(1) Grade 301 Good ductility, used for molded products. It can also be hardened by mechanical processing. Good weldability. Wear resistance and fatigue strength are better than grade 304 stainless steel, used in products such as springs, steel structures, wheel covers.
(2) Grade 302:The corrosion resistance is the same as grade 304, and the strength is better due to the relatively high carbon content.
(3) Grade 303:It is easier to cut than grade 304 by adding a small amount of sulfur and phosphorus.
(4) Grade 304: It is a stainless steel that is non-magnetic and cannot be changed by heat treatment. The standard composition is 18 % chromium plus 8 % nickel. Used in products such as: corrosion-resistant containers, tableware, furniture, railings, medical equipment, some mobile phone frames.
(5) Grade 304L:It has the same characteristics as grade 304, but with low carbon, it is more resistant to corrosion and easy to heat treatment, but has poor mechanical properties. It is suitable for welding and products that are not easy to heat treatment.
(6) Grade 304N:With the same characteristics as grade 304, it is a nitrogen-containing stainless steel. Nitrogen is added to increase the strength of the steel.
(7) Grade 309:Better temperature resistance than grade 304.
(8) Grade 309S:With a large amount of chromium and nickel, it has good heat resistance and oxidation resistance, and is used in products such as heat exchangers, boiler components, and jet engines.
(9) Grade 310S:Contains the most chromium and nickel, so it has the best heat resistance and oxidation resistance. It is used in products such as heat exchangers, boiler components, and electrical equipment.
(10) Grade 316: After grade 304, the second most widely used steel grade, mainly used in the food industry and surgical equipment, the addition of molybdenum gives it a special structure that is resistant to corrosion. Because of its better resistance to chloride corrosion than grade 304, it is also used as "marine steel". SS316 is usually used in nuclear fuel recovery units. Grade 18/10 stainless steels generally also meet this application level. Especially used in chemical, seaside and other corrosive environments, ship assembly, building materials.
(11) Grade 316 L: Low carbon, so it is more resistant to corrosion and easy to heat treatment. It is used in products such as chemical processing equipment, nuclear power generators, and refrigerant storage tanks.
(12) Grade 321:Similar to grade 304, except that the risk of corrosion of the material weld is reduced due to the addition of titanium elements, suitable for welding. Used in products such as brewing equipment, steam pipes, aerospace parts.
(13) Grade 347 The stabilizing element niobium is added and is mainly used for welded parts used at high temperatures.
CONTENTS SPECIFICATIONS
Base Metal Cold Rolled, Galvanised, Aluminium zinc Alloy, Stainless Steel and Aluminium
Thickness - TCT 0.18 to 1.25 mm *
Width 600 to 1500 mm
Coil ID 508 and 610 mm
* This product has a painted finish that is uniform in colour, gloss, texture & thickness, with excellent paint adhesion and durability. Coils can be readily rollformed, bent, pressed, cut, drilled, lock-seamed and stamped without degradation in the quality of the paint
CONSTRUCTION
Cladding/siding, Roofing, Sliding shutter, Building accessories, Doors, Partitions, Canopies of gas stations, False ceiling, Prefabricated buildings, Sandwich panels, Bill boards
HOUSEHOLD APPLIANCES
Washing (washing machine & tumble dryer), Cooking (oven & microwave oven), Cold (Refrigerator, freezer, visi cooler, water cooler), Electric Application (griller, toaster, air conditioner)
We are a well established organization engaged in offering an outstanding range of Stainless Steel Ring to our valued patrons. Best quality stainless steel is used to manufacture these products. The range of products is manufactured using modern machines, at our vendorsâ?? base. Appreciated for their lastingness, corrosion resistance and high strength, this product is widely demanded in the national as well as international market. We are able to offer this product to our customers in perfect packaging
Being a reckoned name, we are engaged in manufacturing and supplying Stainless Steel Patta. These products are manufactured at our workplace with the help of advanced machinery. Owing to their accurate dimensions and sturdy design, these products are availed by a huge client base. Our customers can make use of these products in construction applications.
Stainless Steel Circles:- 304/L/H/LN, 316/L/H/LN/Ti, 317L, 321/H, 347/H, 309, 310, 904L. 409/L, 410, 430/Ti, 436, 439.
Cold rolling coil
Steel brand: Q235, Q195, Q195L, Q195LD, 08AL, SPCC
Thickness: 0.18mm-3.0mm
Width: 0-780mm
Width tolerance: different as per different width
Thickness tolerance: different as per different thickness
Hardness of steel coil: >95HV (softened and hardened we can offer)
Weight: 3-9MT/C (or according to the customerí»s requirement)
Surface: General, Bright, Dull and Mirror finish, oiled or unoiled
Packing: Standard exporting packing with edge protector, steel hoop and seals, or as per customer's requirements
Cold rolling coil
Steel brand: Q235, Q195, Q195L, Q195LD, 08AL, SPCC
Thickness: 0.18mm-3.0mm
Width: 0-780mm
Width tolerance: different as per different width
Thickness tolerance: different as per different thickness
Hardness of steel coil: >95HV (softened and hardened we can offer)
Weight: 3-9MT/C (or according to the customerí»s requirement)
Surface: General, Bright, Dull and Mirror finish, oiled or unoiled
Packing: Standard exporting packing with edge protector, steel hoop and seals, or as per customer's requirements
Triply Stainless Steel Circle SS304+Aluminum1060+SS430 Claded Circle For Cookware
Composited by SS 304 + Pure Al + SS430
Thickness: 2.0 /2.3 / 2.5 / 2.8 / 3.0 / 4.0 mm
MAX DIA: �?800 mm
Triply/5-ply circles are used in 3PLY/5PLY cookwares for even conductivity and distribution of heat during cooking. 3 or 5 different metals are composited together using special technology and then cut in blanks/circles for making utensils.
Triply Stainless Steel Circle SS304+Aluminum1060+SS430 Claded Circle For Cookware
Composited by SS 304 + Pure Al + SS430
Thickness: 2.0 /2.3 / 2.5 / 2.8 / 3.0 / 4.0 mm
MAX DIA: �?800 mm
Triply/5-ply circles are used in 3PLY/5PLY cookwares for even conductivity and distribution of heat during cooking. 3 or 5 different metals are composited together using special technology and then cut in blanks/circles for making utensils.
MATERIAL: SS304 + ALUMINUM + SS430
Triply/5-ply circles are used in 3PLY/5PLY cookwares for even conductivity and distribution of heat during cooking. 3 or 5 different metals are composited together using special technology and then cut in blanks/circles for making utensils.
We're professional TRIPLY STAINLESS STEEL CIRCLE manufacturers and suppliers in China, specialized in providing high quality customized products. We warmly welcome you to buy or wholesale cheap TRIPLY STAINLESS STEEL CIRCLE for sale here from our factory.
Triply/5-ply circles are used in 3PLY/5PLY cookwares for even conductivity and distribution of heat during cooking. 3 or 5 different metals are composited together using special technology and then cut in blanks/circles for making utensils.
1.Material 201/201/203/304/304L/309/309/309S/310/310S/316/316L/410/430,ect
2.Standard ASTM,GB,JIS,ect
3.Thickness 0.3-100mm
4.Width 600-1524mm
5.Length 1000-6000mm or as customer�¢??s requirement
6.Surface finished 2B/BA/HAIRLINE/8K/NO.4/NO.1
7.Technique Cold rolled/hot rolled
8.Packing Craft paper+steel plate packing
9.Productivity 5000T/M
10.Payment TT/LC/Western union
11.Delivery time 10-15days after received the deposit
12.Loading port Foshan port,Guangzhou port,Shenzhen port(China)
13.MOQ 5tons
14.Application A. Automotive Trim and Molding
B. Builders Hardware, Fasteners ,and Furnace Parts
C. Interior Architectural Trim and Paneling
D. Kitchen Trim and Equipment
E. Zippers, Vaults, and Tubing
F. Machinery, Television Cones, and Storage Vessels
Steel coil- a finished steel product such as sheet or strip which has been wound or coiled after rolling. ... Hot-rolled coil is produced from semi-finished products , which are reduced to certain thicknesses by rolling and annealing and wound into a roll.
