Each other fully, with the long life span, excellent stability and high precision. 4.Converse installation: A.The structure is the same as the single way installation, which can control the lower gear precisely and long time Using can't cause it reverses; with extremely high stability and precision. B.Inaccurate feeding distance and the brake failure caused by the grease splashed during impact are impossible. C.High heat is hard to produce. D.Adopt the super hard alloy and roller; uneasy to be wore out. E.Roller runs in circle and the stuck can not be caused easily. F.Low friction, the rotation torque is reduced and the rotating mechanism can not be damaged easily. G.The converse installation speed reaches 30 meters/minute, and normally it is 20 meters/minute, which increase 50%. H.Special structure prolonged the lifespan Model Roller width Feeding length(mm) Material thickness (mm) Material line Height (mm) Press capacity Size Weight A B C D E F G M Lh-105ns 100 50 0-1.6 55-100 5-20 537 247 250 292 200 95 295 120 64 Lh-205ns 200 50 0-1.6 55-100 20 637 347 270 342 220 125 345 120 87 Lh-255ns 250 50 0-1.6 55-100 20 687 397 270 367 220 125 345 120 95 Lh-305ns 300 50 0-1.6 55-100 40 737 447 270 392 220 125 345 120 103 Lh-355ns 350 50 0-1.6 55-100 40 787 497 270 417 220 125 345 120 111 Lh-405ns 400 50 0-1.6 55-100 60 837 547 270 442 220 125 345 120 121 Lh-455ns 450 50 0-1.6 55-100 80 887 597 270 467 220 125 345 120 101 Lh-505ns 500 50 0-1.6 55-100 80 937 647 310 492 220 125 345 120 141 Lh-555ns 550 50 0-1.6 55-100 110 987 697 410 517 220 125 345 120
Steel mill scale
Skj series flat-die pellet mills are our patent products. This series pellet mills adopt advanced technology from germanic. The heart parts flat die and taper-shape press roller are made of high wearable alloy materials. The taper-shape press roller insure the mill reduce energy consumption and have a long lifetime. Skj series flat-die pellet mill adopts screw-center adjusting pressure structure; the pressed rollers gap can be adjusted small or big, so it can meet the different materials demand and make sure the pelleting effect. During processing, you can put different kinds of additives, amylum to expend. The pellet mill makes protein concretionary changeability which can enhance nutrition, be absorbed conveniently and kill general microbe. In iron
1. Micrograin carbide rod: WC=90%, Co=10%, TRS>3800N/mm2; Hardness>91.8HRA, Grain size: 0.6um; High quality of wearability and impact 2. Made by world latest 5-AXIS CNC tools grinder, promise the quality and precision of cutter. 3. Super TiAlN, reduce the coeffiction of friction, and improve the tools life much. 4. Each end mill is inspected by Zoller measuring and inspected machine. 5. Work Piece: Carbon steel, alloy steel, cast steel, tooling steel, mould steel, heat-treatment steel. Aluminum alloy steel, Non ferrous alloy
1. Micrograin carbide rod: Wc=90%, co=10%, trs>3800n/mm2; hardness>91.8hra, grain size: 0.6um; high quality of wearability and impact 2. Made by world latest 5-axis tools grinding machine, promise the quality and precision of cutter. 3. Super tialn, reduce the coeffiction of friction, and improve the tools life much. 4. Each end mill is inspected by zoller measuring and inspected machine. 6. Work piece: carbon steel, alloy steel, cast steel, tooling steel, mould steel, heat-treatment steel. Aluminum alloy steel, non ferrous alloy
1. Micrograin carbide rod: Wc=90%, co=10%, trs>3800n/mm2; hardness>91.8hra, grain size: 0.6um; high quality of wearability and impact 2. Made by world latest 5-axis cnc tools grinder, promise the quality and precision of cutter. 3. Super tialn, reduce the coeffiction of friction, and improve the tools life much. 4. Each end mill is inspected by zoller measuring and inspected machine. 5. Work piece: carbon steel, alloy steel, cast steel, tooling steel, mould steel, heat-treatment steel. Aluminum alloy steel, non ferrous alloy
1. Micrograin carbide rod: Wc=90%, co=10%, trs>3800n/mm2; hardness>91.8hra, grain size: 0.6um; high quality of wearability and impact 2. Made by world latest 5-axis tools grinding machine, promise the quality and precision of cutter. 3. Super tialn, reduce the coeffiction of friction, and improve the tools life much. 4. Each end mill is inspected by zoller measuring and inspected machine. 5. Work piece: carbon steel, alloy steel, cast steel, tooling steel, mould steel, heat-treatment steel. Aluminum alloy steel, non ferrous alloy
1. Micrograin carbide rod: Wc=90%, co=10%, trs>3800n/mm2; hardness>91.8hra, grain size: 0.6um; high quality of wearability and impact 2. Made by world latest 5-axis cnc tools grinder, promise the quality and precision of cutter. 3. Super tialn, reduce the coeffiction of friction, and improve the tools life much. 4. Each end mill is inspected by zoller measuring and inspected machine. 5. Work piece: carbon steel, alloy steel, cast steel, tooling steel, mould steel, heat-treatment steel. Aluminum alloy steel, non ferrous alloy
Model Speed of bucket (r/min) Weight of ball (t) Size of feed opening (mm) size of outputting feed (mm) Production (t/h) Power (Kw) Weight (t) 900 1800 38 1.5 20 0.075-0.89 0.65-2 18.5 3.6 900 3000 38 2.7 20 0.075-0.89 1.1-3.5 22 4.6 1200 2400 32 3.8 25 0.075-0.6 1.5-4.8 45 12.5 In bulk
Ball mill
Rotary kiln
Adopt closed high efficiency heat room , have noise circulation air blower , transfer to arm frequency conversion suit well the speed, Having no noise pollution-frely, the working environment is good, production efficiency is high, Products wall thick and even, can produce various kinds of specification plastic containers of different form, Good at and produce dysmorphism empty products of specially appearsing particularly. Shaping waving machine.
1. High efficiency : braking torque ranges from 900newton metres to 2200n.M(for example 900n.M, 1200n.M, 1500n.M, 1700n.M, 1900n.M, 2200n.M) adaptable for variety of wehicles, bus, van, and automobiles. 2. Low power consumption. A. Working voltage: 24v B. Working current: 70amper~ 120amper 3.Application: fit the weight ranges from 6 tons~26 tons for bus, vehicles. 4. Save cost: lower the possibility of the wear and tear of braking system. 5. Long life: made of imported original japan materials, which slight the heat deforming of the two rotor turntables, so the moment declining along with heat declining is light, which can work a long time. 6. Compact structure and flexible installation in gearbox or rear axle. 7. Digital controlling system ensures driving safety and stability. It will be much safer to drive. Various size & weight& dimension is available
(High Pressure Suspension Mill)High Pressure Suspension Mill are used to grind barite, limestone, kaolin, and ceramics and slag, whose Moh's hardness is below 9.3 scales, non-inflammable and non-explosive material. Features: 1) Our patent product 2) Product size is adjustable in the range of 80 - 425 meshes 3) Better design which reduces cost Models available: 1) YGM75 High Pressure Suspension Grinder Mill a) Number of roller: 3 b) Diameter of roller: 260mm c) Height of roller: 150mm d) Inside diameter of ring: 780mm e) Height of ring: 150mm f) Max. feeding size: 15mm g) Fineness of product: 0.613 - 0.033mm h) Capacity: 0.28 - 3.0MT http://www.grinderpro.com/product.html 2) YGM85 High Pressure Suspension Grinder Mill a) Number of roller: 3 b) Diameter of roller: 270mm c) Height of roller: 140mm d) Inside diameter of ring: 830mm e) Height of ring: 140mm f) Max. feeding size: 20mm g) Fineness of product: 0.613 - 0.033mm h) Capacity: 0.35 - 3.4MT i) Dimensions: 5,300 x 4,100 x 5,200mm 3) YGM95 High Pressure Suspension Grinder Mill a) Number of roller: 4 b) Diameter of roller: 310mm c) Height of roller: 170mm d) Inside diameter of ring: 950mm e) Height of ring: 170mm f) Max. feeding size: 25mm g) Fineness of product: 0.613 - 0.033mm h) Capacity: 1.5-5MT i) Dimension: 7,100 x 5,900 x 7,900mm 4) YGM130 High Pressure Suspension Grinder Mill a) Number of roller: 5 b) Diameter of roller: 410mm c) Height of roller: 210mm d) Inside diameter of ring: 1280mm e) Height of ring: 210mm f) Max. Feeding size: 30mm g) Dimensions: 9,200 x 7,250 x 9,700mm h) Capacity: 5-8MT
Model 3R2115 Max Feeding Size (mm) 15 The final products size (mesh) 80-325(finest 500) Capacity (T/H) 0.2-1.5 Rotational Speed of the Central Axis 160Rev The inner Diameter of Roller (mm) ¿¬630 The Diameter of Roller (mm) í-210 Height of Roller and Ring (mm) 150 Motor of Mainframe Y200L-8-15KW Motor of Air Blower Y132M-4-11KW Motor of Separator Y112M-6-2.2KW Dimension (L*W*H) 4.6*3.4*5.9
High-pressure Micro-powder Grinding Machine(fine powder mill) From VIPEAK can be used in grinding the regular material, such as kaoline, limestone, calcite, talcum, barite, gesso, ferric oxide red, ferric oxide green, aluminum hydroxide, pigment, bentonite, argil, coal and active carbon that Moh's hardness is below 4, and humidity is 8%, non-flammable explosive mineralsí» processing. The product size is between 500 meshes (25 micron) and 1250mesh, the finest to be 2500 meshes (5 micron) Models available: 1) YGM7826 High Pressure Micropowder Grinder a) Number of roller: 3 b) Diameter of roller: 260mm c) Height of roller: 150mm d) Inside diameter of ring: 780mm e) Height of ring: 150mm f) Feeding size:
Airgreat Nitrogen Generator with the PSA sophisticated machinery and technological innovation, providing low-cost and high-quality products of nitrogen gas. Nitrogen gas is the main component of air.Because it's difficult to react with other chemical substances, nitrogen gas is usually used as the protection gas in production, and is widely used in electronics, chemicals, coals, foodstuffs,pharmacies,magnetic materials, cables, metal processing, ports, transports, tires, thermoelectric, metallurgy, glass and other industries. 1130*750*2120mm 1000kg
SMT Nitrogen Generator with high purity of N2 could be regulated between 99.99% to 99.999% to meet needs of SMT production.Energy conservation, the power consumption of nitrogen per cubic meter is about 0.42 degree. Low dew point of product=-45'C to ensure the quality of welding. Standard models, simple compatibility.Inthe reflow solding of SMT, nitrogen gas is charged into reflow furnace. The following advantages of soldering are listed in the nitrogen atmosphere:The quality of soldering is enhanced with the prevention of surface oxidation. The flux is guaranteed to the correct activation. The remnants of flux is lower. The surface of soldering is more artistic. 1130*750*2120MM 1000KG
Vipeak High Pressure Midum Speed Grinder is suitable for grinding the barite, limestone, kaollnite, ceram and slags, etc. which below scale 9.3 of Moth and below 6% shadness and 280-odd sorts of non-inflammable and non-explosive stuff in the trades of mining, metallurgy, chemical engineering and building material for high fine powder generating and processing . The Product size is adjustable in the range of 80-425 mesh. It is possible to produce 30-80 mesh coarse powder through special device in the machine. High Pressure Midum Speed Grinder Features: 1. Having higher capacity of 20-30% relatively to Raymond mill, and Higher grinding force of rollers to stuffs because of high pressure springs.( notes for 5R4121: compared to 5R4119 raymond mill, at the same motor powder, capacity is improved to 10%, and Higher grinding force of rollers to stuffs because of high pressure springs.) 2.It can process the mineral stuffs of Moh's hardness below 9.3 grade. 3.The final products have a wide range, max. powders are up to 0.95mm(20mesh), mini ones are 0.038mm(400mesh). little pollution and dust collector efficiency is to national limitation. High Pressure Midum Speed Grinder Working process: large stuffs are delivered to bunker by elevator after crushed, then to chamber by electric feeder. In mainframe, shovels scoop up stuffs into the parts between rollers and ring, the processed powders are blowed up to analytical engine with wind entering chamber by blower, part of powders which can not be up the demand fineness will fall back to be grinded, left(that is final product) with airflow enter concentrator and divided with air then discharged from discharge vavle. Air returns to blower and circles, flowing in minus state.
On basis of many times experiments and improvement, introducing the latest mechanical techniques of Sweden , High Pressure Micropowder Grinding Mill, the latest industrial micro-powder grinding mill, is a new type grinding machine for producing micro-powder. Note: When users grind the material that hardness degree is between 4 and 6, the service life of the wearing parts will be shortened. Vipeak High Pressure Micro-powder Grinding Mill can grind calcite, limestone, calcite, dolomite, kaolin, bentonite, talc, illite, pyrophillite, barite, meerschaum, fluorite, potash ore and other more than 200 kinds of materials that Moh's hardness is below 6, non-explosive, non-flammable minerals. Features of High Pressure Micropowder Grinding Mill: 1 Energy-saving 2 Wide Application Range 3 Good craftmanship 4 Powder Fineness:
