Shandong Wofeng New Material Co., Ltd. is manufacturing printed PPGI/PPGL since year 2008. We are mainly engaged in the sales and processing of color coated steel/aluminium, printed steel/aluminium, PVC laminated steel/aluminium coils and sheets.
We deal in Hard Rolled, Cold Rolled, Galvanized, Tin plate , TFS coils , sheets & its scrap too.
We are a leading Manufacturer, Traders and supplier of galvanized steel sheet. Galvanization is the process of applying a protective zinc coating to steel or iron in order to prevent it from rusting. The term is derived from the name of Italian scientist Luigi Galvani. Galvanized iron (GI) sheets are steel sheets which are basically coated with zinc and include a range of hot dip galvanized and electro-galvanized steel sheets. Zinc weathers at a very slow rate, so the coating generally has a long life. Zinc has a greater electro-negativity than iron and hence provides cathodic (or sacrificial) protection to the steel. This results in the zinc corroding in preference to the steel if the coating is chipped or damaged to expose the base metal. Besides acting as galvanic protector, The other functions of the zinc layer are as follow: To retain the steel intact with its full initial strength. To provide the surface a more pleasing appearance. To increase the life of any suitable organic finishing system applied over it. To protect the steel from corrosive attack in most atmospheres, acting as a continuous and lasting shield between steel and the atmosphere. Features Uniform zinc coating in the range of 60-600 GSM Spangles: Zero / regular / minimized / suppressed Surface finish: Normal spangle, large spangle, small spangle, matte surface With and without tension leveling Passivation: Chromated (Hexavalent / Trivalent) Oiling: 100-1,000 GSM Winding: Controlled / staggered (+/- 5 to +/-15mm) Coil id: 508 / 610 mm Elongation: 16-33%. Dimensions Thickness: 0.18 - 3.2 mm Width: 800 - 1,500 mm Length: Up to 2,500 mm Grades & Standards CQ, DQ, DDQ, EDDQ, HSLA ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS Commercial Steel (CS Types A, B, and C) Forming Steel (FS Types A and B) Deep Drawing Steel (DDS Types A and C) Extra Deep Drawing Steel (EDDS) Structural Steel (SS) further designated by Grades (33,37,40,50,80) High Strength Low Alloy Steel (HSLAS) Supply condition Coil / Slits/ Sheet form
Dimensions Thickness: 0.15-3.2 mm Width: 900 - 1,500 mm Length: Up to 2,500 mm Oiling: 100-1,000 GSM Winding: Controlled / staggered (+/- 5 to +/-15mm) Coil id: 508 / 610 mm Elongation: 16-33%. Grades & Standards CQ, DQ, DDQ, EDDQ, HSLA ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS Commercial Steel (CS Types A, B, and C) Forming Steel (FS Types A and B) Deep Drawing Steel (DDS Types A and C) Extra Deep Drawing Steel (EDDS) Structural Steel (SS) â?? further designated by Grades (33,37,40,50,80) High Strength Low Alloy Steel (HSLAS) Supply condition Coil / Slits/ Sheet form
Dimensions PPGI and PPGL Type: Continuous Coil Color Coating Thickness (MM):0.18 TO 2.00 MM Width (MM):900 TO 1450 MM GSM: 70-250 Gsm Paint Coating thickness: 15-40microns Surface Finishes: Smooth, matt, high gloss, textures, printed Output Coil ID (MM):508mm / 610mm Output Coil OD (MM):1200 mm Output Coil Weight (MT):3-7 MT Type of Painting: EXPOXY,RMP (Regular Modified Polyester), SMP (Silicon Modified Polyester) HDP (High Durable Polyester), SDP (super Durable Polyester) PVDF (Poly Vinylidene Fluoride), PLASTISOL, PUPA/ARS, Anti-Bacterial, Wrinkle Finish /Anti Skidding Self-Cleaning / Anti Dust. Type of Material: HOT DIPPED â?? GALVANIZED steel (ZINC : 60-350 GSM) HOT DIPPED -ALU ZINC (ALUZINC 30-150) Grade:LFQ,SS,SGCC,CS,DX,HX Paint Coating:4-8 Microns primer + 15 TO 35 microns top Coat ( Four Coat System also available â?? Top & Bottom Side with Primer + Paint ) Supply conditions Coil / Sheet/ Slit / corrugated sheets / plain sheets / trapezoidal profiles Applications Construction and infrastructure: Industrial roofing and cladding, cold storage and warehouses, airports, atriums in malls, showrooms, false ceilings, lighting fixture White goods: Refrigerators, display freezers, washing machines, air conditioner wraps Automotive: Bus bodies, railway coaches, luxury coaches
Dimensions Thickness: 0.4-3.2mm (CRCA); 0.15-1.9mm (CRFH) Width: 800-1,625mm Material - Mild Carbon Steel Length - Can be cut to sheets according to requirement Max. Weight - 20MT per coil Grades Extra Deep Drawing steels (EDD, IF) IFHS (350, 400, 440) Bake hardening steel (BH180,220) HSLA (320, 340, 440) Semi-processed electrical steels Steels for enameling CORTEN ASTM: A 1008: DS type A & B, DDS, EDDS, EDDS+ IS: IS 513: D, DD, EDD DIN: DIN 17100: ST 37.3, ST 44.2, ST 44.3, ST 52.3 EN: EN 10268: HSLA 340, HSLA 420,EN 10130: DC 01, 03, 04, 05/06 JIS: G 3141: SPCD, SPCE, SPEN, SPRC 340/ 390,SPFC 340/ 390/ 440 Supply Condition: Coil / Slit / Sheet form Surface textures a. Smooth (plating applications) - suitable for electroplated articles and also for re-rolling when a matt texture is undesirable. A maximum surface roughness of 0,5 micrometers centre line average (CLA) is aimed for. Typical applications are car bumpers, door locks and other electroplated articles. b. Light matt (drawing and pressing applications)- surface roughness of 0.60 - 1,25 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for. Typical applications are automobile panels. c. Medium matt (drawing and pressing applications)- A surface roughness of 0,8 - 1,6 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for. Typical applications are drum bodies and ends.
Dimensions Thickness: 1.6 -25mm Width: 900-2,100mm Material - Mild Carbon Steel Max. Weight â?? 22 â?? 25 MT Grades Drawing quality steel: D / DD / EDD Cold rolling grades: IF (Interstitial Free) and High Strength IF Steels Medium carbon / high carbon steels High strength steels: JIS G 3113 SAPH310/370/400/440, JIS G 3134 SPFH-540/590, EN 10149-2 S550MC/S650MC, DP590 Line pipe â?? API X42 to X-80 grades (Sour and Non Sour Applications) Boilers and pressure vessels grades Ship building grades Corrosion resistant steel Re-rolling/ Drawing Grades, Tube and Pipe/ Forming Grades, Structural/ Medium Tensile Tube/ Forming Grades, LPG/ Low Pressure Vessel Grades, HSLA Grades, Medium Carbon Grades, Weather Resistance Grades, Line Pipe Grades, Chequered Plates ASTM (USA) : A 36 A572: Gr 42, Gr 50 IS (INDIA) : IS 2062: E250 Gr A/ B/ C, E350 Gr A/ B/ C DIN (GERMANY) : DIN 17100: ST 37.3, ST 44.2, ST 44.3, ST 52.3 BS (ENGLAND) : BS 4360: 40, 43, 50 EN (EUROPE) : EN 10025: S235, S275, S355 JIS (JAPAN) : G 3106: SM400, SM 490 G 3101: SS400, SS490
steel coil (GI, GL,PPGI,PPGL) galvanized steel coil, clour coated steel coil, prepainted steel coil thickness :0.1-6 mm width:600-1500 mm coating : PE ,PVDF, SMP,HDP
steel coil (GI, GL,PPGI,PPGL) galvanized steel coil, clour coated steel coil, prepainted steel coil thickness :0.1-6 mm width:600-1500 mm coating : PE ,PVDF, SMP,HDP
We specializes in producing hot dipped galvanized zinc coating steel coil building. Material ( Z40,Z60,Z80,Z120,Z180,Z275 )
Japan Nisshin steel -- Copper coated stainless coil of sus304 Brand name Copper softain Usage: Roofing for Modern or Historic Building. Gutters, Panels, etc. Base metal SUS304 Copper Coating 10 micron/2 micron Shipment by container from Kaohsiung, Taiwan. (Japan origin cert can supply) Mostly paper packing. Subcon/unsold
Color Coated Coil & Sheet Alloy:1100 3003 3004 3005 3105 3104 5005 5052 5754 8011 etc Temper:H12 H14 H16 H18 H19 H22 H24 H26 H28 H32 H36 H38 H42 H44 H46 H48 etc Thickness:0.04(PE)/0.18mm(PVDF)-3.0mm Width: 20-2630mm Size:Can� be� customized Surface:Bright/mirror,Normal,coated Payment:TT,LC,etc PE:Coating Thickness:Min 16Mic 1) High gloss 2) Multi-choice colors 3) Impact resistance 4) Easy for processing 5) Indoor-8-10years Warranty PVDF:Coating Thickness:Min 25Mic 1) Excellent weather-proof durability � � 2) Anti-ultraviolet � 3) High erosion resistance � 4) Stable color and gloss � 5) Good mechanical processing performance � 6) Abrasion resistance � 7) Anti-impact 8) High flexibility 9) Outdoor-above 15 years Warranty Application:Building,Indoor ceiling,Rain gutter,Rolling-shutter,Truck panel,Roofing systems.
Ss Sheet Available From Width : 1000 Mm, 1250 Mm, 1524 Mm, / 2000 Mm Length : 2440 Mm / 3050 Mm / 6100 Mm Grade : 304/ 304l/ 316/ 316l. Thickness : 3 Mm To 100 Mm Also Plastic Coated Sheets Available From 1mm To 3mm. Applications : Machining / Furniture / Pharmaceutical & Engineering Application.
Weight: 100-300 KG, customized Features: Cleaned surface of internal and external, evenly structured, high precision of size, easy to weld, good formability. Applications: Used in Air-conditioner, Heat-Exchanger of Refrigeration industry and pipeline system connection.
We are India's most trusted Concertina Coil Manufacturers, Supplier in India, Get quotation for best quality Concertina Coil in India | MTE
Prepainted Aluminum Sheet / Coil Alloy 1060, 1100, 3003, 3004, 3105, 5052, 5083, 5754, 6061, 6063, 6082, etc Status H18, H26, H16, H14, H24, H22, O, etc Dimensions ( 0.3~3.0 ) Ã?? (500 ~1600 ) Ã?? (500 ~6000 )mm Note: special specifications can be produced by agreement. Paint Polyester paint (PE), fluorocarbon paint (PVDF) Coloring Single-sided, double-sided Others Can be covered with transparent film Application Decoration
Structure: Connector body with hexagonal wrench surface, thread ISO metric in accordance with EN60423 or thread NPT in accordance with ANS/ASME B1.20.1-1983, Comply with stands AS/NZS 2053. 8, hexagonal pressure nut, sealing ring and ferrule. Material: Connector body - Galvanized die casting zinc plated steel& malleable ironï¼? nickel plated brass, stainless steel. Hexagon pressure nut - Galvanized die casting zinc plated steel& malleable iron nickel plated brass, stainless steel. Sealing ring - Nylon 66 Ferrule - Galvanized steel Features: Simple, one piece installation provides a quick and reliable liquid-tight seal IP rating from IP40 to IP66/67 in combination with the corresponding flexible conduits High mechanical strength Highly liquid-tight and dustproof Vibration and tension proof Inherently low fire hazard Covering of the conduit ends Available in straight, 45o and 90o bodies Available in ISO Metric and NPT threads Applications: General industrial and commercial electrical wiring protection Machining centers and robotics any narrow space in static applications General wiring for OEM applications Low fire hazard applications Under flooring wiring in office buildings Special Applications: According to customer's samples and specifications, we can manufacture special fittings for suit any type of flexible conduit applications. Specifications: 5/16â??-4â?? Suitable flexible conduits: VJ type of vacuum jacketed flexible conduit LT type of liquid-tight flexible conduit FM type of flexible metallic conduit
Car Fitment: Daewoo Model: LANOS / SENS (KLAT), LEGANZA (KLAV), LANOS Saloon (KLAT) Year: 1997-, 1997-2004, 1997- Engine: 1.6 16V, 1.3, 1.5, 2.0 16V, 1.6 16V, 1.5, 1.3 Size: STANDARD Warranty: 12 Months Place of Origin: Heilongjiang, China Brand Name: Aotong Certification: ISO16949 Car Model: GM. Wu ling, Daewoo , Opel , Chevrolet OE NO.: 1104038, 10450424, 10490192, 1208051, 96350585, 88921374
Car Fitment:SUZUKI Model:VITARA Year:1999-2003 Engine:2.0L Size:STANDARD Warranty:12 Months Place of Origin:Heilongjiang, China Brand Name:Aotong Certification:ISO16949 Car Model:Suzuki OE NO.:MIC-2000, FTM-063, 33410-85120, 33410-85000
Various properties of Cold Work Steels make them perfect for manufacturing a variety of products such as cutting and pressing tools, cavity moulds, knives, hobbing and drawing tools, cavity-sinking punches, flat and circular thread-rolling dies, and much more. Having all such properties like high surface hardness, good toughness and compressive strength, high wear resistance the Cold Work Steel that we offer is highly demanded. Tool & Die Steel is one of major Strengths, We are a Leading Importer - Exporter - Stockist of these Steel Products. WE offer Wide range of Sizes for this Steel. Suited For Cutting dies Heavy duty cutting and Punching tools Milling cutters Reamers Calipers Tapping dies Measuring tools Technical Specifications Grade % C Mn Si Cr Mo V W S P Co AISI 01 Min 0.85 1.00 0.20 0.40 Max 0.40 Max Max - Max 0.95 1.30 0.40 0.60 - 0.20 0.60 0.015 0.020 - AISI D2 (DIN 1.2379) Min 1.40 0.30 0.30 11.00 0.70 0.90 - Max Max Max Max 1.60 0.50 0.50 13.00 1.20 1.10 - 0.015 0.020 0.6 AISI D3 (DIN 1.2080) Min 2.00 0.24 0.25 11.00 - Max Max Max Max - Max 2.35 0.45 0.45 13.00 - 0.80 0.75 0.015 0.020 -
