processing properties and welding, corrosion resistance and cold resistance Good material.
Place of Origin: China (Mainland) Brand Name: TG Model Number: Brass Rod Application: maching Industrial, construction Shape: Round Length: 1-12m,or as required, 3m,4m,5m,6m,or as required Grade:Brass Cu (Min):59% Alloy Or Not: Is Alloy Item: ASTM Extrusion Purity and alloy Brass welding Rod / Brass Bar Surface: mill,polish,bright,hair line,brush,sand blast,etc Price term: FOB CNF CIF EX-WROK Payment term: T/T L/C D/P D/A Western Union Paypal Package: standard seaworthy package or according to your demands
Place of Origin: Zhejiang, China (Mainland) Brand Name:JINTIAN Model Number: C36000 Application: Machining materials, Shape: Hexagonal / Round /Square Length: 2.5 - 3 M Grade: C36000 Cu (Min): 60%-63% Alloy Or Not: Is Alloy
Place of Origin: Zhejiang, China (Mainland) Brand Name: Jintian Model Number: C36000 Brass Hexagon bar Application:Electronic Shape: Hexagon Length: 1m~12m Grade: Brass C36000 Cu (Min): 60.5 Alloy Or Not:Is Alloy Diameter: 5mm~800mm
material brass all size is available in brass hinges
We are manufacturer of all types of brass parts like brass fastener, brass banjo tee, brass banjo bolt, brass hydraulic parts, brass pipe fitting parts, union tee, elbow female, brass hose parts, brass female strainer with plug, forging plug, brass pneumatic parts, brass fasteners, brass neutral links etc. We also accept the drawing of the customer and according to that drawing, we developed their product. We are making and we can make any damn parts from drawing or sample. Bon engineers is manufacturer and exporter of brass parts through the decades. Consistency in achieving quality and customers satisfaction through grand aim, vision and mission of our mentor led us in forming bon engineers. We manufacture brass parts in sectors such as electrical parts, sanitary parts, pneumatic parts, lock parts, electronic parts, fasteners, lpg parts, tarnsformer parts, plastic moulding inserts, engineering parts, hose fittings, auto parts, precision brass parts / components as per drawing & sample specifications.
We are a manufacturer of all types of brass parts like brass fastener, brass banjo tee, brass banjo bolt, brass hydraulic parts, brass pipe fitting parts, union tee, elbow female, brass hose parts, brass female strainer with plug, forging plug, brass pneumatic parts, brass fasteners, brass neutral links etc. We also accept the drawing of the customer and according to that drawing, we developed their product. We are making and we can make any damn parts from drawing or sample.
We are manufacturer of all types of brass parts like brass pipe fitting parts, union tee, elbow female, brass hose parts, brass female strainer with plug, forging plug, brass pneumatic parts, brass fasteners, brass neutral links etc. We also accept the drawing of the customer and according to that drawing, we developed their product. We are making and we can make any damn parts from drawing or sample.
We are manufacturer of all types of brass parts like brass pipe fitting parts, union tee, elbow female, brass hose parts, brass female strainer with plug, forging plug, brass pneumatic parts, brass fasteners, brass neutral links etc. We also accept the drawing of the customer and according to that drawing, we developed their product. We are making and we can make any damn parts from drawing or sample.
Size :,½, to 4, Thread,:,Metric, BSP, BSPT, NPT, NPTF etc. Material,:,All inserts available in any special grade as per customer requirement. Finish,:,Natural, chrome or any finishing as per customer requirement.
Size :,½, to 4, Thread,:,Metric, BSP, BSPT, NPT, NPTF etc. Material,:,All inserts available in any special grade as per customer requirement. Finish,:,Natural, chrome or any finishing as per customer requirement.
Details of manufacturing products Ajanta engineering works are manufacturing and Supply high precision brass, copper componets and Other metal components likes Precision turned components Brass mail-female, bushes, Brass- reducer- flange, Brass forging parts, brass fitting, Brass hose nipples, Brass flair parts, brass pins, Brass sanitary parts, brass fasteners, Brass molding inserts, Brass fitting, knurled inserts, Brass auto parts, brass gas parts Brass electronics and electric parts, Brass sheet metal components Other metals components as per samples or drowing. The company also manufacturing all type of Straightening machine for 1 mm to 100 mm capacity For all material An iso 9001: 2008 certified company
Producing high quality turned parts since 1991 Here at Ajita, quality counts. It’s important to us that we get your part manufactured when you need it and how you need it! We produce a variety of products and components including sub-assemblies on a range of machinery, utilising the latest CNC machinery. In addition, our Inspection Department has a comprehensive stock of gauges, clocks and micrometers, together with optical comparators. In many instances we work closely with our customers during the design stage of their product, to ensure that the most economical component is produced with respect to shape & standard material. Please get in touch and discuss your requirements with us. Ajita Metals offer Brass Turned Components for Various Applications. Classification: Automobile Sector Electrical Sector Electronic Sector Tele Communication Sector Instrumentation Sector Moulding Industries Sensor Industries Valves & Water Industries Lighting Systems Material: Free Cutting Brass IS 319 Types I or BS 249 Types I Any Special Non Ferrous Material Grade Brass as per RoHS Directive Thread: ISO Metric (MM Threads) BA, BSW (Inches), UNC, UNF, BSP, NPT, BSPT Any as per customize Specification Size: Circumference Diameter 1MM to 200MM with length of any size. Apart from standard Precision Turned Components, we develop customize Precision Turned Components as per technical drawing or other relevant data. Finish: Natural Nickle Plated Silver Plated Tin Plated As per customer Specification Any Kind of Metal Turned Parts Can be Developed As Per Customers Specifications.
Ajita forge is one of the few green forging companies in india, with majority of its power produced by renewable resources. Over the years Ajita Forge has created world-class capacities and capabilities. Our forging facilities consists of fully automated forgings press lines ranging from 50T to 1000T. All forging press lines are highly flexible, which gives the company the inherent advantage to simultaneously meet different customer demands and optimize production . This allows Ajita Forge to meet the growing demands of its customers continuously. We provide various types of Brass Forged Components; those are used in the Agricultural equipment, Automotive Parts, Water & Valve Fittings,Gas & Hydraulic fittings, Electrical & Engineering Industries Etc. Range: From 0.05 Kg to 5.00 Kg Material: ? Forging Brass As Per BS 218 ? Any Special Brass Material Composition as per customers requirement Platting: ? Natural, Nickel Plated and special plating as per customer requirement. Why use Forging ? ? The forging process can create parts that are stronger than those manufactured by other metalworking process. This is why forging are almost always used where reliability and human safety are critical. And some special industry must required forged part for better reliability & safety Any kind of brass forged components can be developed as per customer’s specification & design
Ajita metals offers a wide variety of brass fittings for globally recognized piping & tubing systems. The breadth and depth of our brass fitting lines are unmatched by any single competitor from india. Manufactured using high quality material, these products are widely appreciated for their superior quality, easy usage, dimensional accuracy, low maintenance, high performance and long life span. Designed as per the requisite norms of the industry We are engaged in offering our clients with following brass components: • brass compression tube fittings • sae/jic flare fittings • pipe fittings • hose barbs • push-on-hose barbs • garden hose fittings • air brake hose tails • swimming pool cover hardware & accessories • customized brass components. Material offered: copper alloys such as free cutting brass, dzr, lead free brass, forging grade, bronze, special alloyed brass in various compositions. Our range of products is highly demanded in the following industries: • plumbing and sanitary • piping & tubing • hvac & refrigeration • construction & infrastructure • automobile • railways • aerospace • defence • hydraulics • instrumentation • lpg, cng & petroleum • oil and gas Inspection & quality control We have quality control department, which ensures that each product manufactured as exactly to the print and each process are controlled and the quality of the parts maintained throughout the entire process. We follow rigorous controls like material control, process control, machining and dimensional control, assembly line quality control, leakage / pressure testing along with supplementary tests to ensure that our range is free from all kinds of defects. Due to our ethical business policies, we have been able to serve our esteemed clients, located across the globe. We provide inspection reports to our customers, if required. For more information on quality
METAL COMPONENTS CAN SUPPLY AGAINST CUSTOMER DRAWING AND SEPCIFICATION LIKE SAMPLE / PHOTOGRAPH. STANDARD
Brass fittings as per drawings should be provided corrugated plastic coated boxes
