Insulated milk storage tank
1000 litter BMC milk chillar stilness Steel 304 grade milk chillar time 3 har 2.5 ton single phase Emersion company compressor automatic digital panel
Diameter 1m-4m Capacity 1m3- 200m3 Customized diameter: 4m-4.5m Customized capacities: 250m3-300m3 Diameter Requested can be 400, 500, 600, 700, 800 mm. We can fabricate all kinds of large scale FRP vessels under the inquiry of clients.
Material:� SUS304 Manhole: 400A Outlet: 40A Ball valve: 40A Relief valve: 15A Forklift box: SUS304 Rules applied: IMDG IBCs Capacity: 1.3L Stackable: Yes Description UN certified stainless steel tank produced by Fubang: the selection of material thickness and size is calculated by the engineer, the strength meets the use demand, the processing technology is rigorous, and the service life can be as long as several decades. The material of inside container is stainless steel,the outer part is protected by metal frame preventing container deformation and other damage caused by collision.� The use safety performance test of stainless steel tank is strictly reviewed by the classification society's testing organization. The design strength calculation must meet the design standards of medium bulk containers and � the use requirements. The performance test data must meet the requirements of international maritime transport medium bulk containers.� According to the requirements of maritime transportation rules, the bumps generated during the transportation of products shall be simulated, and the vibration test of 1 hour shall be conducted to verify that the products to be free from any abnormality or leakage. Stacking test, lifting test and fork lift test of the products are carried out in accordance with the standard. � After the experiment, the product shall be in good condition.The product after drop test can not show any signs of leakage. Only passing this kind of experiment,the product can pass the UN certificate of classification society.
Material: SUS304/SUS316L Thickness: 2.5mm Weight: 210KG Pressure: Normal Dimension(L*W*H): 1132*1132*1330mm OEM/ODM: OK
Parameters of 1300L Stainless Steel Tank Material: SUS304 Manhole: 400A Outlet: 40A Ball valve: 40A Relief valve: 15A Forklift box: SUS304 Rules applied: IMDG IBCs Capacity: 1.3L Stackable: Yes Description UN certified stainless steel tank produced by Fubang: the selection of material thickness and size is calculated by the engineer, the strength meets the use demand, the processing technology is rigorous, and the service life can be as long as several decades. The material of inside container is stainless steel,the outer part is protected by metal frame preventing container deformation and other damage caused by collision.� The use safety performance test of stainless steel tank is strictly reviewed by the classification society's testing organization. The design strength calculation must meet the design standards of medium bulk containers and  the use requirements. The performance test data must meet the requirements of international maritime transport medium bulk containers. According to the requirements of maritime transportation rules, the bumps generated during the transportation of products shall be simulated, and the vibration test of 1 hour shall be conducted to verify that the products to be free from any abnormality or leakage. Stacking test, lifting test and fork lift test of the products are carried out in accordance with the standard. � After the experiment, the product shall be in good condition.The product after drop test can not show any signs of leakage. Only passing this kind of experiment,the product can pass the UN certificate of classification society.
Food Grade 1000L Stainless Steel IBC Tank Liquid Tank Material: SUS304/SUS316L Thickness: 2.5mm Weight: 210KG Pressure: Normal Dimension(L*W*H): 1132*1132*1330mm OEM/ODM: OK
1000L Stainless Steel IBC Tank Material: SUS304/SUS316L Thickness: 2.5mm Weight: 210KG Pressure: Normal Dimension(L*W*H): 1132*1132*1330mm OEM/ODM: OK
Vertical vessel: Diameter 1m-4m, capacity 1m3- 200m3, all kinds of equipment can be tailored fabricated. Application: Acid proof tank (tank for HCL, H2SO4, phosphoric acid, nitric acid, organic acid, Â fluosilicic acid,hydrofluoric acid etc.) Alkali proof tank, Brine tank, sewage tank, FRP/PVC, FRP/PP composite tank. Standard: EN 13121-3, BS 4994-1997, ASTM D-3299
1000L Stainless Steel IBC Tank Material: SUS304/SUS316L Thickness: 2.5mm Weight: 210KG Pressure: Normal Dimension(L*W*H): 1132*1132*1330mm OEM/ODM: OK
Parameters of 1300L Stainless Steel Tank Material:� SUS304 Manhole: 400A Outlet: 40A Ball valve: 40A Relief valve: 15A Forklift box: SUS304 Rules applied: IMDG IBCs Capacity: 1.3L Stackable: Yes Description UN certified stainless steel tank produced by Fubang: the selection of material thickness and size is calculated by the engineer, the strength meets the use demand, the processing technology is rigorous, and the service life can be as long as several decades. The material of inside container is stainless steel,the outer part is protected by metal frame preventing container deformation and other damage caused by collision.� The use safety performance test of stainless steel tank is strictly reviewed by the classification society's testing organization. The design strength calculation must meet the design standards of medium bulk containers and � the use requirements. The performance test data must meet the requirements of international maritime transport medium bulk containers.� According to the requirements of maritime transportation rules, the bumps generated during the transportation of products shall be simulated, and the vibration test of 1 hour shall be conducted to verify that the products to be free from any abnormality or leakage. Stacking test, lifting test and fork lift test of the products are carried out in accordance with the standard. � After the experiment, the product shall be in good condition.The product after drop test can not show any signs of leakage. Only passing this kind of experiment,the product can pass the UN certificate of classification society.
EZPAck proprietary 2-lyaers bladder. Available from 10-liter up to 20,000-liter
Basic knowledge about the external floating roof tank: The floating roof tank (FR tank) is broadly divided into external floating roof tank and internal floating roof tank (IFR tank). The floating roof tank (FR tank) does not have a fixed roof. It is open in the top and has a floating roof only. The external floating roof tank consists of an open-topped cylindrical steel shell equipped with a roof, which floats on the surface of the stored liquid. The roof rises and falls with the liquid level in the tank. As opposed to the fixed roof tank, there is no vapor space (ullage) in the floating roof tank, very low liquid level situations are not included. In principle, this eliminates tank breathing loss and greatly reduces the evaporative loss of the stored liquid. There is a rim seal system between the tank shell and roof to reduce rim evaporation. The floating roof has support legs hanging down into the liquid. At low liquid levels the roof eventually lands and a vapor space forms between the liquid surface and the roof, similar to the fixed roof tank. The support legs are usually retractable to increase the working volume of the external floating roof tank. What advantages does the external floating roof tank have? The external floating roof tank is usually installed for environmental or economical reasons to limit product loss and reduce the likelihood of emission of volatile organic compounds (VOCs) and other potential air pollutants. Normally, the roof of the external floating roof tank rests directly on the surface of the stored liquid, leaving little vapor space and consequently leading to a much lower risk of rim space fire. What products are suitable to store by the external floating roof tank? The external floating roof tank is storage tank that is commonly used to store large quantities of crude oil, condensate and so on petroleum products. Medium flash point liquids such as naphtha, kerosene, diesel, and crude oil are usually stored by the external floating roof tank. The fixed roof tank, internal floating roof tank and external floating roof tank are the main types of API Standard 650 storage tank we supply. http://api650steel.com/ Contact Ms. Olivia Henan BEBON Iron & Steel Co., Ltd Email: olivia.roy88@gmail.com Tel: 008637186151527
The name of the API620 design standard is "API620 Design and Construction of Large Low Pressure Storage Tanks", which is a specification for the design and construction of large welded steel and low pressure storage tanks formulated for design. API 620 storage tanks operate at 250F or less with operating pressures exceeding 2 lbs in and less than 15 lbs in . Steel storage tank construction method: Ordinary vertical storage tank construction basically adopts the guide chain inversion method: construction preparation material inspection blanking processing inspection tank bottom medium plate welding tank bottom arc edge plate center column and umbrella stand top ring group Welding Hemming Angle Steel Group Welding Temporary Dome Bracket Assembly Guide Chain Lifting Device Dome Group Welding Lower Ring Group Welding Lifting Top Ring Wall Panel Girth Welding Each Ring Girth Seam Group Welding Bottom Ring Corner seam welding of bottom plate edge plate of bottom plate inspection accessory installation vacuum test overall test settlement observation delivery. The company has long been engaged in the design, construction and on-site installation of foreign API620 storage tanks. It has ASME welding ability certification, API620 storage tanks, API650 storage tank design capabilities, pressure vessel design and manufacturing licenses, petrochemical equipment pipeline general contracting qualifications, and safety Production license, international trade import and export license.
Product Name: Pressure round tank manway with sight glass for sale Valve Body Material: 1.4404/1.4301, SS304/SS316L(Forged) Seal Material: EPDM (standard) conforms to FDA177.2600 Surface Finishing: RA 0.5 to 0.8 um Pressure: 5.0 Bar Max. Working Tem.: 120 degree C Availably Size: 200, 220, 300, 350, 400, 430, 450, 500, 600 Gasket: EPDM, silicone or Viton Height: 100,120,150 Certificate: PED 2014/68/EU, FDA.177.2600
Product Name: Pressure round tank manway with sight glass for sale Valve Body Material: 1.4404/1.4301, SS304/SS316L(Forged) Seal Material: EPDM (standard) conforms to FDA177.2600 Surface Finishing: RA 0.5 to 0.8 um Pressure: 5.0 Bar Max. Working Tem.: 120 degree C Availably Size: 200, 220, 300, 350, 400, 430, 450, 500, 600 Gasket: EPDM, silicone or Viton Height: 100,120,150 Certificate: PED 2014/68/EU, FDA.177.2600
Millionsun has a solar storage tank workshop to produce pressurized and unpressurized tank according to different demand. Corrosion and hard water is a challenge to tank, especially pressurized tank, we already have good solution. Stable product had exported to Europe and Africa. Besides good price performance ratio is also advantage for us.
Millionsun Solar water storage tank workshop to produce stainless steel tank and Vitreous Enamel tank, we make the solar storage tank according to Australia standard. The solar storage tank is well protected against corrosion and hard water. It combines easy assemble and an optimal price 1 performance. The hot water supply is provided in the hygienic continuous flow and the latest technology.
Millionsun has a solar storage tank workshop to produce pressurized and unpressurized tank according to different demand. Corrosion and hard water is a challenge to tank, especially pressurized tank, we already have good solution. Stable product had exported to Europe and Africa. Besides good price performance ratio is also advantage for us.
The heat pipe solar collector is one important part for the split pressurized solar system. This is consisted of great efficiency heat pipe and glass vacuum tube, with a great efficiency of heat collecting. This systems is mainly positioned on the roof or in the garden. And as this system is split with the water tank, so it's not heavy and looks very beautiful. This type system is now very popularly used in Europe, America and Australian countries. How it works The heat pipe solar collector absorbs solar heat mainly by the vacuum tube and the heat pipe. When the vacuum tube absorbs solar heat, it transfers the heat to the aluminum fin inside, and the aluminum fin is in good touch with the heat pipe, so it transfer the heat to the heat pipe. As soon as the heat pipe is heated, the liquid inside it will become steam and rise up to the condenser part, and release the heat to the water that goes through it, and then the steam will become liquid again and restart the circulation.
