2 in 1 meters measure average values of DC Voltage or DC Current. Any two different parameters can be measured in one case with this meter. It is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).
2in1 meters measure two different ranges of frequencies in the range of 45 to 450Hz. For maximum accuracy, the essential measuring range is obtained by suppressing unwanted frequency span. The meter is housed in UL94V-0 approved polycarbonate case and can be mounted in Mosaic mounting.
Analog Meters measure AC/DC Voltage or Current and frequency. These meters are installed on 35mm Din rail, the mounting width is 45mm and it is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).
ML14xx is Multiload Monitor with 12 single phase load or 4 three phase load option. It measures important electrical parameters of multiple loads simultaneously in a single unit, eliminating the need and cost of multiple panel meters. It provides quick, easy and error free current connections with plug and play connectors. It measures real time electrical parameters like Active / Reactive / Apparent energy and power, current, THD, demand, max demand for each load. The instrument has 4 configurable relay outputs, which can be used for Limit / Pulse / Residual Current / 3Phase Load Health Monitoring / Tariff / RTC / Timer tripping or alarms. This instrument communicates with either MODBUS or Ethernet connection
Description UT200+ series handheld automatic range true RMS clamp meter, designed according to safety standard EN61010-2010 CAT II600V/CAT III 300V grade, with full-function gear anti-burn protection, can meet high reliability and high safety operation requirements; It contains the basic functions of electrical measurement, with high precision measurement, and expands the current frequency (UT201+ / UT202+ only), high voltage frequency function, UT202+ has temperature measurement function, UT203+ has DC current measurement function, and the new design makes it An excellent measurement tool for electronic and electricians with superior performance Features: Large screen LCD display, fast ADC / analog to digital converter Full-featured false detection protection, overvoltage, overcurrent alarm prompt True RMS; voltage measurement 600V With high voltage frequency measurement AC current measurement function With current frequency measurement function (UT201+/UT202+UT202A+ only) Temperature measurement function (UT202+/UT204+ only) Capacitance measurement function (UT202+max 4mF/UT203+max 40mF/UT202A+/UT204+max 60mF) NCV electric field detection with sound and light alarm prompt; LIVE live line measurement (UT202A+/UT204+ only) Specification Range UT201+ UT202+ UT202A+ UT203+ UT204+ AC current (A) 400A (2%+10) (2%+10) (2.5%+5) 600A (2%+10) (2.5%+5) AC current frequency (Hz) 50Hz~100Hz (1%+5) (1%+5) (1%+5) DC current (A) 400A (2.5%+5) 600A (2.5%+5) AC voltage (V) 600V (0.8%+5) (0.8%+5) (0.8%+5) (0.8%+5) (0.8%+5) AC voltage frequency(Hz) 10Hz~10kHz (1%+5) (1%+5) (1%+5) 10Hz~60kHz (0.5%+2) (0.5%+2) DC voltage (A) 600V (0.5%+2) (0.5%+2) (0.5%+2) (0.5%+2) (0.5%+2) Resistance (�©) 40M�© (0.8%+2) (0.8%+2) (0.8%+2) 60M�© (0.8%+2) (0.8%+2) Capacitance (F) 4mF (4%+5) 40mF (4%+5) 60mF (4%+5) (4%+5) Temperature () -40~1000 (1.5%+5) (1.5%+5) Frequency (Hz) 10Hz~10MHz (0.1%+4) (0.1%+4) (0.1%+4) Features Display count 4000 4000 6000 4000 6000 Auto range Jaw opening 28mm 28mm 28mm 28mm 28mm True RMS NCV Live wire test Continuity test Diode MAX/MIN Relative mode Zero mode Data hold Low battery indication Auto power off General Characterisitics Power 1.5V battery (R03) x 2(Not included for air shipping) Display 37mm x 25mm Product color Red and grey Product net weight UT203+:235g Product size 215mm x 63mm x 36mm Standard accessories UT203+: test leads, Standard individual packing Gift box, Carring bag, English manual
UNI T True RMS Digital Multimeter 6000Counts Auto/ Manual Range AC/DC Tester UNI T True RMS Digital Multimeter UT15B /UT17B PRO 6000Counts Auto/ Manual Range AC/DC 1000V/10A Resistance Frequency Diode Frequency Diode Temperature VFC Tester Backlight Data hold Flashlight UT15B PRO / UT17B PRO is a high-reliability true RMS digital multimeter.The product has a built-in VFC anti-jamming start mode, which can filter out the carrier frequency interference or distortion voltage signal superimposed by the sine wave, and stably measure the output voltage of the inverter. And equipped with a hand-automatic backlight induction self-starting function. UT17B PRO has added frequency and duty cycle modes, which can switch frequency and duty measurement arbitrarily between DC / AC. It is also equipped with a temperature measurement function with a resolution of 0.1 The full range of functions of this series of products realizes the misdetection protection of up to 30KVA energy, ensuring users are safer and more reliable in operation,and obtained CETLus certification according to the CAT III 1000V / CAT IV 600V safety level. Features 1.6000 display digits / true effective value measurement range is wider 2. Large screen LCD display, easy to read data; 3.1000V AC / DC voltage measurement 4. VFC frequency conversion voltage measurement 600V (low pass) strong anti-interference; 5.LED flashlight, automatic induction backlight, to deal with dark environment 6.60M resistance measurement / 6000uF capacitance measurement 7.100kHz frequency / duty cycle (UT17B PRO only) 8. Temperature measurement (UT17B PRO only) 9. Diode / on / off beep 10. Manual / automatic range 11. Max / Min / Relative 12. Current gear protection: equipped with fused fuse 440mA / 11A 1000V fuse 13. Dangerous voltage warning function, easier to use 14. CAT III1000V / CAT IV600V safety level double insulation design.
Product overview Pipe type ultrasonic flowmeter is composed of a main body and a pipe segment type sensor. The DN15-DN32 uses a -type pipe segment sensor, and the DN40 and above uses a standard pipe segment sensor. The pipe-type ultrasonic flowmeter has the advantages of simple installation, low starting flow, high measurement accuracy, and no pressure loss. The main unit can be installed in the wall, instrument box, and distribution box with a protection level of IP67. The external clip sensor is installed on the surface of the pipe and selects different sensors. The applicable diameter is DN15~DN6000mm. Product features 1. Simple installation, no need for professional workers 2. High precision and low price 3. Can work in humid and water-immersed environment
GMF200 Series Ultrasonic Flowmeter Model GMF200-D Principle Ultrasonic time difference principle Precision ±1% Display 4x8 Chinese or 4x16 Western dot matrix backlit LCD, supporting Chinese, English, Italian and French languages Output 1 channel OCT pulse output (pulse width 6-1000ms, default 200ms) Data interface Isolating the RS-232 application interface, the flow meter can be upgraded through a PC Pipe Steel, stainless steel, cast iron, copper, PVC, aluminum, fiberglass, and other dense pipes, allowing lining Pipe inner diameter 15-6000mm Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, from the pump outlet 30D (D is the pipe diameter) Medium Water, sea water, sewage, acid and alkali, alcohol, beer, various oils, etc. Fluid temperature -30~+160�°C Turbidity 1000pmm bubble content is small Flow rate 0±10m/s Working environment Host: -20 ~ +60 C; flow sensor: -30 ~ +160 C Host: 85% RH; sensor protection grade: IP67 Power supply 3-cell rechargeable Ni-MH battery with 1.2V capacity of 2000mAH, which can work continuously for more than 12 hours every time. Power consumption 1W Housing material Flame retardant ABS Host weight 390g
GMF200-H series hand-held ultrasonic flowmeter realizes non-contact measurement of liquid flow. Install the sensor on the outer wall of the pipe to complete the flow measurement. With small size, easy to carry, accurate measurement and so on. Widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow calibration, temporary detection, flow inspection, water meter balance debugging, heating network balance debugging, and energy saving monitoring. It is a necessary tool for timely flow detection.
Product Description ADL10-E Single Phase Electric Energy Meter General ADL rail- installation Electricity meters is a new generation electricity meter developed by Acrel Co,.Ltd, resulting from many years experience in designing Electricity meters. LCD display and electricity pulse output function is installed in the power meter; clock, rate period parameters can be set also. Data swap with the super ordination machine via RS485 communication interface greatly facilitate the power automated administration. This power meter has advantages of smaller volume, high precision, good EMC, easy installation etc, meet the related technical requirements of electronic power meter in the IEC62053-21,IEC 62053-22 standard. Technical Parameters Voltage Reference voltage AC 220V Reference frequency 45-65 Hz Consumption
Product Description ADL10-E Single Phase Electric Energy Meter General ADL rail- installation Electricity meters is a new generation electricity meter developed by Acrel Co,.Ltd, resulting from many years experience in designing Electricity meters. LCD display and electricity pulse output function is installed in the power meter; clock, rate period parameters can be set also. Data swap with the super ordination machine via RS485 communication interface greatly facilitate the power automated administration. This power meter has advantages of smaller volume, high precision, good EMC, easy installation etc, meet the related technical requirements of electronic power meter in the IEC62053-21,IEC 62053-22 standard. Technical Parameters Voltage Reference voltage AC 220V Reference frequency 45-65 Hz Consumption
Product Description ADL10-E Single Phase Electric Energy Meter General ADL rail- installation Electricity meters is a new generation electricity meter developed by Acrel Co,.Ltd, resulting from many years experience in designing Electricity meters. LCD display and electricity pulse output function is installed in the power meter; clock, rate period parameters can be set also. Data swap with the super ordination machine via RS485 communication interface greatly facilitate the power automated administration. This power meter has advantages of smaller volume, high precision, good EMC, easy installation etc, meet the related technical requirements of electronic power meter in the IEC62053-21,IEC 62053-22 standard. Technical Parameters Voltage Reference voltage AC 220V Reference frequency 45-65 Hz Consumption
Product Description ADL10-E Single Phase Electric Energy Meter General ADL rail- installation Electricity meters is a new generation electricity meter developed by Acrel Co,.Ltd, resulting from many years experience in designing Electricity meters. LCD display and electricity pulse output function is installed in the power meter; clock, rate period parameters can be set also. Data swap with the super ordination machine via RS485 communication interface greatly facilitate the power automated administration. This power meter has advantages of smaller volume, high precision, good EMC, easy installation etc, meet the related technical requirements of electronic power meter in the IEC62053-21,IEC 62053-22 standard. Technical Parameters Voltage Reference voltage AC 220V Reference frequency 45-65 Hz Consumption
Product Description ADL10-E Single Phase Electric Energy Meter General ADL rail- installation Electricity meters is a new generation electricity meter developed by Acrel Co,.Ltd, resulting from many years experience in designing Electricity meters. LCD display and electricity pulse output function is installed in the power meter; clock, rate period parameters can be set also. Data swap with the super ordination machine via RS485 communication interface greatly facilitate the power automated administration. This power meter has advantages of smaller volume, high precision, good EMC, easy installation etc, meet the related technical requirements of electronic power meter in the IEC62053-21,IEC 62053-22 standard. Technical Parameters Voltage Reference voltage AC 220V Reference frequency 45-65 Hz Consumption
Product Description ADL10-E Single Phase Electric Energy Meter General ADL rail- installation Electricity meters is a new generation electricity meter developed by Acrel Co,.Ltd, resulting from many years experience in designing Electricity meters. LCD display and electricity pulse output function is installed in the power meter; clock, rate period parameters can be set also. Data swap with the super ordination machine via RS485 communication interface greatly facilitate the power automated administration. This power meter has advantages of smaller volume, high precision, good EMC, easy installation etc, meet the related technical requirements of electronic power meter in the IEC62053-21,IEC 62053-22 standard. Technical Parameters Voltage Reference voltage AC 220V Reference frequency 45-65 Hz Consumption
Product Description ADL10-E Single Phase Electric Energy Meter General ADL rail- installation Electricity meters is a new generation electricity meter developed by Acrel Co,.Ltd, resulting from many years experience in designing Electricity meters. LCD display and electricity pulse output function is installed in the power meter; clock, rate period parameters can be set also. Data swap with the super ordination machine via RS485 communication interface greatly facilitate the power automated administration. This power meter has advantages of smaller volume, high precision, good EMC, easy installation etc, meet the related technical requirements of electronic power meter in the IEC62053-21,IEC 62053-22 standard. Technical Parameters Voltage Reference voltage AC 220V Reference frequency 45-65 Hz Consumption
Product: DD28 MECHANICAL kWH METER Specifications: Model Number: DD28 Accuracy: Class 2.0 Rated Voltage: 220 Volt Rated Current: 10(30-40)Amp Starting Current: 0.5%Ib Rated Frequency: 50 Hz Constant: 600 rev/kWH Power Loss( Under no current): 2W Meter Base: Black Clock Steel Meter Main Cover: Non Transparent( Black Cover) Meter Terminal: Short or Extended Meter Terminal Material: Copper Voltage Coil Material: Copper Current Coil Material: Copper Wire Protection: The Voltage and current coil connecting wire must be insulated with a cover on it Magnet: Big Size Magnet suitable for 30 A to balance the rotation of the wheel. Size and Dia. of Voltage and Current Coil: As per IEC design to bear 30 Amp continuous current Meter Terminal Size: As per IEC norms with continuous current bearing capacity of 30 Ampere Meter Register: 5 Digits ( 4 Integer , 1 Decimal) Meter Bearing: Jewell Quality: Excellent Serial Number: Each DD 28 must have serial number on its name plate Design Standard: GB/T15283-2008 & IEC 521
Microcapsule phase change materials Phase change materials will become liquid in the process of heat absorption. In order to meet the environment without liquid requirements, such as textile cloth, electrical appliances and mobile phones, we further developed microcapsule phase change materials. It is contained in an inert capsule called microencapsulation. By increasing the heat transfer area, microencapsulation reduces the responsiveness of PCM to the external environment, prevents the leakage of PCM when it is in liquid state, and has the advantages of stable performance and long service life, which are favored by the market.
Microcapsule phase change materials Phase change materials will become liquid in the process of heat absorption. In order to meet the environment without liquid requirements, such as textile cloth, electrical appliances and mobile phones, we further developed microcapsule phase change materials. It is contained in an inert capsule called microencapsulation. By increasing the heat transfer area, microencapsulation reduces the responsiveness of PCM to the external environment, prevents the leakage of PCM when it is in liquid state, and has the advantages of stable performance and long service life, which are favored by the market.
Shanghai Cloud chemical industry co., ltd. is a company focusing on high-end chemical research and development and customization. The company is located in Shanghai zhangjiang high-tech park, the laboratory has nearly 20 senior staff, including 2 doctors in the United States. The company's main research and development of phase change materials and new high-strength polyurea coatings have been in the world's leading level. The particle size and enthalpy of microencapsulated phase change materials are much higher than those of similar products in the United States. Widely used in textile, household appliances, construction, transportation, medical and other fields. At present, our products have been exported to Europe and the United States, India, the industry praise. Our aim is to have the courage to innovate, make technological breakthroughs, and develop greener and more energy-saving products.
