Primary Heavy Duty Polyurethane Belt Cleaner The BuMtresD heavy duty conveyor pre-cleaners can tackle the bulk material transportation worksite with fast running belt and heavy load demand. The blades provides better cleaning effects for high-speed belts, large head pulleys and large sizes and volumes of material, typically found in (above and below ground mining).
Used for packing heavy goods like pallets, bricks, pavers blocks and many more product. This strap is made of only Plastic and give option for steel strapping. very easy to use. cheaper in compare of steel strap. UV protected.
This product is used for wind/ water protection. it can be used on aluminum windows and doors and PVC profiles. based on the customers requirement, many sizes and dimensions are available
Polyester Woven Strapping 13mm to 25mm width , with strength of 450daN to 1900daN Woven strapping belts are made of high tensile polyester yarns. Due to its material characteristics it has low elongation (below 10%), is highly tear proof and absorbs very little moisture. Furthermore the strapping can be retensioned in case of volume loss in the packaged goods and has a high breaking load, linear and within the system. Woven strapping belts will not splice, are flexible and universally applicable. Specifications no damage to most surfaces no corrosion & easy handling low investment cost high shock absorption a small, manageable system limited resistance against lyes and acids no risk of injury for shippers and consignees in using or opening the strapping available width 13mm to 25mm linear breaking strength available from 295 to 1500 daN special glue coating for usage for baling press machines available with special glue coating
Polyester Woven Strapping 13mm to 25mm width , with strength of 450daN to 1900daN Woven strapping belts are made of high tensile polyester yarns. Due to its material characteristics it has low elongation (below 10%), is highly tear proof and absorbs very little moisture. Furthermore the strapping can be retensioned in case of volume loss in the packaged goods and has a high breaking load, linear and within the system. Woven strapping belts will not splice, are flexible and universally applicable. Specifications no damage to most surfaces no corrosion & easy handling low investment cost high shock absorption a small, manageable system limited resistance against lyes and acids no risk of injury for shippers and consignees in using or opening the strapping available width 13mm to 25mm linear breaking strength available from 295 to 1500 daN special glue coating for usage for baling press machines available with special glue coating
Strapping Tensioner for straps up to 50mm ( 2" ) The market of tensioner is already overflown with cheap models made in China. Our T-50 tensioner is made in China too, but it contains advanced German engineering and knowledge. While most of the cheap models are based on a ratchet system our model is equipped with two anti cycling one-way bearings. These bearings make the tensioner more durable and easier to handle. Less force is needed during the tensioning. The special designed breakle shoe is made for all our strapping systems. High quality composite will be protected. The integrated stainless steel cutter will easily cut any belt.
Strapping Ratchet for straps from 30 to 50mm ( 1 1/5 to 2" ) May the force be with you... Heavy-duty challenges needs heavy-duty tools. The RT- 50 XXL Ratchet is made for tensioning big and strong belts. This ratchet type tensioner can be used for any kind of strapping system of 25 to 50 mm width. The design of these big tools is made to be as light weighted as possible and the wide tension angle gives you maximum tensioning strength at minimum force. Not beautiful but very effective.
Description HUATAO AEROGEL is the most effective high-temperature insulation material in the industrial market, typically 2-5 times thinner than other widely used insulation products. It is our easiest product ever to handle, store, and install. Specification Material:Nano Silica Aerogel Color: White Density: 180-220kg/m3 Applicable Temperature: -200 ~ +1000 Hydrophobicity: Absolute Hydrophobicity (Below 350) Thermal Conductivity: 0.012 - 0.018w/mk (At 25) Low Temperature Bending: 99% Breaking Elongation: 65% Bending Strength: 45KP Compressive Strength: 32N Transfer Printing Felt Aluminum Extrusion Felt Roller Cover Endless Belts Felt Pads aerogel aerogel blanket aerogel insulation blanket aerogel particles and powder silica aerogel blanket aerogel insulation new insulation materials thermal insulation materials Aerogel Insulation Blanket Huatao HT650 Aerogel Blanket Huatao HT200 Aerogel Blanket Aerogel Particles and Powders Aerogel Insulation Blanket with Aluminium Foil Aerogel Fiberglass Insulation Blanket
33-H-4318+2pu ,Senduori specializes in the production of timing belts for glass edgers, beveling machines, and straight edge machines.
Kevlar Conveyor Belt For Aluminum Extrusion Description Seamless Kevlar Felt Conveyor Belt also called 100% kevlar felt belt, kevlar belt, high temperature felt belt, belt for aluminum extrusion. The Kevlar felt belt is suitable for first-class and second-class cooling bed of felt belt type production line. The felts provided by our company have good resistance to hardening and abrasion and the highest temperature resistance reaches 500 ° C (carbonization temperature). The company's rolling Kevlar fiber produced by the United States DuPont. Available in green (Kevlar + carbon) and yellow (100% Kevlar) materials for use on sliding tables in aluminum extrusion press cooling beds. This product features similar to Kevlar conveyor belts and is mainly used in the high temperature areas of translation step cooling beds. Specification Color:Yellow Material:Kevlar + one layer base cloth Temperature Resistance:500? Available size:As your demands Commonly used thickness recommend:8mm Color:white yellow green brown Advantage 1 Heat resistant up to 500? 2 No elongation under high tension and heavy load 3 No seam, splice or joints: no breaks due to weak zone,High density structure 4 Smooth and even belt surface: scratch-free extrusions 5 Excellent belt tracking on the cooling table 6 Low heat conductivity and high density with good wear resistance and impact resistance property under heavy conditions Applied environment Corrosion resistance, acid resistance, heat resistance, moisture proof, oil resistant, alkali resistant, antistatic and wear resistant, resistant to burn, hardy, slip resistance, flame retardant, resistance to high temperature
Description: Kevlar endless belts are mainly used in pick-up and the first-stage cooling table. Our Kevlar endless belt is very good in temperature resistance (500?)and anti-abrasion. Specification: Material:PU felt+synchronous belt(hot melt bonding) Temperature Resistance:180?600? Length:2000mm25000mm Width:20mm200mm Total Thickness:6mm 8mm 10mm 12mm Feature:Strong tension,no deviation,non slip,low noise Application Area:2500T10000T Extrusion production line Application: Mostly suitable for the aluminum profiles with the high quality surface requirement,avoid the loss in second operation's and transit bumps or rub when in roduction. Company Name:HUATAO
100% Nomex Heat Transfer Endless Belt Description: Heat Transfer Printing Belts are produced from 100% Nomex fiber. They are the most important component of the heat transfer printing machines. We can offer the felts with the normal and special size according to customer?s request. Felt Features: needled felt, smooth surface,elastic, non-off tracking. Heat Transfer Printing Felts are used on the following machines : Monti, Lemaire, Bater, Stork, Futanet, Gessner etc. Specification: Material:100%Nomex Temperature:220°c ~ 280°c Colors:White Density:2800g/m2- 3600g/m2 Function:Belt Conveyor Part Place Of Origin:China Delivery Time:Within 15 Days Delivery After Receipt Your Payment Advantage 1. Selection Of Brand Raw Material,Common Specifications Have Temperature 160-180? And 220-280?. 2. The Felt Belt Contains Heat Shrinkable Fiber Material Inside,The Felt Will Automatically Shrink After Heating,Wrapped Tightly. 3. The Belt Surface Formation,Uniform Density,Good Resistance,Long Work Life. Application 1. Selection Of Brand Raw Material,Common Specifications Have Temperature 16-180? And 220-280?. 2. The Felt Belt Contains Heat Shrinkable Fiber Material Inside,The Felt Will Automatically Shrink After Heating,Wrapped Tightly. 3. The Belt Surface Formation,Uniform Density,Good Resistance,Long Work Life. Direction of our felt belt 1. The blanket must be install as the direction of the arrow, fixing both sides of the perimeter to see if the perimeter is the same. 2. Adjust the machine pressure within 2kg. heat up to 150 ?, idle for 2 hours; heat up to 170?, idle for 2 hours; heat up to 190?, idle 3 hours( important); heat up to 200?, idle for 2 hours. 3. Then the belt will suitable for your machine, you can adjust the machine pressure in 3--5kg according to your needed and start to printing.
Description Fabrics shrinkage tube sleeve felt palmers for monfort machine are used in calender roller, material Made from polyester or aramid fibres, felt sleeve 8 mm-12mm thickness. They have seamless construction to leave no imprints and are fleece-layered to give fabric a softer, fuller hand Speocification Material Aramid or Polyester Thickness 8-12mm Working temperature 180�C - 220�C Application: Needle felt for sanforizing are used on the following machines : Monforts, Morrison, Muzzi, Sperotto Rimar, Bisio, Cibitex, Mather & Platt, Farmer & Norton, Monti, Tepa, Swastik, Dhall, Swastik, Thakore, Yamuna, Ronson, I Kuang, Poong Kwang, etc. Company Name:HUATAO
scription Aerogel Inaulation Blanket is one of our hot sale products.It has chosen the acupuncture fiber as substrate, and then the aerogel is compounded into the substrate. It has the thermal insulation performance and surface hydrophobicity and excellent flame retardant properties. The thermal conductivity at room temperature in 0.016 (W/m.K), is lower than the static air; The aerogel product is of high hydrophobicity; at room temperature, the water repellent rate of can be up to 99%; Excellent flame retardant performance, and fire rating has met the national A1 standard. And the temperature of the product using range is wide, Joda Aerogel fiberglass blanker could be used according to the different requirements in -200 ~ 650 DEG C for adiabatic pipe and tank, using the furnace of industrial equipment and pipeline. Specification Material:Nano Silica Aerogel Color: White Density: 180-220kg/m3 Applicable Temperature: -200 ~ +1000 Hydrophobicity: Absolute Hydrophobicity (Below 350) Thermal Conductivity: 0.012 - 0.018w/mk (At 25) Low Temperature Bending: 99% Breaking Elongation: 65% Bending Strength: 45KP Compressive Strength: 32N Advantages Optimized thermal conductivity in high temperature service Faster application, especially on large-bore piping and vessels Addresses tight, hard-to-insulate spaces with outstanding thermal efficiency Flexible blanket material won't crack, sag, or settle in high-temperature service Stands up to vibration, footfalls, and tool strikes Tough enough for reuse after removal and inspection
Product introduction: High temperature felt roller is mainly used for aluminum industry, the main function is to transport,transfer extruded aluminum profile. Our product can protect its surface and improve the quality and grade of aluminum. It is made of 100% Polyester.Its work temperature can up to 200 degrees for a long time or a short time. Specifications: Brand:HUATAO material : Polyester color:White Size:Make-to-order Work temperature:200 degrees Length: All size are available thickness :6mm~12mm Maximum internal diameter:168mm Minimum internal diameter:20mm Advantages: 1. Heat resistance up to 200�C 2. Anti-Pull 3. Long service life against high quality 4. Wear-Resistant 5. Eco-Friendly 6. Competitive price and good service after sales
Product introduction: High temperature resistant felt belt is often used in aluminum factory. Our product is made of PBO and Kevlar. It have heat resistance characteristics.Its temperature resistance can up to 600 degrees for a short time (about 15 minutes) and 550 degrees for a long time. Specifications: Brand:HUATAO material :PBO + kevlar + one layer Nomex tension member color:brown and yellow Size:Make-to-order Work temperature:600 degrees for a short time(15mins) 550 degree for a long time Length:900mm-25000mm Width:20mm-1700mm Thickness:5mm-15mm PBO Thickness: 2mm~8mm Advantages: 1. Temperature resistance up to 600�C; 2. High density structure; 3. Abrasion resistance with smooth cutting and even surface; 4. Long service life against high quality; 5. Pollution-free for extrusions; 6. Competitive price and good service after sales.
Product introduction: High temperature resistant felt belt is often used in aluminum factory. Our product is made of 100% Kevlar and one layer Nomex tension member. It have heat resistance characteristics.Its highest temperature resistance can up to 500 degrees. Specifications: Brand:HUATAO material :100% kevlar + one layer Nomex tension member color: yellow Size:Make-to-order Highest work temperature:500 degrees Length:540mm-13500mm Width:20mm-2000mm Thickness:6mm-12mm Advantages: 1.temperature resistance 500�C 2. soft and flat surface 3. Small weight, convenient storage 4. Easy to install, everyone can operate
Product introduction: This product is suitable for third-class and forth-class cooling bed. Our product is made of 100% Nomex and one layer Nomex tension member. It have heat resistance characteristics. Its highest temperature resistance can up to 300 degrees. Specifications: Brand:HUATAO material :100% Nomex + one layer Nomex tension member color: offwhite Size:Make-to-order Highest work temperature:500 degrees Length:1700mm-11000mm Width:20mm-1500mm Advantages: 1.Eco-friendly material 2.Anti-static 3.Good wearability 4. soft and flat surface 5. Small weight, convenient storage 6. Easy to install, everyone can operate 7. The blanket has no joint as a whole and there is no break zone 8. High density structure; Company Name:HUATAO Contact Person:Frank Zong Mob/Wechat/Whatsapp:+86 19930618603 Skype:huataogroup Email: Frank:export@huataogroup.com,Mob:+86 19930618603 Annie:annie.lu@huataogroup.com,Mob:+86 18032422676 Emma:sale04@huataogroup.com,Mob:+86 13383110252 Julie:team5@huataogroup.com,Mob:+86 17731189774 Lily:team7@huataogroup.com,Mob:+86 18033762592 Rebecca:marketing@huataogroup.com,Mob:+86 18033762592 Website: www.industrial-felts.com www.huataolover.com www.geosynthetic-fabric.com sjzht.bossgoo.com
Para-Aramid Industrial Felt Strip For Aluminum Extrusion Description Kevlar Pad Is made of 100% Kevlar fiber acupuncture,the color is yellow, the disintegration temperature is 480-500 â??, mainly used for extrusion of aluminum extrusion line on a moving beam of the cooling bed, with high temperature, wear-resistant, High density, non-delamination, lint-free, non-polluting aluminum profiles. Specificationï¼? Material:100%Kevlar Work Temperature:500°C Size:Make-to-order Usage:Aluminum Extrusion Initial Table Color:Yellow Hardness:Adding Resin Or Not Shape:Strip Technics:Needle Punched Applicationï¼? Similar to kevlar conveyor belt,applied to high-temperature region of translation step cooling table
Dryer screen dries paper web after passing a press section by adhering the web to a steam heated cylinder. Material: PET, PA, PPS. Used in the dryer section of paper machine to produce newprint paper, writing paper, carbonless paper, copper print, etc. Seam type: Insert, pin, ping ring, spiral ring join. Feature: 1. Long service life, wear resistance, the net loss is low. 2. High fatigue resistance, acid, weak alkali resistance. 3. The mesh mark light, forming quality is good. 4. Light weight, easy to transport, set net easy operation.
