Manual Household kebab maker easy to use possible to use by electricity and using on the fire have one aluminum mold maximum weight of kebab is 100gr electricity power: 110 v- 220v
Meat skewer / Meat chicken skewer / Manual Household Meat chicken kebab skewer Specification 1. High quality meat skewer machine. It adopts the newest technology at home and abroad. 2. The skewer can be bamboo or wood. The meat can also be all different kinds of meat such as mutton, beef, pork and fish 3. The machine has a scientific structure, simple operation, high reliability 4. Stainless steel, anti-rust and anti-corrosion 5- Dimension: 80*30*25cm 6- Capacity: 5pcs/time 7- Weight: 20 kg
Spit Washer Machine AS300V: This machine is used to washing kebab spits without manual task. Specifications and advantages of full-steel triple layer skewer washing machine Model AS300V: - To observe the principles of health and full washing of skewers without remaining any spot or fat. - Set output: to wash 300 skewers in 20 minutes. - It does not require any skilled worker. - It save water and washing timer. - After fully washing the skewers, the machine shall be automatically turn off. - As it is triple layers, it has the lowest acoustic pollution. Technical specification of full-steel triple layer skewer washing machine Model AS300V: - Machine dimension: length 135 cm, width 52 cm and height 88 cm. - All parts are made of stainless steel. - Machine cover is made stainless steel sheet. - The engine power is transferred bye gear box. - Electromotor power 1HP. - It has water vacation hose. - It is equipped with timer and conductor.
Technical specification of Manual Radiative Barbecue Model: AS1100K3 - Capacity of production: 30 kebabs at each time - Dimensions: length 175 cm, width 50 cm, height 150 cm - Weight: 140 kg - Body Cover: Stainless Steel - Optimum consumption of gas - Ability to adjust the height of the cooking surface - The ability of cooking some kind of kebabs and chicken at the same time
Technical specification of Meat skewer Machine - Capacity of production: 400 skews of boneless meat and chicken in an hour -Making meat and chicken in different weights by wood and steel skews - higher Speed Of production in opposite of manual mode - Optimal design and small dimensions - - Dimensions: length 70 cm, width 110 cm, height 130 cm - Pneumatic system - Weight: 80 kg
battery cell sorting machine Contact: JESSIE AT SAWATECH DOT COM DOT CN spot welding machine for 18650 battery spot welding machine for 18650 pack or 18650 cell pouch low speed car and E-bike battery pack automatic line power tool and garden tool battery pack auto production line lithium battery cell spot welding machine battery cell auto sorting machine auto label barley paper machine power tool lithium battery assembly line auto soldering machine 18650 li ion battery welding machine
This stainless steel kurkure slanty frying machine is one automatic frying machine, with the function of automatic discharging, gas or electric heating, automatic stirring. The main body of machine uses SUS304 stainless steel. This is multi-purpose frying machine can fry kurkure, slanty, namkeen, cheetos, murukku Chakli, bonda, potato chips, french fries, banana plantain chips, etc
This vegetable and fruit washing peeling machine is mainly for wahsing and peeling potato, carrot, sweet potato, cassava, taro, yam, ginger, white radish, apple, peach, etc. The round and microscler vegetables and fruits. This brush type vegetable fruit washing peeling machine is with large effective volume, high efficiency, water saving, suitable for the continuous cleaning operations.
Automatic Frozen French Fries Machine|Cassava Potato Sticks Processing Plant is mainly used to produce potato french fries using fresh potato, which can be used to process frozen french fries or pre-fried fries. The complete french fries production line is consisted of Potato washing peeling machine, french fry cutter machine, blanching machine, air dewatering machine, french fries fryer Machine, vbrate de-oil machine, air drying machine, french fries flavoring machine and packaging machine.
The complete potato chips production line/potato crisps manufacturing equipment is all made of 304 stainless steel. The same set of potato chips machinery can also be used to make plantain chips only chaging the peeling machine. 1.Elevator, 2.Washing and peeling machine, 3.Picking line, 4.Elevator, 5.Potato cutting machine, 6.Rinsing line, 7.Blanching machine, 8.Dewatering machine, 9.Oil-water mixed frying machine, 10.Vibration de-oiling, 11.De-oiling machine, 12. seasoning machine, 13. Picking line, 14. Automatic potato chips pacakaging machine.
The BW2000 model walnut processing line is design for cracking walnut and get pure kernels. The machine consisits of huller, pre-separator, un-hulled cycling system, inspection belt, kernels grading machine, et. We tested varieties like Sunland, Payne, FRANQUETTE, Eureka with very satisfactory performance. The unique three-point-cracking technology enables a precise handling to get higher yield of butterfly kernels. For more information, Please contact with our staff.
The soybean peeling machine is a patent product designed for large volume soybean food industry. The soybean peeling machine features: 1. Higher peeling rate and lower powdering. After peeling, the peel(husk or testa), cotyledon and hilum are perfectly separated. 2. Higher processing capacity: Single machine can process 100--300TPD. 3. The process route is much sorter then others. The equipment occupies less spaces with simple operation and lower power consumption. 4. Safe and easy operation and maintainence.
The machine uses high-speed rotating emery to cut and rub the soybean cortex continuously, which destroys the bonding strength between soybean endosperm and embryo, and gets high quality hulled soybeans. Used for all scale of bean peeling plant. Soybean processing plant features: 1.Scientific design, attractive appearance; 2.Advanced design, stable mechanical function, low noise; 3.Compact structure, assemble and disassemble easily; 4.Unique roller design, outstanding peeling performance; 5.Strong negative pressure peeling, neat peeling, low breakage, high accuracy; 6.Inlet and outlet can be fine-turned, easy operation; 7.Adopt oil sealing rubber skeleton, axis running smoothly and longer bearing life.
The sunflower seed processing line Model TFKH1200 is a patent product. This equipment provides an integral solution for sunflower seed kernels Industry. It combines cleaner, de-huller and separators so that the seeds can be processed without assistance of other machines. There are two de-hullers applied in this equipment, which is more efficient than its previous models. It features of little broken rate and thoroughly separation of shells. All the processes are automatically fulfilled by just pressing a few buttons. The maintenance is quite easy as well as the operation. Component There are totally 11 parts: feed-in hopper, spiral elevator, cleaner, bucket elevator, main de-hulling part, separators (3sets), in-shell seeds cycling system, kernel collecting trough and electric control cabinet.
This machine is specially designed for barley processing. Through rubbing, grinding and cutting processes, it separates skin barley kernels. It is easy to operate, high peeling performance rate, low loss or wastage, no wear parts designed to decrease the maintenance cost. It is composed of peeling chamber, pressure control system, aspiration system, and kernel receiving system. With this one machine, it can automatically finish peeling, separation, and dust control etc. The machine can also be used on beans and lentils. This machine can work independently. We can design parallel lines for larger capacity. Specification Production capacity: 500~600kg/hour Motor power: 11kw-4p Main motor speed: 1400R/M Machine net dimension: 1380x1080x2170mm Net weight: 580kg Packing size Wood case packing dimension: 1470x1180x2270mm CBM:3.94m3 Gross weight: 630kg
The equipment is our Patented product with independent intellectual property, which contains 3 national patents. It can be used to de-hull and remove shells. The seeds are processed in a continuous circle. Un-hulled seeds can be delivered automatically to next round processing. In 2011, we innovated the huller and the processing capacity enlarged by 15%. The machine is working in Bulgaria, Mexico, USA and Guatemala. In 2014 we re-designed the machine to get higher efficiency and lower cost. Welcome to contact our sales representatives. Component The equipment consists of feed-in hopper, bucket elevator, huller, shells collector, positive pressure separator, and electric control cabinet. Main parameter Power : 5.59kw /8.59Kw (380V) Integral kernels rate : 95% min. (Broken kernel is less than 1/2 of whole kernel) Content of seeds in the kernels : 2--4% max. Content of kernels in shells : 0.3% max. Production (output): 150-200kg/h Occupied area : 6.4m X 2.9m Height: 3.5m/3.7M Weight: 2.5T/3.0T Operator: 2 persons
Functions The equipment is our Patented product with independent intellectual property, which contains 3 national patents. It can be used to de-hull and remove shells. The seeds are processed in a continuous circle. Un-hulled seeds can be delivered automatically to next round processing. In 2011, we innovated the huller and the processing capacity enlarged by 15%. The machine is working in Bulgaria, Mexico, USA and Guatemala. In 2014 we re-designed the machine to get higher efficiency and lower cost. Welcome to contact our sales representatives. Component The equipment consists of feed-in hopper, bucket elevator, huller, shells collector, positive pressure separator, and electric control cabinet. Main parameter Power : 5.59kw /8.59Kw (380V) Integral kernels rate : 95% min. (Broken kernel is less than 1/2 of whole kernel) Content of seeds in the kernels : 2--4% max. Content of kernels in shells : 0.3% max. Production (output): 100-150kg/h Occupied area : 6.4m X 2.9m (TFHB150) Height: 3.5m/3.7M Weight: 2.5T/3.0T Operator: 2 persons
After processing, you will get three products:corn grits, corn powder and husk. Percentage of three products: Grits about 45-55%, Powder about 20-30%, husk and germ about 25%. Total yield: 75% Min. Specification of finished product: Fineness of corn powder: 40-150 mesh(adjustable) Meganetic metal content: 0.003g/kg max. Moisture:13.5-14.5%
This machine consists of ultra low speed, no broken elevator, vertical air screen, cyclone dedusting system, large proportion platform, vibrating and grading screen. It can remove dust, chaff, shell and other light impurities. It can also remove the blighted seed, budding seed, damaged seed (by insect), rotten seed, deteriorated seed, moldy seed, non-viable seed, seed with black powder sick. After the large and small impurities have removed, the finished product can be divided into best, medium and small particles. Features 1. This machine can replace gravity separator, reduce the load of gravity table and increase production further. 2. For the processing of wheat, rice, corn, soybean, sorghum and other commodity grains, productivity can reach 20t/h, and can remove more than 90% kinds of light impurities from grain. 3. Complete wind selection, gravity selection, screening and grading, which can save energy and reduce consumption and labor. 4. Environmental cyclone duster system and without a lot of dust leakage. 5. It can be equipped with elevator, screw conveyor and belt conveyor.
Based on the multi-module parallel processing structure, RB series color sorter has adopted latest CCD sensor, advanced optical sorting cabinet, tailor-made high speed mini-ejector system, instant video frequency control algorithm and reliable network transmission protocol. Sorting result index of the machine has been greatly improved. Touch panel display offers a friendly and informative interface. Apart from providing the normal sorting functions, the machine features largely in the following points. Main Features color sorter for sunflower seed / kernels Integrated processing system and high speed numeric processor make fine sorting result and long-term machine stability. color sorter for sunflower seed / kernels Multi-calibration, conforming arithmetic contributes to intelligent processing system. color sorter for sunflower seed / kernels Special optical system, flexible sorting modes setting available for different raw material at users disposal; exceptionally good in simultaneously sorting of yellow and milky grain. color sorter for sunflower seed / kernels Embedded operation system offers friendly interface, easy operation. color sorter for sunflower seed / kernels Adopt high-sensitivity sensor and special algorithm to effectively remove macula. For assisting the color sorter, you need to build a platform with no more than 1.5M height. Two elevators are required. We recommend our latest No-Damage-Elevator: one is Z shape, the other is C shape. One compressor is also required. Technical Parameter Channels: 240 Processing capacity: 1.0-2.0T/Hr. Sorting accuracy(%): ï¼?99.6% Optimized carryover (bad:good): ï¼?8:1 Channels preset for primary sorting and re-sorting: 160:80 Voltage: 220V(50Hz) Power Total: 2.2Kw (for sorter only) Air pressure : ï¼?0.6-0.8Mpa Air consumption:ï¼?2.5m3/min. Weight: 850kg Dimension (LÃ?WÃ?H):1920mmÃ?1410mmÃ?2040mm Note: all the performance data listed above is taken the 5% impurities sunflower seed kernels of China origin. Varietie
