Operating Voltage V: 4 ~ 6 Rated Voltage V: 5 Rated Current mA: Max. 80 Coil DC Resistance : 40 ± 5 Sound output ( at 10 cm ) dBA: Min. 90 Rated Frequency Hz: 2700 Operating Temperature º C: -20 ~ +70 Storage Temperature º C: -30 ~ +85 Terminal : SMD Housing Material / Color: LCP / Black Weight g: 0.9.
Sound output (at 10 cm) dBA: Min. 70 (3Vp-p, 4000Hz, Square Wave) Max. Input Voltage Vp-p: 25 Max. Current Consumption mA: 1.0 Capacitance ( at 120 Hz ) pF: 14000 pF ± 30 % Operating Temperature º C: -20 ~ +80 Storage Temperature º C: -30 ~ +85 Terminal : SMD Housing Material / Color : LCP/Black Weight g: 1.
• Large current • Low resistance • Small profile • High frequency and low loss • Common mode filter • Suitable for excellent EMI suppressor • All trademarks shown here are for reference purposes only. They are the property of their respective owners and we are not authorized to sell items bearing such trademarks. Carton.
• Size: 6 x 8, 8 x 10 and 9 x 12cm • With shrink tube • Customized requirements are accepted. Carton.
We are the professional fish finder transducer manufacturer in China a)Cable:8-20m. b)Frequence:50KHz,200KHz,50/200KHz c)Power:300-1000w d)Material:Bronze e)Connector: Pin3-Pin10 f)Compatible:Furuno,Garmin,Raymarine,Navman,Hondex,Humminbird,Koden etc. 26*14*9cm.
MCC-w Miniature load cell uses the stainless steel structure , High precision ,Low contour ,sealed waterproofing ,stable performance; has strongly anti-torsion , anti-side ability, is suitable in electronic weighing apparatus and so on for automobile scale, track scale, platform scale, bunker scale, crane, and compression testing machine. Specification: Range 20,30,50,100,200 ,300,500,1000 kg Bridge voltage :10 V(DC) Output signal :1.5 mV/V Non-linearity :0.5 % F¡¤S Hysteresis :0.5 % F¡¤S Non-repeatability :0.5 % F¡¤S Temperature dirft :0.05 F¡¤S/¡æ Zero output :¡Ü2 % F¡¤S Operating temperature :-20~80. Standard export package.
Item Specifics: Model: PIM1030R12MZ L0(uH)/inductance at 0A,100KH):Typ.:0.12 DCR (mª+)at 25ípC:Typ.0.65/Max:0.75 Irated(Adc)/Heat RatingCurrent :Typ.:30 Isat(Adc)/Saturation Current:Typ.:75 Available L0(uH):From 0.12 to 10.00 Molded Power Inductor Operating temperature : -55íµ ~ +125íµ Ambient Temperature, Maximum : 85íµ Temperature Rise, Maximum: 40íµ Features Low profile, high current SMD type. Lowest DCR/µH, in this package size, low buzz noise due to its gap-less structure, RoHS compliant. Frequency range up to 5MHz. Lowest DCR/µH, in this package size Low buzz noise due to its gap-less structure RoHS compliant. Applications Notebook/Desktop/Server/Video Card applications. High current POL converters. Low profile, high current power supplies Battery powered devices. Ideal for power source circuits, DC-DC converter DC-AC inverters inductor application. Note: 1. L0 is inductance tested at 0 Adc. 2. Isat is the DC current which cause the inductance drop approximately 30% of its nominal inductance without current. 3. Irated is the DC current which cause the surface temperature of the part increase appproximately than 40íµ. 4. Operating Temperature Range: - 55íµ to +125íµ 5. The part temperature (ambient + temp rise ) should not exceed 125íµ under worse case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provision all affect the part temperature. Part temperature should be verified in the end application. 6. The rated current as listed is either the saturation current or the heating current depending on which value is lower.
Features: Laminated ceramic allows high SRF Closed magnetic circuits Monolithic structure suitable for flow and reflow soldering High resistance to heat and humidity Operating temperature range: -40 to 105ípC Applications: Wireless communication Mobile telephones Video cameras and portable VCRs
Ultrasonic Transducers Name Method Eg, UCE-6845D-20LA PZT8 UCE mean our company logol. 68 is stand for the dimetions of radiation head, 45 is stand for the dimetions of the piezoelectric ceramic,PZT8 is mean the material of piezoelectric ceramic,PZT8 is yellow ceramic,PZT4 is black. Ultrasonic Transducers is one of main products of at UCE ultrasonic,which used the piezoelectric effort to realize transduction between electric and sound energy,also named as BLT transducer,ultrasonic transducer normally used in ultrasonic cleaning industry,high power ultrasonic etc.
1).Analog generator 1. Assembled from the imported electronic component of excellent qualities. 2. The advanced and reliable circuit protection way greatly enhances the complete reliability. 3. With the figure showed, fm and frequency can be compensated automatically . 4. With frequency departure, two tables indicating working current and protection feature 5. Interface connector is collocated according to the request's requests. 6. Simple structure, easy maintenance, reasonable price and excellent quality. 2).Digital smart generator Digital smart ultrasonic power adopts new monolithic integrated circuits to control, measure, compare and implement the parameter. It's frequency self-tracking, power adjustment and impedance adjustment can be precontroled, thus to realize many functions, including automatic scanning, tracking, automatic fault detection and protection and convenient and reliable operation.
Main characteristics: High efficiency: with high mechanical quality, it can achieve high transfer efficiency between electrical energy and acoustic energy when working at the point of resonance frequency. Large amplitude: after optimal designed by computer, the speed of vibration becomes high and the amplitude of front plate becomes large. High power: under the action of the prestressed bolts , piezoelectric ceramic energy reaches to the utmost. Good heat-resistance : of small resonance impedance, little quantity of heat, can be used in a wide range of temperature with long life and high reliability.
The ultrasonic transducer is a part that can transform the electrical energy to the mechanical energy (ultrasonic). The most mature and reliable product now is piezoelectric transducer, which transform between electrical energy and the sound energy by the piezoelectric effect. It is composed of the central piezoelectricity ceramic component, metal cover board in front and back, the pre-stressed force screw rod, the electricity pole piece and the insulation tube. This kind of transducer (bolt fastening transducer), shapes in sandwich, can generate the stable ultrasonic wave while the load changed. It is the most essential and the main method to obtain the power ultrasonic generator. According to the different designation, it can be divided into columnar type (the diameter of the metal cover board in front and back are the same), upside-down the trumpet (front cover board diameter to minish gradually through the arc), the columnar type steel with post operculum, and the columnar type with nodal point and so on. Standard
Ip/ep converter Ip/ep transducer Electropneumatic transducer Input electrical current:4-20ma, 0-10v Output pressure:20-100kpa Et-500 is electropneumatic transducer equipment, it can decrease supply pressure to produce output pressre which is effectively proportional to input electric signal. Supply pressure range:125kpaí½1000kpa.With bulk augmenter supply big flow (20.4 m3/h). Features: Flow rate: 7.6m3/h when supply pressure is 175kpa 20.0m3/h when supply pressure is 700kpa Min/max. Supply pressure: Minimum-3psig(21kpa) above maximum output Maximum-100psig(700kpa) Sensitivity:
Electropneumatic transducer Input electrical current:4-20ma, 0-10v Output pressure:20-100kpa Et-500 is electropneumatic transducer equipment, it can decrease supply pressure to produce output pressre which is effectively proportional to input electric signal. Supply pressure range:125kpaí½1000kpa.With bulk augmenter supply big flow (20.4 m3/h). Features: Flow rate: 7.6m3/h when supply pressure is 175kpa 20.0m3/h when supply pressure is 700kpa Min/max. Supply pressure: Minimum-3psig(21kpa) above maximum output Maximum-100psig(700kpa) Sensitivity:
Ll1608-fsl3n9s Toko make Pack:2k/reel Datecode:09+rohs L/t:1-7days Weight:0.2kg Reel package
Siamatc sitop power.
Et-500 electropneumatic transducer Input electrical current:4-20ma, 0-10v Output pressure:20-100kpa Et-500 is electropneumatic transducer equipment, it can decrease supply pressure to produce output pressre which is effectively proportional to input electric signal. Supply pressure range:125kpaí½1000kpa.With bulk augmenter supply big flow (20.4 m3/h). Features: Flow rate: 7.6m3/h when supply pressure is 175kpa 20.0m3/h when supply pressure is 700kpa Min/max. Supply pressure: Minimum-3psig(21kpa) above maximum output Maximum-100psig(700kpa) Sensitivity:
The platform measures the three orthogonal force components along the X, Y, and Z axes, and the moments about the three axes, producing a total of six outputs. The high sensitivity, low crosstalk, excellent repeatability and long term stability of this platform makes it ideal for research and clinical studies. The JP5050 is easy to use and is available in 5,000 Newton vertical capacity. Fx, Fy Capacity (N): 2.5 KN Fz Capacity (N): 5 KN Mx Capacity (Nm): 1 KNm My Capacity (Nm): 1.5 KNm Mz Capacity (Nm): 0.75 KNm Fx, Fy Sensitivity (µV/[V*N]): 0.30 Fz Sensitivity (µV/[V*N]): 0.12 Mx, My Sensitivity (µV/[V*Nm]): 0.25 Mz Sensitivity (µV/[V*Nm]): 0.37 Safe Temperature Range: 0í½50OC Compensated humidity Range: 20í½70%RH Safe Excitation Voltage: 12V DC Crosstalk: Less than 2% on all channels Sensitivity Change with Temperature:í_1%/ípC Fx, Fy, Fz hysteresis: í_ 1% Full Scale Output Fx, Fy, Fz non-linearity: í_ 1%Full Scale Output 400*600*117mm Net Weight: 35 Kg Packaged in carton
Applications An Electromyography (EMG) use EMG electrodes to pick up the electromyographic signal directly from the skin surface or within the subjects muscle using disposable fine-wire electrodes. Both are typically expressed in SI units micro Volt (mv). The Bioforcen-TB0810 model Biomechanics EMG can be used for biomechanics, engineering, medical research, orthopedics, rehabilitation evaluation, prosthetics, and general industrial uses. Specific uses include gait analysis, testing or stability analysis, neurological analysis, prosthetics fitting, athletic performance, shoe design, and force, power, and work studies. Description The EMG signal from each muscle is individually pre-amplified, band-pass filtered prior to digitization, and then converted to a binary sample for each of the channels. These operations are all performed directly in the subject back-pack to maximize signal quality. The binary information is then sent from the subject back-pack unit, via a single lightweight cable or wireless, to the desktop unit where it checked for transmission accuracy and then converted to an analog signal suitable for almost any analog data recording system. The desktop unit provides full electrical safety isolation for the subject. AMPLIFICATION The Bioforcen-TB0810 model Biomechanics EMG provides excitation and amplification for multiple channels in one convenient package. These amplifiers process the transducer signals and provide outputs suitable for an A/D converter so that the data can be stored and processed by a computer. CALIBRATION Each platform is inspected and tested in JUNE calibration facility. The calibration procedure provides a detailed sensitivity matrix and a complete test of all system components, including the amplifier and the connecting cable if ordered together. SOFTWARE Automated data collection and reduction requires a computer and software. Bioforcen-Analysis, Bioforcen-software package, is specifically designed for biomechanics . EMG channels: 8 High pass filter (1st order): 10 Hz Low pass filter (2nd order): 1000Hz (Butterworth) EMG signal input mode: Raw Signal (¡À3 mV) EMG signal output mode: Signal (0~2 V) EMG channel sample rate 500~4,000 samples per second per channel. Number of event switches: 8 switches, Independent of EMG channels Indicator Lights: USB ok, Status ok Safe Temperature Range: 0í½50OC Compensated humidity Range: 20í½70%RH Safe Excitation Voltage: 9 V DC 180*80*20mm Net Weight: 260g Packaged in aluminum alloy chest
We have many kinds of connector types, such as edwards, utah, argon, philips, ICU/ medex/ elcam/ abbot/ hospira/ biometrix, ace, bd etc, and also we produce monitor cable which have different connector. 30pcs per box
