Classification : Hastelloy Alloy
Hastelloy Alloy Coil is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media.Hastelloy Alloy Coil is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.
DX51D galvanized coil is a surface galvanized sheet with yield strength of 235MPa.
Galvanized coil, a thin steel sheet that is dipped into a molten zinc bath to adhere a layer of zinc to its surface. It is mainly produced by the continuous galvanizing process, in which rolls of steel sheet are continuously dipped into a bath of molten zinc to make galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also manufactured by the hot dipping method, but immediately after leaving the bath, it is heated to about 500C to produce an alloyed coating of zinc and iron. This type of galvanized coil has good paint adhesion and weldability.
DX51D Galvanized coil
Manufacturer JIS DIN high-quality electro-galvanized steel coil
Classification : Inconel Alloy
Inconel Coil It has good high-temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding process performance, and satisfactory thermal strength and high plasticity below 700. Alloys can be strengthened by cold working, and can also be joined by resistance welding, fusion welding, or brazing.
5419 Steel Coils Suppliers
Short on time? Let Steel Coils sellers contact you.
Classification : Monel Alloy
1.According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys.
2.According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc.
Q235 galvanized coil is a surface galvanized sheet with yield strength of 235MPa.
Galvanized coil, a thin steel sheet that is dipped into a molten zinc bath to adhere a layer of zinc to its surface. It is mainly produced by the continuous galvanizing process, in which rolls of steel sheet are continuously dipped into a bath of molten zinc to make galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also manufactured by the hot dipping method, but immediately after leaving the bath, it is heated to about 500 C to produce an alloyed coating of zinc and iron. This type of galvanized coil has good paint adhesion and weldability.
Q235 Galvanized Coils
Manufacturer JIS DIN high-quality electro-galvanized steel coil
The surface of theGalvalume Coil is a unique smooth, flat and gorgeous star, and the basic color is silver white. The special coating structure makes it have excellent corrosion resistance. The normal service life of the Galvalume Coil can reach 25a, and the heat resistance is very good, which can be used in the high temperature environment of 315; The coating has good adhesion with the paint film, has good processing performance, and can be punched, sheared, welded, etc; The surface conductivity is very good.
Galvalume Coil
Manufacturer JIS DIN high-quality electro-galvanized steel coil
* PPGI is galvanized color plate, PPGL is galvanized color plate, both are color plates, the substrates are different, one is galvanized structure, the other is galvanized structure, the substrate is different, which determines the difference in performance.
* Advantages: It not only has the mechanical strength and easy forming properties of steel plates, but also has good decorative properties and corrosion resistance of organic materials. The coating has strong adhesion and can keep the color fresh for a long time. Application: Widely used in various fields such as construction, home appliances, furniture, public facilities and transportation.
Galvanized Coils
Manufacturer JIS DIN high-quality electro-galvanized steel coil
Q235 galvanized coil is a surface galvanized coil with yield strength of 235MPa.
PPGI is galvanized color plate, PPGL is galvanized color plate, both are color plates, the substrates are different, one is galvanized structure, the other is galvanized structure, the substrate is different, which determines the difference in performance.
Advantages: It not only has the mechanical strength and easy forming properties of steel plates, but also has good decorative properties and corrosion resistance of organic materials. The coating has strong adhesion and can keep the color fresh for a long time. Application: Widely used in various fields such as construction, home appliances, furniture, public facilities and transportation.
PPGI/PPGL Q195
Manufacturer JIS DIN high-quality electro-galvanized steel coil
Galvanized sheet G550 belongs to high-strength series galvanized sheet, with high requirements for tensile strength and yield strength. Its minimum yield strength is 560Mpa, minimum tensile strength is 650Mpa, and zinc layer thickness is 275g/m2. It has strong corrosion resistance and is mainly used for building structures with high strength requirements, such as Z-shaped steel, C-shaped steel, floor bearing plate, etc.
PPGLis galvanized color plate, PPGL is galvanized color plate, both are color plates, the substrates are different, one is galvanized structure, the other is galvanized structure, the substrate is different, which determines the difference in performance.
Advantages: It not only has the mechanical strength and easy forming properties of steel plates, but also has good decorative properties and corrosion resistance of organic materials. The coating has strong adhesion and can keep the color fresh for a long time. Application: Widely used in various fields such as construction, home appliances, furniture, public facilities and transportation.
PPGL G550
Manufacturer JIS DIN high-quality electro-galvanized steel coil
Galvanized sheet G550 belongs to high-strength series galvanized sheet, with high requirements for tensile strength and yield strength. Its minimum yield strength is 560Mpa, minimum tensile strength is 650Mpa, and zinc layer thickness is 275g/m2. It has strong corrosion resistance and is mainly used for building structures with high strength requirements, such as Z-shaped steel, C-shaped steel, floor bearing plate, etc.
PPGLis galvanized color plate, PPGL is galvanized color plate, both are color plates, the substrates are different, one is galvanized structure, the other is galvanized structure, the substrate is different, which determines the difference in performance.
Advantages: It not only has the mechanical strength and easy forming properties of steel plates, but also has good decorative properties and corrosion resistance of organic materials. The coating has strong adhesion and can keep the color fresh for a long time. Application: Widely used in various fields such as construction, home appliances, furniture, public facilities and transportation.
PPGL G550
Manufacturer JIS DIN high-quality electro-galvanized steel coil
* Carbon steel (1.0330 material) is a cold formed European standard cold rolled high-quality low-carbon steel plate. In BS and DIN EN 10130 standards, it includes five other steel types: DC03 (1.0347), DC04 (1.0338), DC05 (1.0312), DC06 (1.0873) and DC07 (1.0898). The surface quality is divided into two types: DC01-A and DC01-B.
* DC01-A: Defects that do not affect the formability or surface coating are allowed, such as air holes, slight dents, small marks, slight scratches and slight coloring.
* DC01-B: The better surface shall be free of defects that may affect the uniform appearance of high-quality paint or electrolytic coating. The other surface shall meet at least surface quality A.
* The main application fields of DC01 materials include: automobile industry, construction industry, electronic equipment and household appliances industry, decorative purposes, canned food, etc.
Commodity: Carbon steel coil
Standard: DIN GB JIS BA AISI ASTM EN GOST ETC.
Mechnical: Commercial / Drawing / Deep Drawing /Extra Deep Drawing/Structural quality
Surface treatment: Chromated and oiled, and ant-ifinger
Hardness: Softy, half hard ,hard quality
Grade: DC01
ST14,ST15,ST16,DC01,DC03,DC04,DC05,DC06,etc.
Thickness: 0.12-12.0mm
Width: 600-1500mm
Coil weight: 3-34MT/Coil or as your request
MOQ: 3-5 MT
Packaging: Export standard, seaworthy
ID: 508mm or 610mm
Trade Term: FOB, CFR, CIF, EXW ETC.
Transport Type: Container, bulk and train
Standard Grade General Size Delivery Condition
ASTM A36 A36/A36-B 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A283 A283-B/A283C 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A572 A572Gr50-B/A572Gr42-B 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A515 A515Gr70 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A516 A516Gr70 5-20 * 2300-2500 * C Boron added or Black Condition
JIS G 3101 SS400-B 5-20 * 2300-2500 * C Boron added or Black Condition
JIS G3136 SN400B 5-20 * 2300-2500 * C Boron added or Black Condition
EN10025-2:2004 S235JR-S355K2+N 5-20 * 2300-2500 * C Boron added or Black Condition
EN10025-5:2004 S355J2W/S355K2W 5-20 * 2300-2500 * C Boron added or Black Condition
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
1020 steel (1.0330 material) is a cold formed European standard cold rolled high-quality low-carbon steel plate. In BS and DIN EN 10130 standards, it includes five other steel types: DC03 (1.0347), DC04 (1.0338), DC05 (1.0312), DC06 (1.0873) and DC07 (1.0898). The surface quality is divided into two types: DC01-A and DC01-B.
DC01-A: Defects that do not affect the formability or surface coating are allowed, such as air holes, slight dents, small marks, slight scratches and slight coloring.
DC01-B: The better surface shall be free of defects that may affect the uniform appearance of high-quality paint or electrolytic coating. The other surface shall meet at least surface quality A.
The main application fields of DC01 materials include: automobile industry, construction industry, electronic equipment and household appliances industry, decorative purposes, canned food, etc.
Commodity: 1020 Carbon steel coil
Standard: DIN GB JIS BA AISI ASTM EN GOST ETC.
Mechnical: Commercial / Drawing / Deep Drawing /Extra Deep Drawing/Structural quality
Surface treatment: Chromated and oiled, and ant-ifinger
Hardness: Softy, half hard ,hard quality
Grade: DC01
ST14,ST15,ST16,DC01,DC03,DC04,DC05,DC06,etc.
Thickness: 0.12-12.0mm
Width: 600-1500mm
Coil weight: 3-34MT/Coil or as your request
MOQ: 3-5 MT
Packaging: Export standard, seaworthy
ID: 508mm or 610mm
Trade Term: FOB, CFR, CIF, EXW ETC.
Transport Type: Container, bulk and train
Standard Grade General Size Delivery Condition
ASTM A36 A36/A36-B 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A283 A283-B/A283C 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A572 A572Gr50-B/A572Gr42-B 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A515 A515Gr70 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A516 A516Gr70 5-20 * 2300-2500 * C Boron added or Black Condition
ST37 steel (1.0330 material) is a cold formed European standard cold rolled high-quality low-carbon steel plate. In BS and DIN EN 10130 standards, it includes five other steel types: DC03 (1.0347), DC04 (1.0338), DC05 (1.0312), DC06 (1.0873) and DC07 (1.0898). The surface quality is divided into two types: DC01-A and DC01-B.
DC01-A: Defects that do not affect the formability or surface coating are allowed, such as air holes, slight dents, small marks, slight scratches and slight coloring.
DC01-B: The better surface shall be free of defects that may affect the uniform appearance of high-quality paint or electrolytic coating. The other surface shall meet at least surface quality A.
The main application fields of DC01 materials include: automobile industry, construction industry, electronic equipment and household appliances industry, decorative purposes, canned food, etc.
Commodity: ST37 Carbon steel coil
Standard: DIN GB JIS BA AISI ASTM EN GOST ETC.
Mechnical: Commercial / Drawing / Deep Drawing /Extra Deep Drawing/Structural quality
Surface treatment: Chromated and oiled, and ant-ifinger
Hardness: Softy, half hard ,hard quality
Grade: DC01
ST14,ST15,ST16,DC01,DC03,DC04,DC05,DC06,etc.
Thickness: 0.12-12.0mm
Width: 600-1500mm
Coil weight: 3-34MT/Coil or as your request
MOQ: 3-5 MT
Packaging: Export standard, seaworthy
ID: 508mm or 610mm
Trade Term: FOB, CFR, CIF, EXW ETC.
Transport Type: Container, bulk and train
* A36 steel (1.0330 material) is a cold formed European standard cold rolled high-quality low-carbon steel plate. In BS and DIN EN 10130 standards, it includes five other steel types: DC03 (1.0347), DC04 (1.0338), DC05 (1.0312), DC06 (1.0873) and DC07 (1.0898). The surface quality is divided into two types: DC01-A and DC01-B.
DC01-A: Defects that do not affect the formability or surface coating are allowed, such as air holes, slight dents, small marks, slight scratches and slight coloring.
* DC01-B: The better surface shall be free of defects that may affect the uniform appearance of high-quality paint or electrolytic coating. The other surface shall meet at least surface quality A.
* The main application fields of DC01 materials include: automobile industry, construction industry, electronic equipment and household appliances industry, decorative purposes, canned food, etc.
Commodity:
A36 Carbon steel coil
Standard:
DIN GB JIS BA AISI ASTM EN GOST ETC.
Mechnical:
Commercial / Drawing / Deep Drawing /Extra Deep Drawing/Structural quality
Surface treatment:
Chromated and oiled, and ant-ifinger
Hardness:
Softy, half hard ,hard quality
Grade : DC01
ST14,ST15,ST16,DC01,DC03,DC04,DC05,DC06,etc.
Thickness : 0.12-12.0mm
Width : 600-1500mm
Coil weight : 3-34MT/Coil or as your request
MOQ : 3-5 MT
Packaging : Export standard, seaworthy
ID : 508mm or 610mm
Trade Term : FOB, CFR, CIF, EXW ETC.
Transport Type : Container, bulk and train
Standard Grade General Size Delivery Condition
ASTM A36 A36/A36-B 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A283 A283-B/A283C 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A572 A572Gr50-B/A572Gr42-B 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A515 A515Gr70 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A516 A516Gr70 5-20 * 2300-2500 * C Boron added or Black Condition
JIS G 3101 SS400-B 5-20 * 2300-2500 * C Boron added or Black Condition
JIS G3136 SN400B 5-20 * 2300-2500 * C Boron added or Black Condition
EN10025-2:2004 S235JR-S355K2+N 5-20 * 2300-2500 * C Boron added or Black Condition
EN10025-5:2004 S355J2W/S355K2W 5-20 * 2300-2500 * C Boron added or Black Condition
SPHC steel (1.0330 material) is a cold formed European standard cold rolled high-quality low-carbon steel plate. In BS and DIN EN 10130 standards, it includes five other steel types: DC03 (1.0347), DC04 (1.0338), DC05 (1.0312), DC06 (1.0873) and DC07 (1.0898). The surface quality is divided into two types: DC01-A and DC01-B.
DC01-A: Defects that do not affect the formability or surface coating are allowed, such as air holes, slight dents, small marks, slight scratches and slight coloring.
DC01-B: The better surface shall be free of defects that may affect the uniform appearance of high-quality paint or electrolytic coating. The other surface shall meet at least surface quality A.
The main application fields of DC01 materials include: automobile industry, construction industry, electronic equipment and household appliances industry, decorative purposes, canned food, etc.
Commodity: SPHC Carbon steel coil
Standard: DIN GB JIS BA AISI ASTM EN GOST ETC.
Mechnical: Commercial / Drawing / Deep Drawing /Extra Deep Drawing/Structural quality
Surface treatment: Chromated and oiled, and ant-ifinger
Hardness: Softy, half hard ,hard quality
Grade: DC01
ST14,ST15,ST16,DC01,DC03,DC04,DC05,DC06,etc.
Thickness: 0.12-12.0mm
Width: 600-1500mm
Coil weight: 3-34MT/Coil or as your request
MOQ: 3-5 MT
Packaging: Export standard, seaworthy
ID: 508mm or 610mm
Trade Term: FOB, CFR, CIF, EXW ETC.
Transport Type: Container, bulk and train
Standard Grade General Size Delivery Condition
ASTM A36 A36/A36-B 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A283 A283-B/A283C 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A572 A572Gr50-B/A572Gr42-B 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A515 A515Gr70 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A516 A516Gr70 5-20 * 2300-2500 * C Boron added or Black Condition
JIS G 3101 SS400-B 5-20 * 2300-2500 * C Boron added or Black Condition
JIS G3136 SN400B 5-20 * 2300-2500 * C Boron added or Black Condition
EN10025-2:2004 S235JR-S355K2+N 5-20 * 2300-2500 * C Boron added or Black Condition
EN10025-5:2004 S355J2W/S355K2W 5-20 * 2300-2500 * C Boron added or Black Condition
SS400 steel (1.0330 material) is a cold formed European standard cold rolled high-quality low-carbon steel plate. In BS and DIN EN 10130 standards, it includes five other steel types: DC03 (1.0347), DC04 (1.0338), DC05 (1.0312), DC06 (1.0873) and DC07 (1.0898). The surface quality is divided into two types: DC01-A and DC01-B.
DC01-A: Defects that do not affect the formability or surface coating are allowed, such as air holes, slight dents, small marks, slight scratches and slight coloring.
DC01-B: The better surface shall be free of defects that may affect the uniform appearance of high-quality paint or electrolytic coating. The other surface shall meet at least surface quality A.
The main application fields of DC01 materials include: automobile industry, construction industry, electronic equipment and household appliances industry, decorative purposes, canned food, etc.
Commodity: SS400 Carbon steel coil
Standard: DIN GB JIS BA AISI ASTM EN GOST ETC.
Mechnical: Commercial / Drawing / Deep Drawing /Extra Deep Drawing/Structural quality
Surface treatment: Chromated and oiled, and ant-ifinger
Hardness: Softy, half hard ,hard quality
Grade: DC01
ST14,ST15,ST16,DC01,DC03,DC04,DC05,DC06,etc.
Thickness: 0.12-12.0mm
Width: 600-1500mm
Coil weight: 3-34MT/Coil or as your request
MOQ: 3-5 MT
Packaging: Export standard, seaworthy
ID: 508mm or 610mm
Trade Term: FOB, CFR, CIF, EXW ETC.
Transport Type: Container, bulk and train
Standard Grade General Size Delivery Condition
ASTM A36 A36/A36-B 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A283 A283-B/A283C 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A572 A572Gr50-B/A572Gr42-B 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A515 A515Gr70 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A516 A516Gr70 5-20 * 2300-2500 * C Boron added or Black Condition
JIS G 3101 SS400-B 5-20 * 2300-2500 * C Boron added or Black Condition
JIS G3136 SN400B 5-20 * 2300-2500 * C Boron added or Black Condition
EN10025-2:2004 S235JR-S355K2+N 5-20 * 2300-2500 * C Boron added or Black Condition
EN10025-5:2004 S355J2W/S355K2W 5-20 * 2300-2500 * C Boron added or Black Condition
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
* SGCH steel (1.0330 material) is a cold formed European standard cold rolled high-quality low-carbon steel plate. In BS and DIN EN 10130 standards, it includes five other steel types: DC03 (1.0347), DC04 (1.0338), DC05 (1.0312), DC06 (1.0873) and DC07 (1.0898). The surface quality is divided into two types: DC01-A and DC01-B.
DC01-A: Defects that do not affect the formability or surface coating are allowed, such as air holes, slight dents, small marks, slight scratches and slight coloring.
DC01-B: The better surface shall be free of defects that may affect the uniform appearance of high-quality paint or electrolytic coating. The other surface shall meet at least surface quality A.
The main application fields of DC01 materials include: automobile industry, construction industry, electronic equipment and household appliances industry, decorative purposes, canned food, etc.
Commodity : SGCH Carbon steel coil
Standard: DIN GB JIS BA AISI ASTM EN GOST ETC.
Mechnical : Commercial / Drawing / Deep Drawing /Extra Deep Drawing/Structural quality
Surface treatment : Chromated and oiled, and ant-ifinger
Hardness : Softy, half hard ,hard quality
Grade : DC01
ST14,ST15,ST16,DC01,DC03,DC04,DC05,DC06,etc.
Thickness : 0.12-12.0mm
Width : 600-1500mm
Coil weight : 3-34MT/Coil or as your request
MOQ : 3-5 MT
Packaging : Export standard, seaworthy
ID: 508mm or 610mm
Trade Term : FOB, CFR, CIF, EXW ETC.
Transport Type : Container, bulk and train
DC01 steel (1.0330 material) is a cold formed European standard cold rolled high-quality low-carbon steel plate. In BS and DIN EN 10130 standards, it includes five other steel types: DC03 (1.0347), DC04 (1.0338), DC05 (1.0312), DC06 (1.0873) and DC07 (1.0898). The surface quality is divided into two types: DC01-A and DC01-B.
DC01-A: Defects that do not affect the formability or surface coating are allowed, such as air holes, slight dents, small marks, slight scratches and slight coloring.
DC01-B: The better surface shall be free of defects that may affect the uniform appearance of high-quality paint or electrolytic coating. The other surface shall meet at least surface quality A.
The main application fields of DC01 materials include: automobile industry, construction industry, electronic equipment and household appliances industry, decorative purposes, canned food, etc.
Commodity: DC01 Carbon Steel Coil
Standard: DIN GB JIS BA AISI ASTM EN GOST ETC.
Mechnical: Commercial / Drawing / Deep Drawing /Extra Deep Drawing/Structural quality
Surface treatment: Chromated and oiled, and ant-ifinger
Hardness: Softy, half hard ,hard quality
Grade: DC01
ST14,ST15,ST16,DC01,DC03,DC04,DC05,DC06,etc.
Thickness: 0.12-12.0mm
Width: 600-1500mm
Coil weight: 3-34MT/Coil or as your request
MOQ: 3-5 MT
Packaging: Export standard, seaworthy
ID: 508mm or 610mm
Trade Term: FOB, CFR, CIF, EXW ETC.
Transport Type: Container, bulk and train
Standard Grade General Size Delivery Condition
ASTM A36 A36/A36-B 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A283 A283-B/A283C 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A572 A572Gr50-B/A572Gr42-B 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A515 A515Gr70 5-20 * 2300-2500 * C Boron added or Black Condition
ASTM A516 A516Gr70 5-20 * 2300-2500 * C Boron added or Black Condition
JIS G 3101 SS400-B 5-20 * 2300-2500 * C Boron added or Black Condition
JIS G3136 SN400B 5-20 * 2300-2500 * C Boron added or Black Condition
EN10025-2:2004 S235JR-S355K2+N 5-20 * 2300-2500 * C Boron added or Black Condition
EN10025-5:2004 S355J2W/S355K2W 5-20 * 2300-2500 * C Boron added or Black Condition
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
5419 Steel Coils Suppliers
Short on time? Let Steel Coils sellers contact you.
