Brief introduction 1. Fast processor Cpu is msm7627 aa and the system adopts android 4.0 ics operating system. 2. Strong protection for bad environment It can apply to the bad environment, which can resist multiple dropping impact from 1.2m high; apply to ip65 protection grade with good water-proof and dust-proof effect; durable and long life span. 3. Visible 3.5 inch lcd in the sunlight It is 3.5 inch vertical screen lcd, 480*640 high resolutions; with pressure sensitive touch screen and semi permeable tft lcd readable display. Its particular non glare and reflective technology make the work in the wild sunlight more easy and convenient. 4. The storage capacity is big and extensible Tf card supports no less than 8g cards, which can basically satisfy regular information and data storage. It adopts portable change design. There is no need to open the tester and you can remove the battery with the knob. The battery capacity is as high as 6000 mah. 5. Advanced battery installation design and strong endurance Due to the lithium battery capacity of 6000 mah and low-power design, the duration will be more than 3 days under routine operation. 6. Multi-functional module integration --the built-in fixed network test module can do adsl test, lan test and modem emulation. --5 million pixels camera makes the image data collection convenient. --support bluetooth, which is convenient provide data transmission between any compatible electronic equipment. --built-in gps module can realize the position location. --support 1d/2d red light/ laser bar codes scan. 7. Reliable process design It adopts advanced manufacturing process which is reliable and convenient to assemble. Paper carton package.
Function and usage It can set with 5 different temperature spots to do heat sealing, select the optimal heat healing temperature, and can also set the same temperature to speed up the heat sealing. Instrument structure: The structure of the heat-sealing tester is composed of 4 parts: pneumatic drive system, heat-sealing equipment, temperature adjustment system and time adjustment system. Pneumatic drive system: It includes pressure gauge, guide stick, cylinder, pneumatic valve, pressure regulating handle and so on. You can pull the pressure-regulating handle outward, rotate to the right side to adjust the heat sealing pressure to a high value, and rotate to the left side to reduce it. After setting the pressure, please press the handle to the side of mainframe to lock the air pressure. Heating-seal device It is composed of the upper and lower heat-sealing sticks, of which the upper one is connected with a cylinder. There is an insulating plate in the upper part, which can prevent heat transmit to the cylinder. The heat-sealing stick is made of aluminum, and the center is heater. There is a silica gel plate in the upper part of the lower heat-sealing stick, which can mitigate pressure impact during heat sealing. Temperature measurement system was installed at the back of the heat-sealing stick. Temperature adjustment system: The upper temperature controller controls the temperature of upper heat-sealing stick, and the rear temperature controller controls the temperature of lower heat-sealing stick. The temperature can be set at will through adjusting the button on the dial plate. Time adjustment system: Time adjustment system: The heat-sealing time can be set at will through adjusting the button on dial plate. The setting scope of time is 0.01s to 999.9h. Press the foot switch under the manual state, and the heat-sealing stick will be pressed together. Under the automatic state, the press-fitting time of upper and lower heat sealing sticks are controlled by a timer automatically, it can automatically recover later. The unit of timer is 0.1 second in general. There is time adjusting button on the panel of the timer, and the heat-sealing time can be adjusted at will. Specifications Power : AC220V 50HZ Compressed air: 8kg/cm2 Heat sealing plane: 300mm10mm slick (With silicon pad in lower seal stick) Heat sealing temperature: room temperature 20~300C (Precision 1C) Heat sealing time: 0.01s~99.99h Heat-sealing pressure: 0~0.8Mp. Dimension: 700(L)mm400(W)mm540(H)mm Weight: Desktop 30Kg. 700mm(L)X400mm(B)X540mm(H)
St332b tester is multi-functional hand-held adsl2+ test instrument with small size, specially designed for xdsl line test (xdsl include: adsl, adsl2, adsl2+ readsl etc) and maintenance it provides xdsl test, pppoe dial test, dmm test, modem emulation, line voltage indication and so on. The tester adopts lcd display and menu operation which can display the test results directly and improve the xdsl broadband service greatly. Itf+s the best choice for the field operators of installation and maintenance. Key features: 1) Test objects: adsl2+; adsl;adsl2;readsl 2) Multifunction: physical layer test; modem emulation ; pppoe dial ; dmm test; browse ip address information; determine telephone line faults (line break or mix) 3) Judge the quality of service 4) Data memory capacity: 50 records 5) LCD display 6) Menu operation 7) Simple, portable and money-saved. 8) Telephone functions, can detect incoming call, built-in earphone and microphone (optional). 160*76*28(mm).
ST3200 OTDR (Optical Time Domain Reflectometer) is an intelligent optical fiber communication tester. This tester is easy to use and portable, which has a 3.5-inch color LCD touching screen. It also possesses events intelligent analysis and more user---friendly operation. It is an ideal test instrument for the fiber testing and troubleshooting. It can test the length of optical fiber and optical fiber cable attenuation coefficient. It can exactly display the loss distribution curve of the optical fiber and cable as well as the loss between two points and the joint loss. It also can test the distance between two points and the position of joint, fault point as well as breaking point. This tester has VFL (Vision Fault Locating) system. So it becomes convenient to test the fault location of jumper wire. Main functions: * Test the distance between two points and dynamically display the distance between two cursors * Test the loss between two points and the loss constant of the optical fiber and cable * Test the joint loss * Auto-optimization and quick response * Search for the event points automatically * The function of wave form storage: it can store the wave form data and test condition into the disk and the stored information also can display again. * Support the function of copy: it can copy the data file which is built in the internal disk into the U-disk directly. D, w, h: 200mm, 100mm, 60mm.
Brief introduction: St805 pon power meter is specially designed for pon network construction and maintenance which can be connected between olt nad ont. The voice, data, video signal online can be measured and displayed synchronously with this meter. Key features 1. Test the three wavelength of the pon network synchronously: 1490nm, 1550nm, 1310nm 2. Can test the burst mode signal of 1310nm 3. Can set the threshold value, upload data, calibrate the wavelength through management software. 4. Can save 1000 records and upload the records to the management software 5. Supply 10 groups threshold values 6. En menu display 7. Auto shut off backlit 8. Real-time display Technical specifications Standard wavelength: 1310(up); 1490(down);1550(down) Pasband(nm):1260f+1360; 1470f+1505; 1535f+1570 Range(dbm): -40f++10; -40f++10; -40f++20 Isolation.1310nm++db++: ; >40; >40 Isolation.1490nm++db++: ; >40; >30 Isolation.1550nm++db++: ; >40; >40 Accuracy: Uncertainty++db++:F+0.5 Polarization relevant loss(db++:
St230f tel line tester is a portable and intelligent line fault tester, which adopts advanced technologies such as intelligent cpu, ic & smt technology. It integrates various kinds of functions such as telephone and line performance test to be the one. The incoming call number display function is compatible with fsk/dtmf two types. Its particular function of dc/ac voltage test can test whether there is dangerous dc/ac high voltage in the line or not quickly and accurately in order to protect lineman from high voltage. The tester is designed following the human engineering theory with the appearance style like barbell, it can be put on the shoulder, the lineman can do other work using hands at the same time; besides, it can be hung in the tool belt of waist through the pothook, it is convenient to realize the talk function cooperate with the high quality earphone when the lineman is climbing or doing other things; the max working duration when the inside rechargeable ni-mh battery is fully charged is 7 hours; the shell is made of the new type of material and it resists water and shock. Features: 1. Cid function, FSK/DTMF compatibility 2. Dtmf applying to GB/T15279-94 3. Dialing number display 4. Checking wire pairs function 5. Low voltage warning, automatic power off and energy-save design 6. Handsfree 7. Small size, simple operation. Quantity no limited /case pack Dimensions(mm): 232-73-95 Weight kg: 0.5.
Features: With latest patented technology Safe and time saving: non-contact phase sequence detection Multipurpose: with live wire examination,simple power inspection, phase deficiency judgment, breakpoints finding and line maintenance Dynamic LED display Sensitive and reliable. Specifications: Voltages: 70 to 600V AC Dimensions to be clamped: diameter 18mm.
Features: Widely applied in ground resistance measurement, loop resistance measurement With optional function of RS232 interface data upload No need to disconnect the ground wire from the ground net Without auxiliary electrode High accuracy and resolution With data memory Automatic power off Specifications: Clamp size: 65 x 32mm Resistance range: 0.01 to 1,200ohm; With automatic shifting Resistance resolution: 0.001ohm; Data memory: 99 sets Alarm setting: 1 to 199ohm; and buzzer alarm Quick boot: in 0.5 second With lower consumption.
1.Available for encoding, and for setup of the address for each DMX512 decoder module (SC-DMX-00xH/L) of own company; 2.Available for one-time setup of different addresses for the DMX512 control system consisted of by SC-DMX-00xH/L(DMX-512 decoder module) of own company; 3.Available for transmission single and multiple channel DMX512 signal; 4.Available for scene function, and for independent setup of DMX512 Start code and value of each channel; 5.Support transmission of DMX512 testing signal by 40Hz or 20Hz; 6.Available for receiving DMX512 signal and for separate display of 512 channels and their respective Start code. Technical specifications: Brand name SC-DMX-512 Communication protocol DMX512/1990 DMX512 I/O RJ45*2 Display 16*4 large screen LCD Power supply input DC 9V Rated power
Dimension (LxWxH): 223*92*45mm Weight (W/OBattery): 185g Ambient Condition: below 30-80%RH (w/o condensation) Battery: 6F-22 9V Metal Test (Ref.Value): Steel pipe(Diameter¦Õ15) Test Depth 24mm Voltage Test (Ref.Value): AC110V Depth 20mm AC220V Depth 20mm Wood Test (Ref.Value): Wood Framing (up to 15mm). Each item in one Double Blister 6 pcs / inner; 24 pcs/ctn inner ctn size: 31.5*18.5*31.5cm ctn size: 65.5*39.5*33cm Gw/Nw: 9/8 Kgs.
ZY 6058 Tracking Index Tester A. Introduction: This device applies to lighting equipment , low voltage electric appliance, household appliances, electric appliances , electric tools ,electronic instruments, electrical instruments , information technology research and production and quality department, also suitable for insulation materials , engineering plastic . electrical connectors, auxiliary parts industry. B. Standards: IEC60112, GB/T 4207, UL746A . C. Main parameters: 1. Testing chamber size :60cm*95cm*90cm (DxHxW) . 0.5M³. 2. Testing voltage : continuously adjustable during 100-600V, digital display. 3. Electrode :2 piece of platinum electrodes, 2mm*40mm*5mm (DxHxW). 30 inclined plane . 4. Distance between electrodes : 4.0mm. 5. Droplet equipment : interval time of droplet is adjustable 6. Pressure on surface :1.0 7. Max electricity : 3A 8. Outsize :61cm(D)x120cm(W)x105cm(H).
DTDL-8110 Cablefault Test Set is an integrated set of Cablefault Detection and Location Devices. It is applicable for many types of power cable, communication cable and optical cable. It can accurately measure the distance of cablefault and locate the fault point. The system includes: 1) DTDL-8110 Mainframe. 2) DTDL-8032R Receiver. 3) RF Inductive Tracking Rod. 4) Potential Difference Locating Rack with 2 pins. 5) AF Stethoscope and Headphones (for Listening mode). 6) Grounding Pin.
Parameters WEW-100 Accuracy 1% of indicated value Measuring range of force(kN) 2-100kN Subsection of force 1,2,5,10 Accuracy of deformation measurement 0.5%F.S Clamping diameter for round specimen(mm) ;6-22 Clamping width of flat specimen(mm) 40 Clamping thickness of flat specimen(mm) 0-15 Testing space Tension 550 Compression 500 Platen size 100 Distance of bending by pass roll(mm) 30-400 Piston stroke(mm) 250 Power supply : 50Hz Working environment Room temperature : relative humidity Overall dimension(mm) Frame machine730x500x2000 Control System 1070x810x1730 Weight(Kg) 1370
Digital control hydraulic compression testing machine 1. Maximum Testing Load: 600kN 2. Measuring Range of Load: (24-600) kN 3. Accuracy of Testing Load: 1% 7. Distance between Upper and Lower Platen: 225mm (Adjustable) 8. Size of Upper Compression Platen: 180mm 9. Size of Lower Compression Platen: 250mm 10. Piston Ram Stroke: 150mm 11. Power Supply: three phase, 380/220V;50/60Hz 12. Working Environment: 80% Overall dimension: Frame: 1120, 1650(MM) Weight: Frame:950kg
1. Maximum Testing Load: 2000kN 2. Measuring Range of Load: (80-2000) kN 3. Accuracy of Testing Load: 1% 4. Rate of Loading Speed: 0.5N/s~10kN/s 5. Accuracy of Rate of Loading Speed: 5% 6. Accuracy of constant testing Loading: 1% 7. Distance between Upper and Lower Platen: 500mm (Adjustable) 8. Size of Upper Compression Platen: 230;280mm 9. Size of Lower Compression Platen: 230;280mm 10. Piston Ram Stroke: 200mm 11. Power Supply: three phase, 380/220V;50/60Hz 12.Working Environment: 80% Overall dimension: Frame: 1115 Control System : 187; Weight: Frame:4850kg, 200kg
his series testing machine is suitable for tensile, compression, bending, shearing, peeling and tearing test of metal and nonmetal materials, such as rubber, plastic, electrical wire and cable, composite, profiled bar, bar metal, board, spring, components and so on. It confirms to ISO 75001ú¼ASTM A370, ASTM E4 ASTM E8 and JIS, DIN, BSEN testing standards. AD800 in this machine is whole digit multi center closed loop measuring and control system. It adequately absorbs advanced functional characteristics and integrates the latest international professionally developed measuring and control system. Control software can automatically finger out routine data, such as tensile strength, yield strength, modulus of elasticity, extend rate after rupture, non-proportional extend strength RP0.2, etc. It can adopt many kinds of controlling modes, such as constant force, constant displacement, constant deformation, and real time display many testing curves of force-displacement, force-time, stress-strain. These curves automatically switch. Testing process control and data processing conform to the requirements of International standards. This machine is beautiful, multifunctional, safe and easy. Parameters: WDW-1 WDW-2 WDW-5 Maximum force: 1KN 2KN 5KN Accuracy: í_í+1% (0.5% as special order) Measuring range of force (KN): 0.2%--100%FS Resolution of force: 1/200000 of maximum force and no subsection of all scale Accuracy of displacement measuring: í+0.5% Resolution of displacement: 0.03ª¦m Speed adjusting range of displacement: 0.001-500mm/min Accuracy of deformation measuring: í+0.5% Range of deformation measuring: 2%í½100%FS Speed adjusting range of force; 0.005-5%F.S / S Speed controlling accuracy of force: ¿Qí+2.0% of the set value (speedú+0.05%FS/S) ¿Qí+0.5%/í+1.0% of the set value ( speed¿R0.05%FS/S) Speed adjusting range of deformation: 0.005-5%FS/S Speed controlling accuracy of deformation:¿Qí+2.0% of the set value (speedú+0.05%FS/S) ¿Q í+0.5% of the set value ( speed¿R0.05%FS/S) Valid tension testing space: 800 Compression testing space: 700 Clamping sample: Flat and round sample Power supply: 380V/220ú¼50/60Hz Working environment: Room temperature 10íµí½30íµ, relative humidityí_80% Base configuration : Panasonic servo motor, precision photoelectric encoder Weight(Kg): 300
Test load: 0.098N (10gf), 0.246N (25gf), 0.49N (50gf), 0.98N (100gf), 1.96N (200gf), 2.94N (300gf), 4.90N (500gf), 9.80N (1000gf) Leus/indenter switch: With hand Turret Carriage control: Automatic loading and unloading method Magnification of microscope: For measurement: 400X (Object lens 40x , eyepiece 10x) For observation:200X (object lens 20x, eyepiece 10x) Load holding time: 5-60 second Measuring microscope: Min measuring unit: 0.0625um Testing field: 1-2967HV Micro test table: Dimensions 100x100mm Movement: 25mm in X&Y axis Max. height of specimen: 70mm ; Max. depth of specimen: 95mm Output: Installed with innner-printer and RS232 interface ; Power Supply: AC110V/220V 60/50HZ Dimensions: (L ) 425 X (W) 245X (H)490mm; Gross Weight:: 42KG, Net Weight: 35KG
2m transmission analyzer Basic functions 2m measurement Hdb3 and ami line codes Out-of-service 2mb/s, n*64kb/s ber testing In-service framed and unframed double-channel testing Pcm simulator''mode testing Frame data control and monitoring Timeslot activity monitoring, fas, n-fas, ts16mfo analysis Built-in 64kb/s tone channel listen capability Cas and ccs signaling generation and monitoring Round trip delay measurement Aps delay measurement Extensive error and alarm generation Vf tone generation and measurement Level measurement Pulse mask measurement Jitter measurements to itu-t standard o. 172 Frequency and offset measurement Clock slip measurement Up to +/-999ppm transmit clock deviation Clock source: internal, interface or external 2m clock/signal Real-time transmit circuit open/short indication
Product Description TLD1500 Series is high quality of Optical Fiber Checker. It contains the most advanced laser technology and microelectronics technology, and can be measured with various fiber optic adapter with 2.5mm common Interface. It is very convenient for them to check the single-mode and multimode fiber. Features High visible red laser output Easy-to-use "quick access" interface Small size, light weight, high reliability Battery for power supply Suitable for all 2.5 mm optical fiber connector Applications Fiber production and research devices Fiber network testing and maintenance Optical communication teaching and test
Product Features; Six Impact Devices are available for special applications(D,DC,D+15,C,DL,G) Direct display of hardness scales HRB,HRC,HV,HB,HS,HL; Software to connect with PC and Dataview for PC operation; Automatic identification Impact Devices and test direction (Except G); Software data and upperlower limits setting and sound alarm; Time and date setting; auto-clock; On-Board memory holds 240-1000 groups of data; Integral thermal printer, print all test results and histogram; For all metallic materials; Li Battery , low voltage indication and sound alarm; LCD with blue back-light, showing all functions and parameters; Wide measuring range; Long standby time and stable performance of field work; Technical specifications: Hardness Scale:HL,HRC,HRB,HV,HB,HS Accuracy:í+4HLD(760í+20HLD) repeatability of displayed value Standard Impact Device:D limits set measuring range:(170~960)HLDD Optional Impact Devices:C DC D+15 DL G Operating Temperaturee:0~40 Statistics Function:Average Max Min calculation,limits setting and alarm Testing direction:Automatic Min.thickness of hardened:0.8mm Chargeing time:3~5hours Power:Li Battery 4.2V/1600mAh Charger:5V/500mA Overall Dimensions:147*69*23mm Weight:186g Computer Interface:RS232 Min.Workpiece thickness:5mm (D DC DL D+15)1mm (C)10mm (G) memory:240~1000 groups Min.Workipece Weight:2~5Kg on stable support 0.05~2Kg with compact coupling Min.Radius of Workpiece:Rmin=50mm(with support ring Rmin=10mm) Max.Workpiece Hardnesss:996HV (D DC D+15 DL C) 646HB (G) Continuous Working Time:About 200hours
