We are dealing with thermal spray wires such as nicrti wire for boiler. And our standard packing is 15 kgs per spool. Normally we have them in stock.
We are dealing with thermal spray wires such as stainless steel 420 wire. And we have 3 tons in stock with size 1.6mm. And our standard packing is 15 kgs per spool.
We are dealing with thermal spray wire such as cual8 wire. And normally we have them in stock. Our standard packing is 15 kgs per spool.
We are dealing with thermal spray wire such as babbit wire used for turbine. And now normally we have 1.6mm babbitt wire in stock, and our standard packing is 15 kgs per spool.
Metals ferrous and non ferrous, such as : aluminium ingots a7, copper cathodes 99.9% , copper milberry scrap 99.7%, hms 1&2, iron ore 62 64%, nickel wire etc., rapeseed oil, sunflower oil, corn oil, peanut oil, coal.
Tyre bead wire is a high quality carbon metal. It is incorporated in the structure of the tyre to withstand bumps, heat and other hazardous conditions. radial tyre bead wire is 1.6 mm and nylon tyre bead wire is 1.10mm. Therefor, the wire obtained from end of life tyres is also of high quality matieral and resuing it can be a highly lucrative for the businesses as well as the environment. Scrap Bead Wire is used in converting to shot blasting, high tension springs, wire mesh, wire baskets, nails, cutting tools. Since this is extracted from tyres it is available at a very reasonable rates. A Scrap truck or Bus Tyre consists of 20-25% of high quality steel in it. The metal bead wire is obtained when the waste tyre is put into the shredding machines. It is very important to derive the bead wire in one single piece. The wire can easily be oxidised so protecting it from different atmospheric agents is important. So to meet our clients' expectations, we have set strict standards and quality control techniques. )
This steel has a high carbon content and is of good grade. It is built into the construction of the tyre to endure bumps, heat, and other potentially dangerous situations. As a result, recycled tyre wire is of very high quality and meets industry standards. To prevent machines farther down the processing line from usury, contemporary technologies tend to remove the wire as soon as possible. Pre-shredding is commonly followed by a first granulation step, in which the rubber chips are filtered through a 15 to 25 mm screener, depending on the plant layout. A magnetic mechanism separates the steel wire from the rubber immediately after this granulation. Along with the wires, 10 to 35 percent by weight of rubber and textiles are removed, hence the total material recovery varies depending on the contamination grade of the material (rubber/fiber). Steel typically makes up 10% to 20% of the weight of an old passenger car tyre. A typical shredding factory generates huge quantities of steel tyre wire, with quality varying depending on the technology, storage, and management systems used by the factories. Another important component in assessing the material's quality is the steel's resistance to atmospheric agents. The material is quickly oxidised since it is shaped in tiny wires. As a result, protecting the wire from any atmospheric contaminants is an important part of improving its quality.
Because the mesh belt is zigzag design,with the characteristics of good water permeability, air permeability and non-revealed sludge, acid-resistance, alkali-resistance, heat resistance under 180 degrees. Sludge and mesh strip peel quickly, not easy to stick mud, a large number of mud, easy to clean, fast and convenient connection, long life of the mesh. This is designed for sludge dewatering products.
For hexagonal metal wires with galvanized layer, use metal wires with a wire diameter of 0.3mm to 2.0mm. If it is a PVC-coated metal wire woven twisted mesh, use PVC with an outer diameter of 0.8mm to 2.6mm. (metal) wire. Twist it into a hexagonal shape, and the lines on the edge of the outer frame can be made into single-sided, double-sided, movable edge wires. English name hexagonal wire netting hexagonal wire mesh Weaving method: forward twist, forward and reverse twist (reverse twist). characteristic: (1) Easy to use, just tile the mesh into the wall or building cement to use (2) Construction is simple and no special skills are required (3) Strong ability to withstand natural damage, corrosion and harsh weather effects (4) It can withstand a wide range of deformation without collapse. Acts as fixed thermal insulation (5) Excellent process foundation ensures uniformity of coating thickness and stronger corrosion resistance (6) Save transportation costs: it can be reduced into a small roll and wrapped in moisture-proof paper, taking up very little space. (7) Heavy-duty twisted mesh is woven with high-quality low-carbon steel wires, galvanized large wires, the tensile strength of the steel wires is not less than 38kg/m2, the diameter of the steel wires can reach 2.0mm-3.2mm, and the surface of the steel wires is usually hot-plated Zinc protection, the thickness of the galvanized protective layer can be made according to customer requirements, and the maximum galvanizing amount can reach 300g/m2. (8) Galvanized wire plastic-coated twisted mesh is to cover the surface of galvanized iron wire with a PVC protective layer and then weave it into various specifications of twisted mesh. This PVC protective layer will greatly increase the service life of the net, and through the selection of different colors, it can blend with the surrounding natural environment.
For hexagonal metal wires with galvanized layer, use metal wires with a wire diameter of 0.3mm to 2.0mm. If it is a PVC-coated metal wire woven twisted mesh, use PVC with an outer diameter of 0.8mm to 2.6mm. (metal) wire. Twist it into a hexagonal shape, and the lines on the edge of the outer frame can be made into single-sided, double-sided, movable edge wires. English name hexagonal wire netting hexagonal wire mesh Weaving method: forward twist, forward and reverse twist (reverse twist). characteristic: (1) Easy to use, just tile the mesh into the wall or building cement to use (2) Construction is simple and no special skills are required (3) Strong ability to withstand natural damage, corrosion and harsh weather effects (4) It can withstand a wide range of deformation without collapse. Acts as fixed thermal insulation (5) Excellent process foundation ensures uniformity of coating thickness and stronger corrosion resistance (6) Save transportation costs: it can be reduced into a small roll and wrapped in moisture-proof paper, taking up very little space. (7) Heavy-duty twisted mesh is woven with high-quality low-carbon steel wires, galvanized large wires, the tensile strength of the steel wires is not less than 38kg/m2, the diameter of the steel wires can reach 2.0mm-3.2mm, and the surface of the steel wires is usually hot-plated Zinc protection, the thickness of the galvanized protective layer can be made according to customer requirements, and the maximum galvanizing amount can reach 300g/m2. (8) Galvanized wire plastic-coated twisted mesh is to cover the surface of galvanized iron wire with a PVC protective layer and then weave it into various specifications of twisted mesh. This PVC protective layer will greatly increase the service life of the net, and through the selection of different colors, it can blend with the surrounding natural environment.
Electrical Wires And Cables And Also Non Ferrous Metals..Trading.
These cables are manufactured as per EN 50214 Stardard Lengths - 1,000 Mtrs. packed in wooden drums. Approximate Weight - 300 kgs / Km.
Fly ash, metal wires.Exporter
Electroplating gi wire and binding wire manufacturing and supplier.
Bead wire.
Pure Zinc Wire.
Enameled wires .
Wires (of various colors, sizes and materials) used in making jewelry and sell to both local and international customers as well..
Zinc wires.Manufactures
Metallic yarn (M, MX, MH, MHS, STA, SAC-type).
